1 sysvinit (2.89) UNRELEASED; urgency=low
4 * Do not forget room for last NULL of new environment (was
6 * Handle deleted binaries in pidof (was local bug #34992)
7 * Allow init to delete extra environment variables (was local bug
9 * Avoid that init double environment variables for its childs
10 (was local bug #35855)
11 * Remove man-db tag for encoding for canonical man
12 * Sulogin: try to detect the real device(s) used for the system console
13 /dev/console if but only if /dev/console is used. On Linux this can
14 be more than one device, e.g. a serial line as well as a virtual
15 console as well as a simple printer.
16 * Fix counting message lines in wall. Patch from Petr Lautrbach.
17 * Fix bad printf conversion specifier in wall. Patch from Sébastien Luttringer.
18 * Add patches from Openwall project. Thanks goes to Solar Designer.
19 * Add code to detect the system consoles with the help of the
20 new /proc/consoles files of linux kernel 2.6.38+
21 * Try to make utmpdump IPv6 valid, change based on suggestion from
22 Navdeep Bhatia (see local bug #32429)
23 * Fix signal and alarm handling based on the patch from Florent Viard.
24 (was local bug #32304)
25 * Add fix for Redhat bug #573346: last incorrectly displays IPv6
26 addresses (was local bug #29497)
27 * Correct fix for Debian bug #547073: use IUTF8 flag if defined
28 and if already set to make sure the utf-8 flag is not cleared
29 from the tty. Patch from Samuel Thibault.
30 * Include limits.h in killall.c to enforce definition of PATH_MAX
31 * Fix sysvinit bug #29758 Linker invocation should not contain
32 headers. Change based on patch from Elias Pipping.
33 * Add fix for Debian bug #580272: use return value 1 of
34 is_selinux_enabled() to determine if SELinux is enabled,
35 otherwise initialize SELinux and load the policy. Patch from
37 * Make quotes visible in example of the manual page of fstab-decode
38 * Sulogin: enforce reconnection of stdin/stdout/stderr if a device
40 * Sulogin: if zero is read at reading the passwd guess it's done.
41 * Sulogin: respect byte order that is do not mix chars and ints
42 * Shutdown: use PATH_DEFAULT as suggested by Paul Arthur in local bug #36101
43 * Killall5/pidof: handle strange names of executables (local bug #36252)
44 * Sulogin: be aware the crypt(3) may fail (local bug #36313)
46 [ Petter Reinholdtsen ]
47 * Next release will be 2.89dsf.
48 * Add #ifdef in bootlogd.c to avoid gcc warnings about unused
49 variable on non-linux platforms.
50 * Only set the VSWTC field for termios in init if it is available,
51 to get the source building on FreeBSD.
52 * Add some code to be able to detect programs even as user with
54 * Improve message printed when signaling processes to stop.
55 Patch from Matias A. Fonzo at the dragora project.
56 * Rename internal functions warn() and shutdown() in the shutdown
57 binary to avoid surprising dynamic library name resolution
58 conflict with NSS modules. Patch from Richard Tollerton.
59 * Try harder to find libcrypt.*, even if there is no static library
60 available. Also look in /usr/lib/*/ for the library, to handle
61 Debian multiarch systems. Based on patch from Andrew Gregory.
62 * Adjust included headers to be compatible with the musl C
63 library. Patch from Matias A. Fonzo and Dragora.
64 * Move dovoid() macro from #ifdef__GLIBC__ to #ifdef __linux__,
65 to match the condutions of the place where it is used. Thanks
66 to Matias A. Fonzo for noticing.
67 * Define _XOPEN_SOURCE when building to get crypt() from <unistd.h>
68 instead of using <crypt.h> in sulogin.c, to get the source building
69 with the musl C library.
70 * Use sysconf(_SC_SYMLOOP_MAX) instead of MAXSYMLINKS. If sysconf
71 returns an error, fall back to MAXSYMLINKS on platforms that
72 define it. Fixes build on Hurd. Patch from Justus Winter and
74 * Adjust makefile to make it easier to link all binaries statically.
75 Patch from Matias A. Fonzo and Dragora.
76 * Rewrite findtty() in bootlogd.c to not chance working directory, to
77 reduce the amount of failure that can happin in that function.
78 * Adapt bootlogd TIOCCONS call to kfreebsd. Patch from Mats Erik
80 * Document length limit for the process field in the inittab. Patch
81 from Johannes Truschnigg and Debian.
