]>
Commit | Line | Data |
---|---|---|
5e993f12 | 1 | Index: AtmarkTechno/SUZAKU/hardware/etc/fast_runtime.opt |
2 | =================================================================== | |
3 | RCS file: /var/cvs/uClinux-dist/vendors/AtmarkTechno/SUZAKU/hardware/etc/fast_runtime.opt,v | |
4 | retrieving revision 1.1.1.1 | |
5 | diff -u -p -r1.1.1.1 fast_runtime.opt | |
6 | --- AtmarkTechno/SUZAKU/hardware/etc/fast_runtime.opt 16 Nov 2004 10:51:27 -0000 1.1.1.1 | |
7 | +++ AtmarkTechno/SUZAKU/hardware/etc/fast_runtime.opt 6 Jan 2007 09:05:57 -0000 | |
8 | @@ -1,81 +1,81 @@ | |
9 | -FLOWTYPE = FPGA;\r | |
10 | -###############################################################\r | |
11 | -## Filename: fast_runtime.opt\r | |
12 | -##\r | |
13 | -## Option File For Xilinx FPGA Implementation Flow for Fast\r | |
14 | -## Runtime.\r | |
15 | -## \r | |
16 | -## Version: 4.1.1\r | |
17 | -## $Header: /cvs/sw/new-wave/vendors/AtmarkTechno/SUZAKU/hardware/etc/fast_runtime.opt,v 1.1 2004/04/30 11:02:52 davidm Exp $\r | |
18 | -###############################################################\r | |
19 | -#\r | |
20 | -# Options for Translator\r | |
21 | -#\r | |
22 | -# Type "ngdbuild -h" for a detailed list of ngdbuild command line options\r | |
23 | -#\r | |
24 | -Program ngdbuild \r | |
25 | --p <partname>; # Partname to use - picked from xflow commandline\r | |
26 | --nt timestamp; # NGO File generation. Regenerate only when\r | |
27 | - # source netlist is newer than existing \r | |
28 | - # NGO file (default)\r | |
29 | --bm <design>.bmm # Block RAM memory map file\r | |
30 | -<userdesign>; # User design - pick from xflow command line\r | |
31 | --uc <design>.ucf; # ucf constraints\r | |
32 | -<design>.ngd; # Name of NGD file. Filebase same as design filebase\r | |
33 | -End Program ngdbuild\r | |
34 | -\r | |
35 | -#\r | |
36 | -# Options for Mapper\r | |
37 | -#\r | |
38 | -# Type "map -h <arch>" for a detailed list of map command line options\r | |
39 | -#\r | |
40 | -Program map\r | |
41 | --o <design>_map.ncd; # Output Mapped ncd file\r | |
42 | -#-fp <design>.mfp; # Floorplan file\r | |
43 | -<inputdir><design>.ngd; # Input NGD file\r | |
44 | -<inputdir><design>.pcf; # Physical constraints file\r | |
45 | -END Program map\r | |
46 | -\r | |
47 | -#\r | |
48 | -# Options for Post Map Trace\r | |
49 | -#\r | |
50 | -# Type "trce -h" for a detailed list of trce command line options\r | |
51 | -#\r | |
52 | -Program post_map_trce\r | |
53 | --e 3; # Produce error report limited to 3 items per constraint\r | |
54 | -#-o <design>_map.twr; # Output trace report file\r | |
55 | --xml <design>_map.twx; # Output XML version of the timing report\r | |
56 | -#-tsi <design>_map.tsi; # Produce Timing Specification Interaction report\r | |
57 | -<inputdir><design>_map.ncd; # Input mapped ncd\r | |
58 | -<inputdir><design>.pcf; # Physical constraints file\r | |
59 | -END Program post_map_trce\r | |
60 | -\r | |
61 | -#\r | |
62 | -# Options for Place and Route\r | |
63 | -#\r | |
64 | -# Type "par -h" for a detailed list of par command line options\r | |
65 | -#\r | |
66 | -Program par\r | |
67 | --w; # Overwrite existing placed and routed ncd\r | |
68 | --ol 4; # Overall effort level\r | |
69 | --d 0; # Number of delay based cleanup passes\r | |
70 | -<inputdir><design>_map.ncd; # Input mapped NCD file\r | |
71 | -<design>.ncd; # Output placed and routed NCD\r | |
72 | -<inputdir><design>.pcf; # Input physical constraints file\r | |
73 | -END Program par\r | |
74 | -\r | |
75 | -#\r | |
76 | -# Options for Post Par Trace\r | |
77 | -#\r | |
78 | -# Type "trce -h" for a detailed list of trce command line options\r | |
79 | -#\r | |
80 | -Program post_par_trce\r | |
81 | --e 3; # Produce error report limited to 3 items per constraint\r | |
82 | -#-o <design>.twr; # Output trace report file\r | |
