configure.in

   1 AC_INIT(dump/dump.h)
   2 AC_PREREQ(2.57)
   3
   4 MCONFIG=./MCONFIG
   5 AC_SUBST_FILE(MCONFIG)
   6
   7 AC_CONFIG_HEADER(config.h)
   8
   9 dnl
  10 dnl Check for programs
  11 dnl
  12 AC_PROG_MAKE_SET
  13 AC_PROG_LN_S
  14 AC_PATH_PROG(CP, cp, cp)
  15 AC_PATH_PROG(MV, mv, mv)
  16 AC_PATH_PROG(RM, rm, rm)
  17 AC_CHECK_TOOL(AR, ar, ar)
  18 AC_CHECK_TOOL(RANLIB, ranlib, :)
  19 AC_CHECK_TOOL(PATCH, patch, :)
  20 AC_PROG_CC
  21 AC_PROG_INSTALL
  22
  23 AC_CHECK_HEADERS([sys/types.h])
  24
  25 CPPFLAGS="-D_BSD_SOURCE -D_USE_BSD_SIGNAL ${CPPFLAGS}"
  26
  27 dnl
  28 dnl Handle --enable-debug
  29 dnl
  30 AC_ARG_ENABLE([debug],
  31 [  --enable-debug             include debugging code (default is NO)],
  32 if test "$enableval" = "no"
  33 then
  34         DUMPDEBUG=""
  35         RESTOREDEBUG=""
  36         echo "Not including debugging code"
  37 else
  38         DUMPDEBUG="-DFDEBUG -DTDEBUG -DWRITEDEBUG -DDIRDEBUG"
  39         RESTOREDEBUG="-DDIRDEBUG"
  40         echo "Including debugging code"
  41 fi,
  42 DUMPDEBUG=""
  43 RESTOREDEBUG=""
  44 echo "Not including debugging code by default"
  45 )
  46 AC_SUBST(DUMPDEBUG)
  47 AC_SUBST(RESTOREDEBUG)
  48
  49 dnl
  50 dnl Handle --enable-static
  51 dnl
  52 AC_ARG_ENABLE([static],
  53 [  --enable-static            link dump and restore statically (default is NO)],
  54 if test "$enableval" = "no"
  55 then
  56         STATIC=""
  57         echo "Linking dump and restore dynamically"
  58 else
  59         STATIC="-static"
  60         echo "Linking dump and restore statically"
  61 fi
  62 ,
  63 STATIC=""
  64 echo "Linking dump and restore dynamically by default"
  65 )
  66 AC_SUBST(STATIC)
  67
  68 dnl
  69 dnl Handle --enable-staticz
  70 dnl
  71 AC_ARG_ENABLE([staticz],
  72 [  --enable-staticz           link libz and libbz2 statically (default is NO)],
  73 if test "$enableval" = "no"
  74 then
  75         STATICZ="no"
  76         echo "Linking libz and libbz2 dynamically"
  77 else
  78         STATICZ="yes"
  79         echo "Linking libz and libbz2 statically"
  80 fi
  81 ,
  82 STATICZ="no"
  83 echo "Linking libz and libbz2 dynamically by default"
  84 )
  85
  86 dnl
  87 dnl Handle --enable-rmt
  88 dnl
  89 AC_ARG_ENABLE([rmt],
  90 [  --enable-rmt               compile and install rmt (default is YES)],
  91 if test "$enableval" = "no"
  92 then
  93         RMTDIR=""
  94         RMTMAKEFILE=""
  95         echo "Not compiling rmt"
  96 else
  97         RMTDIR="rmt"
  98         RMTMAKEFILE="rmt/Makefile"
  99         echo "Compiling rmt"
 100 fi
 101 ,
 102 RMTDIR="rmt"
 103 RMTMAKEFILE="rmt/Makefile"
 104 echo "Compiling rmt by default"
 105 )
 106 AC_SUBST(RMTDIR)
 107
 108 dnl
 109 dnl Handle --enable-ermt
 110 dnl
 111 AC_ARG_ENABLE([ermt],
 112 [  --enable-ermt              compile ermt, an encrypting version of rmt (default is NO)],
 113 if test "$enableval" = "no"
 114 then
 115         ERMT=""
 116         CRYPTO=""
 117         echo "Not compiling ermt"
 118 else