82 * Fix typo in fstab-decode(8) font escape. Patch from Bjarni Ingi
84 * Port ifdown.c to FreeBSD. Patch from Guillem Jover and Debian.
85 * Drop dsf part from version number. It no longer make sense to keep.
86 * Remove obsolete/ directory from tarball. None of it have been useful
88 * Make it possible to specify the initctl path as a compile time
90 * Use narrowly scoped file descriptor for handling opened TTY in
91 spawn(). Patch from Michał Kulling.
93 -- Petter Reinholdtsen <pere@hungry.com> Sun Apr 11 11:28:55 CEST 2010
95 sysvinit (2.88dsf) world; urgency=low
97 [ Petter Reinholdtsen ]
98 * Mention new home on Savannah in README.
99 * Revert change from Fedora/RedHat where the now obsolete command
100 INIT_CMD_CHANGECONS was introduced. Based on feedback and patch
101 from Bill Nottingham.
102 * Adjust makefile to make sure the install directories are created
103 before files are copied into them.
104 * Simplify build rules, based on patch from Mike Frysinger and Gentoo.
105 * Fix minor bug in optimizing of argument parsing. Based on
106 report from jakemus on freshmeat.
107 * Add casts to get rid of compiler warning about signed/unsigned issues.
108 * Change tty handling in init to make sure the UTF-8 flag is not cleared
109 on boot. Patch from Samuel Thibault.
110 * Add Makefile in toplevel directory.
111 * Print usage information when shutdown is used by non-root user.
112 Patch from Mike Frysinger and Gentoo.
113 * Sync shutdown manual page and usage information. Patch from Mike
114 Frysinger and Gentoo.
115 * Fix race condition in utmp writing. Patch from Gil Kloepfer via
116 Mike Frysinger and Gentoo.
117 * Rewrite findtty() in bootlogd to recursively search /dev/ for the
118 correct device, to handle terminal devices for example in /dev/pty/.
120 * Make sure bootlogd findpty() returns an error value when it fails to
121 find a usable pty. Patch from Rob Leslie via Debian.
122 * Make sure bootlogd fflush() every line, even if asked not to flush
123 to disk using fdatasync(). Patch from Scott Gifford via Debian.
124 * Add compatibility code to handle old path "/etc/powerstatus" for a
126 * Incude definition for MNT_DETACH which is missing in older GNU libc
128 * Do not strip binaries before installing them, to make it easier to
129 get binaries with debug information installed.
132 * Add the comment from Andrea Arcangeli about the correct
133 place of setting the default childhandler within spawn().
134 * Make sure that newline is printed out for last(1) even
135 if an utmp record entry is truncated.
136 * Check if utmp not only exists but also is writable and delay
137 writing out of the utmp runlevel record if utmp is not writable.
138 * Be able to find libcrypt also on 64 bit based architectures.
139 * Add option -w to the last command to display the full user and
140 domain names in the output. Patch from Petr Lautrbach.
141 * Add a manual page for utmpdump as this tool is sometimes
142 very useful even if not intended for normal use.
143 * Use paths.h macros for wall
144 * Change path "/etc/powerstatus" to "/var/run/powerstatus"
145 * Detected also removable block devices at halt/reboot to be able
146 to flush data and send them the ATA standby command. This should
147 avoid data loss on USB sticks and other removable block devices.
148 * Flush block devices on halt/reboot if not done by the kernel.
149 * Set SHELL to /bin/sh in the environmant of shutdown.
150 * Retry to write out shutdown messages if interrupted.
151 * pidof/killall5 - make omit pid list a dynamic one.
152 * pidof - provide '-n' to skip stat(2) syscall on network based FS.
153 * init - avoid compiler warnings
154 * init - initialize console by using the macros from ttydefaults.h
155 * init - add the possiblity to ignore further interrupts from keyboard
156 * init - add the possiblity to set sane terminal line settings
157 * sulogin - add the possibility to reset the terminal io
158 * Fix some minor problems
159 * init - enable is_selinux_enabled() to detect selinuxfs
160 * Add fix for Debian bug #536574 -- Can be enabled by -DACCTON_OFF
161 * Add helper program fstab-decode to make it easier to handle
162 /etc/mtab content. Patch by Miloslav Trmac and Fedora.
163 * Add fix for Debian bug #335023 - Make sure TERM is set on FreeBSD.