83 | --xml <design>.twx; # Output XML version of the timing report\r | |
84 | -#-tsi <design>.tsi; # Produce Timing Specification Interaction report\r | |
85 | -<inputdir><design>.ncd; # Input placed and routed ncd\r | |
86 | -<inputdir><design>.pcf; # Physical constraints file\r | |
87 | -END Program post_par_trce\r | |
88 | -\r | |
89 | -\r | |
90 | +FLOWTYPE = FPGA; | |
91 | +############################################################### | |
92 | +## Filename: fast_runtime.opt | |
93 | +## | |
94 | +## Option File For Xilinx FPGA Implementation Flow for Fast | |
95 | +## Runtime. | |
96 | +## | |
97 | +## Version: 4.1.1 | |
98 | +## $Header: /cvs/sw/new-wave/vendors/AtmarkTechno/SUZAKU/hardware/etc/fast_runtime.opt,v 1.1 2004/04/30 11:02:52 davidm Exp $ | |
99 | +############################################################### | |
100 | +# | |
101 | +# Options for Translator | |
102 | +# | |
103 | +# Type "ngdbuild -h" for a detailed list of ngdbuild command line options | |
104 | +# | |
105 | +Program ngdbuild | |
106 | +-p <partname>; # Partname to use - picked from xflow commandline | |
107 | +-nt timestamp; # NGO File generation. Regenerate only when | |
108 | + # source netlist is newer than existing | |
109 | + # NGO file (default) | |
110 | +-bm <design>.bmm # Block RAM memory map file | |
111 | +<userdesign>; # User design - pick from xflow command line | |
112 | +-uc <design>.ucf; # ucf constraints | |
113 | +<design>.ngd; # Name of NGD file. Filebase same as design filebase | |
114 | +End Program ngdbuild | |
115 | + | |
116 | +# | |
117 | +# Options for Mapper | |
118 | +# | |
119 | +# Type "map -h <arch>" for a detailed list of map command line options | |
120 | +# | |
121 | +Program map | |
122 | +-o <design>_map.ncd; # Output Mapped ncd file | |
123 | +#-fp <design>.mfp; # Floorplan file | |
124 | +<inputdir><design>.ngd; # Input NGD file | |
125 | +<inputdir><design>.pcf; # Physical constraints file | |
126 | +END Program map | |
127 | + | |
128 | +# | |
129 | +# Options for Post Map Trace | |
130 | +# | |
131 | +# Type "trce -h" for a detailed list of trce command line options | |
132 | +# | |
133 | +Program post_map_trce | |
134 | +-e 3; # Produce error report limited to 3 items per constraint | |
135 | +#-o <design>_map.twr; # Output trace report file | |
136 | +-xml <design>_map.twx; # Output XML version of the timing report | |
137 | +#-tsi <design>_map.tsi; # Produce Timing Specification Interaction report | |
138 | +<inputdir><design>_map.ncd; # Input mapped ncd | |
139 | +<inputdir><design>.pcf; # Physical constraints file | |
140 | +END Program post_map_trce | |
141 | + | |
142 | +# | |
143 | +# Options for Place and Route | |
144 | +# | |
145 | +# Type "par -h" for a detailed list of par command line options | |
146 | +# | |
147 | +Program par | |
148 | +-w; # Overwrite existing placed and routed ncd | |
149 | +-ol 4; # Overall effort level | |
150 | +-d 0; # Number of delay based cleanup passes | |
151 | +<inputdir><design>_map.ncd; # Input mapped NCD file | |
152 | +<design>.ncd; # Output placed and routed NCD | |
153 | +<inputdir><design>.pcf; # Input physical constraints file | |
154 | +END Program par | |
155 | + | |
156 | +# | |
157 | +# Options for Post Par Trace | |
158 | +# | |
159 | +# Type "trce -h" for a detailed list of trce command line options | |
160 | +# | |
161 | +Program post_par_trce | |
162 | +-e 3; # Produce error report limited to 3 items per constraint | |
163 | +#-o <design>.twr; # Output trace report file | |
164 | +-xml <design>.twx; # Output XML version of the timing report | |
165 | +#-tsi <design>.tsi; # Produce Timing Specification Interaction report | |
166 | +<inputdir><design>.ncd; # Input placed and routed ncd | |
167 | +<inputdir><design>.pcf; # Physical constraints file | |
168 | +END Program post_par_trce | |
169 | + | |
170 | + | |
171 | Index: Insight/XC2V1K_Microblaze/hardware/etc/fast_runtime.opt | |