 119         if test "$RMTDIR" = ""
 120         then
 121                 AC_MSG_ERROR(ermt requires --enable-rmt)
 122         fi
 123         ERMT="ermt"
 124         CRYPTO="-lcrypto"
 125         echo "Compiling ermt"
 126 fi
 127 ,
 128 ERMT=""
 129 CRYPTO=""
 130 echo "Not compiling ermt by default"
 131 )
 132 AC_SUBST(ERMT)
 133 AC_SUBST(CRYPTO)
 134
 135 dnl
 136 dnl Handle --enable-kerberos
 137 dnl
 138 AC_ARG_ENABLE([kerberos],
 139 [  --enable-kerberos          compile kerberos extensions (default is NO)],
 140 if test "$enableval" = "yes"
 141 then
 142         OPTDEFS="-DKERBEROS"
 143         echo "Compiling kerberos extensions"
 144 else
 145         OPTDEFS=""
 146         echo "Not compiling kerberos extensions"
 147 fi
 148 ,
 149 OPTDEFS=""
 150 echo "Not compiling kerberos extensions by default"
 151 )
 152 AC_SUBST(OPTDEFS)
 153
 154 dnl
 155 dnl Handle --enable-readline
 156 dnl
 157 AC_ARG_ENABLE([readline],
 158 [  --enable-readline          enable readline support in restore (default is YES)],
 159 if test "$enableval" = "no"
 160 then
 161         READLINE=""
 162         echo "Not including readline support"
 163 else
 164         READLINE="yes"
 165         AC_DEFINE([HAVE_READLINE],1,[Define if you want to include readline support.])
 166         echo "Including readline support"
 167 fi
 168 ,
 169 READLINE="yes"
 170 AC_DEFINE([HAVE_READLINE],1,[Define if you want to include readline support.])
 171 echo "Including readline support by default"
 172 )
 173
 174 dnl
 175 dnl Handle --enable-oldsylefscript
 176 dnl
 177 AC_ARG_ENABLE([oldstylefscript],
 178 [  --enable-oldstylefscript   enable old style F script (no arguments) (default is NO)],
 179 if test "$enableval" = "yes"
 180 then
 181         AC_DEFINE([OLD_STYLE_FSCRIPT],1,[Define this is you want old style F script (no arguments).])
 182         echo "Using old style F script"
 183 else
 184         echo "Using new style F script"
 185 fi
 186 ,
 187 echo "Using new style F script by default"
 188 )
 189
 190 dnl
 191 dnl Handle --enable-largefile
 192 dnl
 193 AC_ARG_ENABLE([largefile],
 194 [  --enable-largefile         enable Large File System support (default is YES)],
 195 if test "$enableval" = "yes"
 196 then
 197         AC_DEFINE([USE_LFS],1,[Define this if you want Large File System support.])
 198         echo "Enabling Large File System support"
 199 else
 200         echo "Not enabling Large File System support"
 201 fi
 202 ,
 203 AC_DEFINE([USE_LFS],1,[Define this if you want Large File System support.])
 204 echo "Enabling Large File System support by default"
 205 )
 206
 207 dnl
 208 dnl Handle --enable-qfa
 209 dnl
 210 AC_ARG_ENABLE([qfa],
 211 [  --enable-qfa               enable Quick File Access support (default is YES)],
 212 if test "$enableval" = "yes"
 213 then
 214         AC_DEFINE([USE_QFA],1,[Define this if you want Quick File Access support.])
 215         echo "Enabling Quick File Access support"
 216 else
 217         echo "Not enabling Quick File Access support"