164 * Add fix for Debian bug #374038 - Make it clear that shutdown -c can
165 only cancel a waiting shutdown, not an active one.
166 * Add note to pidof manual page about the use of readlink(2). Patch by
167 Bill Nottingham and Fedora.
168 * Add PAM patch contrib/notify-pam-dead.patch based on Debian bug
169 #68621, which will add PAM support for programs spawned by init on
170 the console like sulogin. Based on patch by Topi Miettinen. This
171 patch is not applied by default yet while we review its
172 usefullness. It is only helpful for session handling, as sulogin
173 do not use and will not use a PAM conv() function. The current
174 sulogin is able to handle DES as well as MD5, SHA, and Blowfish
175 encrypted passwords due using getpwnam(3).
176 * Move utmp/wtmp before the execvp() in spawn() to be sure to
177 use the correct pid even on a controlling tty
178 * Remaining problem is that the pid of the second fork() for
179 getting a controlling tty isn't that reported by spawn()
180 * Re-enable writting utmp/wtmp for boot scripts
181 * Extend sulogin to support additional encryption algorithms
182 * Re-enable maintenance message of sulogin
183 * Enable the sulogin fallback password check to handle MD5, SHA, and
184 Blowfish encrypted passwords in case of getpwnam(3) fails.
185 * sulogin picking the SELinux context was broken. Patch by Daniel Walsh
187 -- Petter Reinholdtsen <pere@hungry.com> Sun Apr 11 11:28:55 CEST 2010
189 sysvinit (2.87dsf) world; urgency=low
191 * Fix typos and do minor updates in the manual pages.
192 * Correct section of mountpoint(1).
193 * Document -e and -t options for telinit in init(8).
194 * Update address of FSF in the COPYRIGHT file.
195 * Document in halt(8) that -n might not disable all syncing.
196 Patch by Bill Nottingham and Fedora
197 * Adjust output from "last -x". In reboot lines, print endpoint
198 of uptime too. In shutdown lines print downtimes rather than
199 the time between downs. Fix typo in string compare in last.c.
200 Patch by Thomas Hood.
201 * Improve handling of IPv6 addresses in last. Patch from Fedora.
202 * Document last options in usage information, previously only
203 mentioned in the manual page.
204 * Add new option -F to last, to output full date string instead
205 of the short form provided by default. Patch from Olaf Dabrunz
207 * Adjust build rules to make sure the installed binaries
209 * Increase the compiler warning level when building.
210 * Fix utmp/wtmp updating on 64-bit platforms. Patch by Bill
211 Nottingham and Fedora.
212 * Avoid unchecked return value from malloc() in utmpdump.
213 Patch from Christian 'Dr. Disk' Hechelmann and Fedora.
214 * Make sure to use execle and no execl when passing environment to
215 the new process. Patch from RedHat.
216 * Correct init to make sure the waiting status is preserved across
217 re-exec. Patch from RedHat.
218 * Correct init to avoid race condition when starting programs during
219 boot. Patch from SuSe.
220 * Allow 'telinit u' in runlevels 0 and 6. Patch from Thomas Hood.
221 * Change install rules to make pidof an absolute symlink. Patch from
223 * Improve error message from init if fork() fail. Patch found in Suse.
224 * Add support for SE Linux capability handling. Patch from Manoj
225 Srivastava, adjusted to avoid aborting if SE policy was loaded in
226 the initrd with patch from Bill Nottingham and Fedora.
227 * Add -c option to pidof for only matching processes with the same
228 process root. Ignore -c when not running as root. Patch from
229 Thomas Woerner and Fedora.
230 * Adjust init to terminate argv0 with one 0 rather than two so that
231 process name can be one character longer. Patch by Kir Kolyshkin.
232 * Make sure bootlogd exit with non-error exit code when forking of
233 the child successfully.
234 * Add bootlogd option -s to make it possible to control the use of
235 fdatasync(). Patch from Thomas Hood.
236 * Add bootlogd option -c to tell it to create the log file if it does
237 not exist. Patch from Thomas Hood.
238 * Let bootlogd also look at ttyB* devices to work on HPPA. Patch
240 * Change init to use setenv() instead of putenv, make sure the PATH
241 value is usable on re-exec. Patch from Thomas Hood.
242 * Add usleep in killall5 after killing processes, to force the kernel
243 to reschedule. Patch from SuSe.
244 * Modify pidof to not print empty line if no pid was found.