172 | =================================================================== | |
173 | RCS file: /var/cvs/uClinux-dist/vendors/Insight/XC2V1K_Microblaze/hardware/etc/fast_runtime.opt,v | |
174 | retrieving revision 1.1.1.1 | |
175 | diff -u -p -r1.1.1.1 fast_runtime.opt | |
176 | --- Insight/XC2V1K_Microblaze/hardware/etc/fast_runtime.opt 23 May 2003 00:47:23 -0000 1.1.1.1 | |
177 | +++ Insight/XC2V1K_Microblaze/hardware/etc/fast_runtime.opt 6 Jan 2007 09:05:58 -0000 | |
178 | @@ -1,81 +1,81 @@ | |
179 | -FLOWTYPE = FPGA;\r | |
180 | -###############################################################\r | |
181 | -## Filename: fast_runtime.opt\r | |
182 | -##\r | |
183 | -## Option File For Xilinx FPGA Implementation Flow for Fast\r | |
184 | -## Runtime.\r | |
185 | -## \r | |
186 | -## Version: 4.1.1\r | |
187 | -## $Header: /cvs/sw/new-wave/vendors/Insight/XC2V1K_Microblaze/hardware/etc/fast_runtime.opt,v 1.1 2003/04/02 04:59:57 gerg Exp $\r | |
188 | -###############################################################\r | |
189 | -#\r | |
190 | -# Options for Translator\r | |
191 | -#\r | |
192 | -# Type "ngdbuild -h" for a detailed list of ngdbuild command line options\r | |
193 | -#\r | |
194 | -Program ngdbuild \r | |
195 | --p <partname>; # Partname to use - picked from xflow commandline\r | |
196 | --nt timestamp; # NGO File generation. Regenerate only when\r | |
197 | - # source netlist is newer than existing \r | |
198 | - # NGO file (default)\r | |
199 | --bm <design>.bmm # Block RAM memory map file\r | |
200 | -<userdesign>; # User design - pick from xflow command line\r | |
201 | --uc <design>.ucf; # ucf constraints\r | |
202 | -<design>.ngd; # Name of NGD file. Filebase same as design filebase\r | |
203 | -End Program ngdbuild\r | |
204 | -\r | |
205 | -#\r | |
206 | -# Options for Mapper\r | |
207 | -#\r | |
208 | -# Type "map -h <arch>" for a detailed list of map command line options\r | |
209 | -#\r | |
210 | -Program map\r | |
211 | --o <design>_map.ncd; # Output Mapped ncd file\r | |
212 | -#-fp <design>.mfp; # Floorplan file\r | |
213 | -<inputdir><design>.ngd; # Input NGD file\r | |
214 | -<inputdir><design>.pcf; # Physical constraints file\r | |
215 | -END Program map\r | |
216 | -\r | |
217 | -#\r | |
218 | -# Options for Post Map Trace\r | |
219 | -#\r | |
220 | -# Type "trce -h" for a detailed list of trce command line options\r | |
221 | -#\r | |
222 | -Program post_map_trce\r | |
223 | --e 3; # Produce error report limited to 3 items per constraint\r | |
224 | -#-o <design>_map.twr; # Output trace report file\r | |
225 | --xml <design>_map.twx; # Output XML version of the timing report\r | |
226 | -#-tsi <design>_map.tsi; # Produce Timing Specification Interaction report\r | |
227 | -<inputdir><design>_map.ncd; # Input mapped ncd\r | |
228 | -<inputdir><design>.pcf; # Physical constraints file\r | |
229 | -END Program post_map_trce\r | |
230 | -\r | |
231 | -#\r | |
232 | -# Options for Place and Route\r | |
233 | -#\r | |
234 | -# Type "par -h" for a detailed list of par command line options\r | |
235 | -#\r | |
236 | -Program par\r | |
237 | --w; # Overwrite existing placed and routed ncd\r | |
238 | --ol 4; # Overall effort level\r | |
239 | --d 0; # Number of delay based cleanup passes\r | |
240 | -<inputdir><design>_map.ncd; # Input mapped NCD file\r | |
241 | -<design>.ncd; # Output placed and routed NCD\r | |
242 | -<inputdir><design>.pcf; # Input physical constraints file\r | |
243 | -END Program par\r | |
244 | -\r | |
245 | -#\r | |
246 | -# Options for Post Par Trace\r | |
247 | -#\r | |
248 | -# Type "trce -h" for a detailed list of trce command line options\r | |
249 | -#\r | |
250 | -Program post_par_trce\r | |
251 | --e 3; # Produce error report limited to 3 items per constraint\r | |
252 | -#-o <design>.twr; # Output trace report file\r | |