 218 fi
 219 ,
 220 AC_DEFINE([USE_QFA],1,[Define this if you want Quick File Access support.])
 221 echo "Enabling Quick File Access support by default"
 222 )
 223
 224 dnl
 225 dnl Handle --enable-qfadebug
 226 dnl
 227 AC_ARG_ENABLE([qfadebug],
 228 [  --enable-qfadebug          include Quick File Access debugging code (default is NO)],
 229 if test "$enableval" = "yes"
 230 then
 231         AC_DEFINE([DEBUG_QFA],1,[Define this if you want to include Quick File Access debugging code.])
 232         echo "Including Quick File Access debugging code"
 233 else
 234         echo "Not including Quick File Access debugging code"
 235 fi
 236 ,
 237 echo "Not including Quick File Access debugging code by default"
 238 )
 239
 240 dnl
 241 dnl Handle --enable-macosx
 242 dnl
 243 AC_ARG_ENABLE([macosx],
 244 [  --enable-macosx            include Mac OSX restore compatibility (default is NO)],
 245 if test "$enableval" = "yes"
 246 then
 247         AC_DEFINE([DUMP_MACOSX],1,[Define this if you want to include Mac OSX restore compatibility.])
 248         echo "Including Mac OSX restore compatibility code"
 249 else
 250         echo "Not including Mac OSX restore compatibility code"
 251 fi
 252 ,
 253 echo "Not including Mac OSX restore compatibility code by default"
 254 )
 255
 256
 257 dnl
 258 dnl set $(CC) from --with-cc=value
 259 dnl
 260 AC_ARG_WITH([cc],
 261 [  --with-cc=COMPILER         select compiler to use],
 262 AC_MSG_RESULT(CC=$withval)
 263 CC=$withval,
 264 if test -z "$CC" ; then CC=cc; fi
 265 [AC_MSG_RESULT(CC defaults to $CC)])dnl
 266 export CC
 267 AC_SUBST([CC])
 268
 269 dnl
 270 dnl set $(LD) from --with-linker=value
 271 dnl
 272 AC_ARG_WITH([linker],
 273 [  --with-linker=LINKER       select linker to use],
 274 AC_MSG_RESULT(LD=$withval)
 275 LD=$withval,
 276 if test -z "$LD" ; then LD=$CC; fi
 277 [AC_MSG_RESULT(LD defaults to $LD)])dnl
 278 export LD
 279 AC_SUBST([LD])
 280
 281 dnl
 282 dnl set $(CCOPTS) from --with-ccopts=value
 283 dnl
 284 AC_ARG_WITH([ccopts],
 285 [  --with-ccopts=CCOPTS       select compiler command line options],
 286 AC_MSG_RESULT(CCOPTS is $withval)
 287 CCOPTS=$withval
 288 CFLAGS="$CFLAGS $withval",
 289 CCOPTS=)dnl
 290 AC_SUBST(CCOPTS)
 291
 292 dnl
 293 dnl set $(LDFLAGS) from --with-ldopts=value
 294 dnl
 295 AC_ARG_WITH([ldopts],
 296 [  --with-ldopts=LDOPTS       select linker command line options],
 297 AC_MSG_RESULT(LDFLAGS is $withval)
 298 LDOPTS=$withval
 299 LDFLAGS="$LDFLAGS $withval",
 300 LDOPTS=)dnl
 301 AC_SUBST(LDOPTS)
 302
 303 dnl
 304 dnl set $(BINOWNER) from --with-binowner
 305 dnl
 306 AC_ARG_WITH([binowner],
 307 [  --with-binowner=USER       select owner for binaries],
 308 AC_MSG_RESULT(BINOWNER is $withval)
 309 BINOWNER=$withval,
 310 BINOWNER=root
 311 echo "BINOWNER defaults to $BINOWNER"
 312 )dnl
 313 AC_SUBST(BINOWNER)
 314
 315 dnl
 316 dnl set $(BINGRP) from --with-bingrp
 317 dnl