245 * Modify init and sulogin to fix emergency mode's tty, making sure ^C
246 and ^Z work when booting with 'emergency' kernel option. Patch from
248 * Modify init to allow some time for failed opens to resolve themselves.
249 Patch from Bill Nottingham and Fedora.
250 * Modify init to shut down IDE, SCSI and SATA disks properly. Patches
251 from Sebastian Reichelt, Werner Fink and SuSe.
252 * Modify wall to use UT_LINESIZE from <utmp.h> instead of hardcoded
253 string lengths. Patch from SuSe.
254 * Change wall to make halt include hostname in output.
255 * Change killall to avoid killing init by mistake. Patch from SuSe.
256 * Change killall5 to use the exit value to report if it found any
257 processes to kill. Patch from Debian.
258 * Add option -o opmitpid to killall5, to make it possible to skip
259 some pids during shutdown. Based on patch from Colin Watson and
261 * Add references between killall5 and pidof manual pages. Patch from Debian.
262 * Modify killall to work better with user space file system, by
263 changing cwd to /proc when stopping and killing processes, and
264 avoiding stat() when the value isn't used. Also, lock process
265 pages in memory to avoid paging when user processes are stopped.
266 Patch from Debian and Goswin von Brederlow with changes by Kel
268 * Change shutdown to only accept flags -H and -P with the -h flag,
269 and document this requirement in the manual page.
270 * Change reboot/halt to work properly when used as a login shell.
271 Patch by Dale R. Worley and Fedora.
272 * Let sulogin fall back to the staticly linked /bin/sash if both roots
273 shell and /bin/sh fail to execute.
275 -- Petter Reinholdtsen <pere@hungry.com> Sun, 12 Jul 2009 19:58:10 +0200
277 sysvinit (2.86) cistron; urgency=low
279 * Fixed up bootlogd to read /proc/cmdline. Also keep an internal
280 linebuffer to process \r, \t and ^H. It is becoming useable.
281 * Applied trivial OWL patches
282 * Block signals in syslog(), since syslog() is not re-entrant
283 (James Olin Oden <joden@malachi.lee.k12.nc.us>, redhat bug #97534)
284 * Minor adjustements so that sysvinit compiles on the Hurd
285 * killall5 now skips kernel threads
286 * Inittab entries with both 'S' and other runlevels were broken.
287 Fix by Bryan Kadzban <bryan@kadzban.is-a-geek.net>
288 * Changed initreq.h to be more flexible and forwards-compatible.
289 * You can now through /dev/initctl set environment variables in
290 init that will be inherited by its children. For now, only
291 variables prefixed with INIT_ can be set and the maximum is
292 16 variables. There's also a length limit due to the size
293 of struct init_request, so it should be safe from abuse.
294 * Option -P and -H to shutdown set INIT_HALT=POWERDOWN and
295 INIT_HALT=HALT as environment variables as described above
296 * Add "mountpoint" utility.
297 * Slightly better algorithm in killall5.c:pidof()
298 * Added some patches from fedora-core (halt-usage, last -t,
299 sulogin-message, user-console)
301 -- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 30 Jul 2004 14:14:58 +0200
303 sysvinit (2.85) cistron; urgency=low
305 * Add IPv6 support in last(1)
306 * Sulogin: even if the root password is empty, ask for a password-
307 otherwise there is no way to set a timeout.
308 * Removed support for ioctl.save.
309 * Turned of support for /etc/initrunlvl and /var/run/initrunlvl
310 * Fixed warts in dowall.c ("Dmitry V. Levin" <ldv@altlinux.org>)
311 * Fix init.c::spawn(). The "f" variable was used both as file descriptor
312 and waitpid(2) return code. In certain circumstances, this leads to
313 TIOCSCTTY with wrong file descriptor (Vladimir N. Oleynik).
314 * Fix fd leak in sulogin (Dmitry V. Levin).
315 * More error checking in all wait() calling code (Dmitry V. Levin).
316 * Fix argv[] initialization in spawn() (Dmitry V. Levin).
317 * Change strncpy to strncat in most places (Dmitry V. Levin).
319 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 15 Apr 2003 16:37:57 +0200
321 sysvinit (2.84) cistron; urgency=low
323 * Don't use /etc/initlvl interface for telinit; only use /dev/initctl,
324 and give a clear error when that fails.
325 * Add -i/--init command line flag to init - this tells init
326 'behave as system init even if you're not PID#1'. Useful for
327 testing in chroot/jail type environments.