253 | --xml <design>.twx; # Output XML version of the timing report\r | |
254 | -#-tsi <design>.tsi; # Produce Timing Specification Interaction report\r | |
255 | -<inputdir><design>.ncd; # Input placed and routed ncd\r | |
256 | -<inputdir><design>.pcf; # Physical constraints file\r | |
257 | -END Program post_par_trce\r | |
258 | -\r | |
259 | -\r | |
260 | +FLOWTYPE = FPGA; | |
261 | +############################################################### | |
262 | +## Filename: fast_runtime.opt | |
263 | +## | |
264 | +## Option File For Xilinx FPGA Implementation Flow for Fast | |
265 | +## Runtime. | |
266 | +## | |
267 | +## Version: 4.1.1 | |
268 | +## $Header: /cvs/sw/new-wave/vendors/Insight/XC2V1K_Microblaze/hardware/etc/fast_runtime.opt,v 1.1 2003/04/02 04:59:57 gerg Exp $ | |
269 | +############################################################### | |
270 | +# | |
271 | +# Options for Translator | |
272 | +# | |
273 | +# Type "ngdbuild -h" for a detailed list of ngdbuild command line options | |
274 | +# | |
275 | +Program ngdbuild | |
276 | +-p <partname>; # Partname to use - picked from xflow commandline | |
277 | +-nt timestamp; # NGO File generation. Regenerate only when | |
278 | + # source netlist is newer than existing | |
279 | + # NGO file (default) | |
280 | +-bm <design>.bmm # Block RAM memory map file | |
281 | +<userdesign>; # User design - pick from xflow command line | |
282 | +-uc <design>.ucf; # ucf constraints | |
283 | +<design>.ngd; # Name of NGD file. Filebase same as design filebase | |
284 | +End Program ngdbuild | |
285 | + | |
286 | +# | |
287 | +# Options for Mapper | |
288 | +# | |
289 | +# Type "map -h <arch>" for a detailed list of map command line options | |
290 | +# | |
291 | +Program map | |
292 | +-o <design>_map.ncd; # Output Mapped ncd file | |
293 | +#-fp <design>.mfp; # Floorplan file | |
294 | +<inputdir><design>.ngd; # Input NGD file | |
295 | +<inputdir><design>.pcf; # Physical constraints file | |
296 | +END Program map | |
297 | + | |
298 | +# | |
299 | +# Options for Post Map Trace | |
300 | +# | |
301 | +# Type "trce -h" for a detailed list of trce command line options | |
302 | +# | |
303 | +Program post_map_trce | |
304 | +-e 3; # Produce error report limited to 3 items per constraint | |
305 | +#-o <design>_map.twr; # Output trace report file | |
306 | +-xml <design>_map.twx; # Output XML version of the timing report | |
307 | +#-tsi <design>_map.tsi; # Produce Timing Specification Interaction report | |
308 | +<inputdir><design>_map.ncd; # Input mapped ncd | |
309 | +<inputdir><design>.pcf; # Physical constraints file | |
310 | +END Program post_map_trce | |
311 | + | |
312 | +# | |
313 | +# Options for Place and Route | |
314 | +# | |
315 | +# Type "par -h" for a detailed list of par command line options | |
316 | +# | |
317 | +Program par | |
318 | +-w; # Overwrite existing placed and routed ncd | |
319 | +-ol 4; # Overall effort level | |
320 | +-d 0; # Number of delay based cleanup passes | |
321 | +<inputdir><design>_map.ncd; # Input mapped NCD file | |
322 | +<design>.ncd; # Output placed and routed NCD | |
323 | +<inputdir><design>.pcf; # Input physical constraints file | |
324 | +END Program par | |
325 | + | |
326 | +# | |
327 | +# Options for Post Par Trace | |
328 | +# | |
329 | +# Type "trce -h" for a detailed list of trce command line options | |
330 | +# | |
331 | +Program post_par_trce | |
332 | +-e 3; # Produce error report limited to 3 items per constraint | |
333 | +#-o <design>.twr; # Output trace report file | |
334 | +-xml <design>.twx; # Output XML version of the timing report | |
335 | +#-tsi <design>.tsi; # Produce Timing Specification Interaction report | |
336 | +<inputdir><design>.ncd; # Input placed and routed ncd | |
337 | +<inputdir><design>.pcf; # Physical constraints file | |
338 | +END Program post_par_trce | |
339 | + | |
340 | + |