 318 AC_ARG_WITH([bingrp],
 319 [  --with-bingrp=GROUP        select group for binaries],
 320 AC_MSG_RESULT(BINGRP is $withval)
 321 BINGRP=$withval,
 322 BINGRP=tty
 323 echo "BINGRP defaults to $BINGRP"
 324 )dnl
 325 AC_SUBST(BINGRP)
 326
 327 dnl
 328 dnl set $(BINMODE) from --with-binmode
 329 dnl
 330 AC_ARG_WITH([binmode],
 331 [  --with-binmode=MODE        select mode for binaries],
 332 AC_MSG_RESULT(BINMODE is $withval)
 333 BINMODE=$withval,
 334 BINMODE=0755
 335 echo "BINMODE defaults to $BINMODE"
 336 )dnl
 337 AC_SUBST(BINMODE)
 338
 339 dnl
 340 dnl set $(MANOWNER) from --with-manowner
 341 dnl
 342 AC_ARG_WITH([manowner],
 343 [  --with-manowner=USER       select owner for manual pages],
 344 AC_MSG_RESULT(MANOWNER is $withval)
 345 MANOWNER=$withval,
 346 MANOWNER=man
 347 echo "MANOWNER defaults to $MANOWNER"
 348 )dnl
 349 AC_SUBST(MANOWNER)
 350
 351 dnl
 352 dnl set $(MANGRP) from --with-mangrp
 353 dnl
 354 AC_ARG_WITH([mangrp],
 355 [  --with-mangrp=GROUP        select group for manual pages],
 356 AC_MSG_RESULT(MANGRP is $withval)
 357 MANGRP=$withval,
 358 MANGRP=tty
 359 echo "MANGRP defaults to $MANGRP"
 360 )dnl
 361 AC_SUBST(MANGRP)
 362
 363 dnl
 364 dnl set $(MANMODE) from --with-manmode
 365 dnl
 366 AC_ARG_WITH([manmode],
 367 [  --with-manmode=MODE        select mode for manual pages],
 368 AC_MSG_RESULT(MANMODE is $withval)
 369 MANMODE=$withval,
 370 MANMODE=0644
 371 echo "MANMODE defaults to $MANMODE"
 372 )dnl
 373 AC_SUBST(MANMODE)
 374
 375 dnl
 376 dnl set $(DUMPDATESPATH) from --with-dumpdatespath
 377 dnl
 378 AC_ARG_WITH([dumpdatespath],
 379 [  --with-dumpdatespath=PATH  select path for dumpdates file],
 380 AC_MSG_RESULT(DUMPDATESPATH is $withval)
 381 DUMPDATESPATH=$withval,
 382 DUMPDATESPATH="${sysconfdir}/dumpdates"
 383 echo "DUMPDATESPATH defaults to $DUMPDATESPATH"
 384 )dnl
 385 AC_SUBST(DUMPDATESPATH)
 386
 387 dnl
 388 dnl Check for Ext2fs headers and libraries
 389 dnl
 390 AC_CHECK_HEADER(ext2fs/ext2fs.h, [ext2fs_h=yes], [ext2fs_h=no], [-])
 391 AC_CHECK_LIB(ext2fs, ext2fs_open, [ext2fs_lib=yes], [ext2fs_lib=no], [-lcom_err])
 392 if test "$ext2fs_h" = no -o "$ext2fs_lib" = no; then
 393         AC_MSG_ERROR(You need to install the Ext2fs libraries from the E2fsprogs distribution first - hint: make install-libs)
 394 fi
 395
 396 dnl
 397 dnl Try to use ext2_fs.h header from libext2fs instead of from the kernel
 398 dnl
 399 AC_CHECK_HEADERS(ext2fs/ext2_fs.h, [], [], [-])
 400
 401 dnl
 402 dnl Check for ext2_ino_t type
 403 dnl
 404 AC_MSG_CHECKING(for ext2_ino_t type in libext2fs headers)
 405 AC_TRY_COMPILE([#include <stdio.h>
 406 #ifdef HAVE_EXT2FS_EXT2_FS_H
 407 #include <ext2fs/ext2_fs.h>
 408 #else
 409 #include <linux/ext2_fs.h>
 410 #endif
 411 #include <ext2fs/ext2fs.h>],
 412 [ext2_ino_t ino = 0;],
 413 [AC_DEFINE([HAVE_EXT2_INO_T],1,[Define if we have the ext2_ino_t type (from e2fsprogs 1.20+).])