329 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 27 Nov 2001 13:10:08 +0100
331 sysvinit (2.83) cistron; urgency=low
333 * Fix bug in shutdown where it didn't check correctly for a
334 virtual console when checking /etc/shutdown.allow
335 * Fix race condition in waitpid() [Andrea Arcangeli]
336 * Call closelog() after openlog()/syslog() since recent libc's
337 keep the logging fd open and that is fd#0 aka stdin.
339 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 2 Oct 2001 23:27:06 +0200
341 sysvinit (2.82) cistron; urgency=low
343 * Print out correct version number at startup.
344 * Fix spelling of initttab in init(8)
346 -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 23 Aug 2001 17:50:44 +0200
348 sysvinit (2.81) cistron; urgency=low
350 * Fix typo/bug in killall5/pidof, -o option failed to work since 2.79.
351 Reformatted source code to prevent this from happening again.
352 * shutdown.8: applied redhat manpage update
353 * sulogin: applied redhat sysvinit-2.78-sulogin-nologin.patch
354 * sulogin: applied redhat sysvinit-2.78-notty.patch
355 * sulogin: applied redhat sysvinit-2.78-sigint.patch
357 sysvinit (2.80) cistron; urgency=low
359 * Grammar/spelling fixes in shutdown.c (Christian Steinrueck)
360 * Don't set controlling tty for non-(sysinit,boot,single) runlevels
362 -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 26 Jul 2001 13:26:56 +0200
364 sysvinit (2.79) cistron; urgency=low
366 * New upstream version
367 * several fixes to wall by Tim Robbins <fyre@box3n.gumbynet.org>
368 * Several extra boundary checks by Solar Designer
369 * Make /dev/console controlling tty
370 * Stricter checks on ownership of tty by mesg(1)
371 * Documented and restricted -n option to wall(1)
372 * Make it compile with glibc 2.2.2
373 * Document IO redirection in wall manpage (closes: #79491)
374 * Update README (closes: #85650)
375 * Fix init.8 manpage (closes: #75268)
376 * Fix typo in halt(8) manpage (closes: #67875)
377 * Check time argument of shutdown(8) for correctness (closes: #67825)
378 * Check for stale sessions in last(1) (Chris Wolf <cwolf@starclass.com>)
380 -- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 4 Jul 2001 15:04:36 +0200
382 sysvinit (2.78-2) frozen unstable; urgency=high
384 * Change "booting" to "reloading" message at reload
385 * Add "-z xxx" dummy command line argument (closes: #54717)
387 -- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 11 Feb 2000 12:17:54 +0100
389 sysvinit (2.78-1) unstable; urgency=low
391 * 2.78 will be the new upstream version, I'm skipping 2.77
392 * Shutdown now calls sync before switching the runlevel to 0 or 6,
393 or before unmounting filesystems if -n was used (closes: #46461)
394 * Some cosmetic changes to init.c (closes: #32079)
396 -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 30 Dec 1999 20:40:23 +0100
398 sysvinit (2.77-2) unstable; urgency=low
402 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 5 Oct 1999 21:51:50 +0200
404 sysvinit (2.77-1) unstable; urgency=low
406 * Write reboot record into utmp file as well to make rms happy
407 * Fork and dump core in / if SIGSEGV is received for debugging purposes
408 * Patch by Craig Sanders <cas@vicnet.net.au> for "last" -i option
410 -- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 4 Aug 1999 11:16:23 +0200
412 sysvinit (2.76-4) unstable; urgency=low
414 * Change dowall.c to handle Unix98 ptys correctly
415 * Add comment in rcS about usage of setup.sh and unconfigured.sh
416 * Shutdown now removes nologin file just before calling telinit
417 * SEGV handler now tries to continue after sleep of 30 seconds.
418 On a 386-class processor it also prints out the value of EIP.
419 * Fix for racecondition in check_init_fifo() by Richard Gooch
421 -- Miquel van Smoorenburg <miquels@cistron.nl> Sat, 8 May 1999 17:22:57 +0200
423 sysvinit (2.76-3) frozen unstable; urgency=high
425 * Small bugfix to last.c courtesy of Danek Duvall <duvall@emufarm.ml.org>
427 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 12 Jan 1999 12:12:44 +0100
429 sysvinit (2.76-1) frozen unstable; urgency=high
431 * Fix bug in check_pipe() which crashes init on the Alpha.
