Add 'make dist' target to get a tarball to test in addition to the upload target.
[sysvinit.git] / obsolete / powerd.cfg
CommitLineData
a74aeac6
PR
1# Example configuration for power daemon.
2# NOTE: this is not implemented yet, just a design.
3#
4# @(#) powerd.cfg 1.01 01-Oct-1994 MvS
5#
6
7# This is the setup section. It sets up the default line
8# signals that your UPS likes to see.
9[ setup ]
10dtr = 1
11rts = 1
12baud = 2400
13send "AAAA"
14
15# Now: how to tell UPS to turn off the power.
16[ powerdown ]
17dtr = 0
18send "BYE"
19
20# How to monitor the UPS, or a remote UPS.
21# Possible line signals: dcd cts dsr ring
22#
23# Comment out the parts you don't want.
24#
25# All of this (1, 2, 3) can be combined.
26[ monitor ]
27
28# First, do we want to broadcast the UPS status
29# on ethernet when something happens?
30# Comment out to disable.
31# Syntax: address, portnumber
32# address: broadcast adress on ethernet
33# portnumber: unused priviliged port (under 1024)
34broadcast = 10.0.33.255,15
35
36# monitor type 1. This tells powerd to monitor line signals.
37ok = dcd
38fail = !dcd
39lowbat = rts
40
41# Monitor type 2. Tell powerd to look for data.
42ok = "OK"
43fail = "!"
44
45# Monitor type 3. Listen to the ethernet.
46#
47# Warn_host is the hostname of the system with the UPS
48# This is for security, so that someone on a DOS box
49# can't spoof the powerd broadcast. The number after it
50# is the portnumber to listen to (see above: broadcast).
51#
52# Note: if the broadcast address set above is enabled
53# and we receive a message from a remote powerd, we check
54# the received broadcast address. If this is the same
55# as from the broadcast we just received,
56# it will not be repeated (guess why).
57remote = warn_host,15
58