 414  AC_MSG_RESULT(yes)],
 415 AC_MSG_RESULT(no))
 416
 417 dnl
 418 dnl Check for s_journal_inum field in ext2_super_block struct
 419 dnl
 420 AC_MSG_CHECKING(for s_journal_inum field in ext2_super_block struct)
 421 AC_TRY_COMPILE([#include <stdio.h>
 422 #ifdef HAVE_EXT2FS_EXT2_FS_H
 423 #include <ext2fs/ext2_fs.h>
 424 #else
 425 #include <linux/ext2_fs.h>
 426 #endif
 427 #include <ext2fs/ext2fs.h>],
 428 [struct ext2_super_block es; es.s_journal_inum = 0;],
 429 [AC_DEFINE([HAVE_EXT2_JOURNAL_INUM],1,[Define if we have the s_journal_inum field in struct ext2_super_block.])
 430  AC_MSG_RESULT(yes)],
 431 AC_MSG_RESULT(no))
 432
 433 dnl
 434 dnl Check for blkid headers libraries
 435 dnl
 436 AC_CHECK_HEADER(blkid/blkid.h, [blkid_h=yes], [blkid_h=no], [-])
 437 AC_CHECK_LIB(blkid, blkid_get_devname, [blkid_lib=yes], [blkid_lib=no], [-luuid])
 438 if test "$blkid_h" = yes -a "$blkid_lib" = yes; then
 439         AC_DEFINE([HAVE_BLKID],1,[Define this if you have the blkid library.])
 440         BLKID="-lblkid -luuid"
 441 fi
 442 AC_SUBST(BLKID)
 443
 444 dnl
 445 dnl Check for ncurses or termcap libraries
 446 dnl
 447 AC_CHECK_LIB(ncurses, tgetent, [ncurses_lib=yes], [ncurses_lib=no])
 448 AC_CHECK_LIB(termcap, tgetent, [termcap_lib=yes], [termcap_lib=no])
 449
 450 if test "$ncurses_lib" = no -a "$termcap_lib" = no; then
 451         if test "$READLINE" = "yes"; then
 452                 AC_MSG_ERROR(You need to install the ncurses or termcap library or configure without --enable-readline)
 453         fi
 454 fi
 455 if test "$ncurses_lib" = yes; then
 456         rdllib="-lncurses"
 457 elif test "$termcap_lib" = yes; then
 458         rdllib="-ltermcap"
 459 fi
 460
 461 dnl
 462 dnl Check for readline headers and libraries
 463 dnl
 464 AC_CHECK_HEADER(readline/readline.h, [readline_h=yes], [readline_h=no], [-])
 465 AC_CHECK_LIB(readline, readline, [readline_lib=yes], [readline_lib=no], $rdllib)
 466 if test "$readline_h" = no -o "$readline_lib" = no; then
 467         if test "$READLINE" = "yes"; then
 468                 AC_MSG_ERROR(You need to install the GNU readline library or configure without --enable-readline)
 469         fi
 470 fi
 471 if test "$READLINE" = yes; then
 472         READLINE="-lreadline $rdllib"
 473 fi
 474 AC_SUBST(READLINE)
 475
 476 dnl
 477 dnl Check for rl_completion_matches
 478 dnl
 479 AC_CHECK_LIB(readline, rl_completion_matches, [rlcm=yes], [rlcm=no], "-ltermcap")
 480 if test "$rlcm" = yes; then
 481         AC_DEFINE([HAVE_READLINE_RLCM],1,[Define this if your readline libs have the rl_completion_matches library.])
 482 fi
 483
 484 dnl
 485 dnl Check for rl_completion_append_character
 486 dnl
 487 AC_CHECK_LIB(readline, rl_completion_append_character, [rcac=yes], [rcac=no], "-ltermcap")
 488 if test "$rcac" = yes; then
 489         AC_DEFINE([HAVE_READLINE_CAC],1,[Define this if your readline libs have the rl_completion_append_character variable.])