433 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 3 Nov 1998 11:09:13 +0100
435 sysvinit (2.75-4) unstable; urgency=low
437 * Change sulogin password buffer to 128 characters.
438 * Don't print control characters in dowall.c
439 * Try to open getenv ("CONSOLE"), /dev/console and /dev/tty0 in order.
440 For backwards compatibility when you try to boot a 2.0.x kernel
441 with a linux > 2.1.70 /dev/console device.
442 * Change src/Makefile for non-debian systems (mainly, RedHat)
443 * Try to create /dev/initctl if not present; check every time to see
444 if the dev/ino of /dev/initctl has changed and re-open it. This should
446 * Send SIGUSR1 to init at bootup to let it re-open /dev/initctl;
447 again in support of devfs.
448 * Moved pidof to /bin (it's only a link to killall5 anyway)
450 -- Miquel van Smoorenburg <miquels@cistron.nl> Mon, 5 Oct 1998 14:03:14 +0200
452 sysvinit (2.75-2) frozen unstable; urgency=medium
455 * Add check to see if /dev/initctl is really a FIFO
456 * In ifdown.c first down all shaper devices then the real devices
458 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 2 Jun 1998 22:43:01 +0200
460 sysvinit (2.75-1) frozen unstable; urgency=low
462 * Rewrote last.c to be much more memory friendly and correct,
463 thanks to Nick Andrew <nick@zeta.org.au> and
464 David Parrish <dparrish@zeta.org.au>
466 #21616: sysvinit: sulogin thinks md5 root password is bad
467 #21765: sysvinit: Typo in `killall5.c'
468 #21775: sysvinit: sysvinit does not support MD5 hashed passwords
469 #21990: /usr/bin/last: unnecessary memset and off-by-one bug
470 #22084: sysvinit 2.74-4: SIGPWR missing on sparc
471 #21900: init, powerfail events, and shutdown.allow
472 #21702: init 0 does not work as expected...
473 #21728: sysvinit: Typo in `init.c'
474 #22363: sysvinit: discrepance btw. manpage and /sbin/init
476 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 19 May 1998 11:02:29 +0200
478 sysvinit (2.74-4) frozen unstable; urgency=medium
480 * Add -o option to last to process libc5 utmp files.
481 * Buffer overflow fixed in init.c (not very serious; only exploitable
482 by root). Thanks to Chris Evans <chris@ferret.lmh.ox.ac.uk>
484 -- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 15 Apr 1998 17:04:33 +0200
486 sysvinit (2.74-1) unstable; urgency=low
488 * Should compile with glibc 1.99 :)
489 * Change behaviour of reboot(1) and halt(1) so that the default when
490 the runlevel can't be determined is to call shutdown.
491 * Added re-exec patch from Al Viro (21 Feb 1998):
492 'U' flag added to telinit. It forces init to re-exec itself
493 (passing its state through exec, certainly).
494 May be useful for smoother (heh) upgrades.
496 did_boot made global and added to state - thanks, Miquel.
497 Yet another file descriptors leak - close state pipe if
500 -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 12 Mar 1998 17:42:46 +0100
502 sysvinit (2.73-2) unstable; urgency=low
504 * Change _NSIG to NSIG for 2.1.x kernel includes.
506 -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 8 Jan 1998 16:01:02 +0100
508 sysvinit (2.73-1) unstable; urgency=low
510 * Use siginterrupt, now that system calls are restarted by default.
511 Main symptom was that the sulogin timeout didn't work but there
512 might have been more hidden problems.
513 * Kill process immidiately if turned off in inittab
514 * Fixed sulogin check on tty arg.
515 * Use strerror() instead of sys_errlist
516 * wall now supports a '-n' option to suppress [most of] the banner.
517 Debian doesn't use sysvinit's wall, but apparently Redhat does.
518 * Add '-F' (forcefsck) option to shutdown
519 * Close and reopen /dev/initctl on SIGUSR1 (mainly for a /dev in ram)
521 -- Miquel van Smoorenburg <miquels@cistron.nl> Sat, 3 Jan 1998 16:32:39 +0100
523 sysvinit (2.72-3) unstable; urgency=low
525 * Add extra fork() in dowall.c to avoid hanging in rare cases
527 -- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 22 Oct 1997 14:44:00 +0200
529 sysvinit (2.72) unstable; urgency=low
531 * Applied manual page patches by Bill Hawes <whawes@star.net>. Thanks Bill!
532 * Applied patches to the sample Slackware scripts by
533 "Jonathan I. Kamens" <jik@kamens.brookline.ma.us>
534 * Fix halt and reboot runlevels 0 & 6 check.
535 * Only say "no more processes left in runlevel x" once
536 * Fix race condition with SIGCHLD in spawn()
537 (thanks to Alon Ziv <alonz@CS.Technion.AC.IL>)
538 * Compress all manpages (missed 2)
540 * Added poweroff patch by Roderich Schupp <rsch@ExperTeam.de>
542 -- Miquel van Smoorenburg <miquels@cistron.nl> Sun, 12 Oct 1997 17:20:17 +0200
544 sysvinit (2.71-2) frozen unstable; urgency=low
546 * Print 2.71 instead of 2.70 on startup :)
548 -- Miquel van Smoorenburg <miquels@cistron.nl> Mon, 5 May 1997 12:45:25 +0200
550 sysvinit (2.71-1) frozen unstable; urgency=high
552 * Added code for updwtmp() in utmp.c for glibc (2.0.3)
553 * Fixed all programs to use functions from utmp.c and getutent()
554 * Do not try to clean up utmp in init itself (Bug#9022)
555 * Removed sync() from main loop.
556 * Hopefully fixes bug #8657 (shutdown signal handling)
558 -- Miquel van Smoorenburg <miquels@cistron.nl> Sat, 26 Apr 1997 19:57:27 +0200
560 sysvinit (2.70-1) unstable; urgency=low
563 * Removed StUdLy CaPs from source code
564 * Moved files in source archive around
565 * Fixes for glibc (utmp handling, signal handling).
566 * Fixed '-d' option to last (now also works without '-a').
567 * Added extra checking in last.c to prevent showing dead entries
569 -- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 7 Feb 1997 15:31:30 +0100
571 sysvinit (2.69-1) frozen unstable; urgency=medium
573 * Fixed bug that can throw X in a loop (or any other app that reads from
576 -- Miquel van Smoorenburg <miquels@cistron.nl> Sun, 1 Dec 1996 15:32:24 +0100
578 sysvinit (2.67-1) frozen unstable; urgency=high
580 * Fixes problem with /dev/console being controlling terminal of some
582 * Puts copyright file in the right place
584 -- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 15 Nov 1996 12:23:33 +0100
586 sysvinit (2.66-1) unstable; urgency=medium
588 * Skipped 2.65. A development 2.65 got out by accident and is apparently
590 * Also compiles and runs with GNU libc (and on the Alpha)
591 * Fixed dowall.c not to exit when getpwuid() fails and uid == 0.
592 * Fixed init panic'ing on empty lines in /etc/inittab
593 * Changed default PATH to include /usr/local/sbin
594 * Set /dev/console as controlling terminal for sysinit,bootwait,wait,powerwait
595 This allows using ^C to interrupt some parts of eg the boot process.
596 * Remove old symlink in /var/log/initlvl; let init check both
597 /var/log and /etc itself.
599 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 29 Oct 1996 13:46:54 +0100
602 - Skipped 2.65. A development 2.65 got out by accident and is apparently
604 - Fixed dowall.c not to exit when getpwuid() fails and uid == 0.
605 - Fixed init panic'ing on empty lines in /etc/inittab
606 - Changed default PATH to include /usr/local/sbin
607 - Ported to Linux/Alpha and GNU libc.
608 - Set /dev/console as controlling terminal for sysinit,bootwait,wait,powerwait.
609 This allows using ^C to interrupt some parts of eg the boot process.
610 - Remove old symlink in /var/log/initlvl; let init check both
611 /var/log and /etc itself.
614 - Init checks CONSOLE environment variable on startup (overrides /dev/console)
615 - Init sets CONSOLE variable for all its children.
616 - Wtmp(): when zeroing out old utmp entries, keep ut_id field
617 - Wtmp(): try to re-use ut_id field if possible.
618 - SetTerm(): only read from /etc/ioctl.save if written once.
619 - Included start-stop-daemon, C version (source only).
620 - Fixed wait() for the emergency shell.
621 - killall5: ignore signal before doing kill(-1, pid).
624 - Fixed preinst script for Debian
625 - Fixed init.c to become init daemon if name is init.new
626 - Fixed pidof to not return PIDs of shell scripts
629 - Changed debian /etc/init.d/boot script to create a nologin file
630 at boot and to remove it just before going multiuser.