 490 fi
 491
 492 dnl
 493 dnl Check for zlib headers and libraries
 494 dnl
 495 AC_CHECK_HEADER(zlib.h, [zlib_h=yes], [zlib_h=no], [-])
 496 AC_CHECK_LIB(z, compress2, [zlib_lib=yes], [zlib_lib=no])
 497 if test "$zlib_h" = yes -a "$zlib_lib" = yes; then
 498         if test "$STATICZ" = yes; then
 499                 ZLIB="-Wl,-Bstatic -lz -Wl,-Bdynamic"
 500         else
 501                 ZLIB="-lz"
 502         fi
 503         AC_DEFINE([HAVE_ZLIB],1,[Define this if you have zlib compression library.])
 504 else
 505         ZLIB=""
 506 fi
 507 AC_SUBST(ZLIB)
 508
 509 dnl
 510 dnl Check for bzlib headers and libraries
 511 dnl
 512 AC_CHECK_HEADER(bzlib.h, [bzlib_h=yes], [bzlib_h=no], [-])
 513 AC_CHECK_LIB(bz2, BZ2_bzBuffToBuffCompress, [bzlib_lib=yes], [bzlib_lib=no])
 514 if test "$bzlib_h" = yes -a "$bzlib_lib" = yes; then
 515         if test "$STATICZ" = yes; then
 516                 BZLIB="-Wl,-Bstatic -lbz2 -Wl,-Bdynamic"
 517         else
 518                 BZLIB="-lbz2"
 519         fi
 520         AC_DEFINE([HAVE_BZLIB],1,[Define this if you have bzlib compression library.])
 521 else
 522         BZLIB=""
 523 fi
 524 AC_SUBST(BZLIB)
 525
 526 dnl
 527 dnl Check for library functions
 528 dnl
 529 AC_CHECK_FUNCS(err errx verr verrx vwarn vwarnx warn warnx realpath lchown)
 530 AC_CHECK_FUNC(glob)
 531
 532 dnl
 533 dnl Check for GLOB_ALTDIRFUNC
 534 dnl
 535 AC_MSG_CHECKING(for extended glob routines)
 536 if test "$ac_cv_func_glob" = "yes"; then
 537         AC_EGREP_CPP(yes,
 538         [
 539 #       include <glob.h>
 540 #       ifdef GLOB_ALTDIRFUNC
 541         yes
 542 #       endif
 543         ],
 544         [
 545         AC_DEFINE([HAVE_GLOB],1,[Define if you have the glob function.])
 546         AC_MSG_RESULT(yes)
 547         ],
 548         [
 549         AC_MSG_RESULT(no)
 550         echo "Your system does not support extended glob, will use the internal routines"
 551         ])
 552 fi
 553
 554 dnl
 555 dnl Check for OpenSSL, for ermt
 556 dnl
 557 if test "$ERMT" != ""; then
 558         AC_CHECK_HEADER(openssl/evp.h, [evp_h=yes], [evp_h=no])
 559         AC_CHECK_LIB(crypto, EVP_CIPHER_CTX_set_padding, [crypto_lib=yes], [crypto_lib=no])
 560         if test "$evp_h" = no -o "$crypto_lib" = no; then
 561                 AC_MSG_ERROR(You need to install the OpenSSL library (version 0.9.7a or later), or configure without --enable-ermt)
 562         fi
 563 fi
 564
 565 dnl
 566 dnl Check for types
 567 dnl
 568 AC_CHECK_TYPE(quad_t, int64_t)
 569 AC_CHECK_TYPE(u_quad_t, uint64_t)
 570
 571 dnl
 572 dnl Compute top_buildir
 573 dnl
 574 top_builddir=`cd .; pwd`
 575 AC_SUBST(top_builddir)
 576
 577 dnl
 578 dnl Create directories
 579 dnl
 580 test -d compat || mkdir compat
 581 test -d compat/lib || mkdir compat/lib
 582
 583 dnl
 584 dnl Output files
 585 dnl
 586 AC_OUTPUT(MCONFIG Makefile common/Makefile compat/include/Makefile compat/lib/Makefile dump/Makefile restore/Makefile $RMTMAKEFILE)