633 - Decided to release a 2.62 version with a BIG WARNING about upgrading
634 init in it. Will send a patch to Linus for the linux/Documentation/Changes
635 file so that 2.62 or later is mentioned as the version to upgrade to.
636 - Added docs for Slackware
639 - Fixed debian/etc/init.d/network for the lo device.
640 - Added "-xdev" to the cd /tmp && find in debian/etc/init.d/boot
641 - Made remove time for files in /tmp configurable.
644 - Changed /etc/init.d/boot script again
645 - Fixed problem in init.c with trailing whitespace after entries in inittab
646 - Fixed killall5 problems
647 - Added manpage for lastb
648 - Added SHELL= environment variable to sulogin
649 - Fixed sulogin & shadow problems
650 - Added timeout option to sulogin
653 - Fixed sulogin (didn't work if root wasn't first entry in shadow file)
654 - Fixed mesg for systems with "tty" group (such as Debian)
655 - Fixed nsyslog() in killall5.c
658 - Fixed race condition in init.c, resulting in hanging shutdowns.
659 Courtesy of Max Neunhoeffer <Max.Neunhoeffer@urz.uni-heidelberg.de>.
660 - Fixed debian/etc/init.d/boot for swapon and mdadd
661 - Added architecture to debian.control
662 - Added manpages for rc.boot and rc.local
663 - Updated inittab manpage for 4-character runlevel field
664 - Added debian replaces for bsdutils < version_without_mesg
665 - Fixed init.c so that it also works with kernels 1.3.81 and up
668 - Init logs less to syslog (suspected to hang in syslog() or openlog() )
669 - removed closelog() from init.c
670 - removed time check of runlevel record in halt.
671 - Added options to last to get hostname from ut_addr field
672 - Added last and mesg to installation targets
673 - rewrote /etc/init.d/boot a bit.
676 - Changed etc/init.d/rc to do a stty onlcr
677 - Added /var/log/initrunlvl symlink
680 - Added the latest debian files.
681 - Added support for 4-character id fields (if you have libc5).
682 - Fixed pidof (in killall5) parsing of /proc/.../stat
683 - Save restore GMT setting in /etc/init.d/boot
687 - Added "-b" flag to init, gives a shell before
688 anything else (in case the startup scripts are screwed)
689 - Moved fastboot to /fastboot
690 - Folded in Debian patches.
691 - Removed old scripts
692 - Added debian /etc/directory.
695 - Changed over to init_request (with initreq.h)
696 - Processes no longer killed when "process" field
697 changes, change takes effect after next respawn.
700 - Bugfix release for Debian and Slackware 3.0
703 - Fixed race condition init init.c wrt got_chld
704 - Fixed one-off for malloc in killall5.c
706 - Console code: no relink to /dev/systty on CTRL-ALT-DEL)
709 - Changed a few things here and there, didn't
710 really document it :)
713 - Added option to shutdown to run standalone.
716 - Added GNU copyrigh to all *.[ch] files.
717 - added /etc/initscript
718 - reboot and halt now call shutdown in runlevels 1-5
719 - Can run from read-only root (CDROM)
722 - Renamed pidof to killall5, updated all scripts to
723 use killall5 instead of kill -1 ....
724 - Rewrote scripts to use this, and some general changes.
725 - Added SysV command line compatibility to shutdown.
728 - Added `powerfailnow' keyword, for when UPS battery is low.
730 - Fixed utmp handling (wrt. CLEAN_UTMP)
732 * Make last compatible with GNU/BSD (long options?)
734 * remote SIGPWR broadcast? in powerd? (with priv. port)
738 - Ignores unknown command line arguments.
739 - Modelled more after the "real" sysVinit
740 - Lots of changes all over the place.
741 (like showing runlevel in "ps" listing, logging
742 runlevel into utmp file etc)
743 - now using "reliable" signals instead of V7 style.
744 - Updated all scripts. Examples are in two directories:
745 etc (normal) and etc-sysv (sysv style scripts).
746 - runlevel 0 = halt, 1 = single user, 6 = reboot.
747 - added support for serial console.
748 - updated Propaganda, manpages.
749 - added shutdown access control.
752 - Send out the official version into the world as
756 - Changed init to really catch SIGPWR 'cause we
757 hooked up an UPS to the Linux machine. The
758 keyword for catching the TreeFingerSalute is
759 now "ctrlaltdel" instead of "power{wait,fail}".
762 - Fixed last to reckognize BSD style wtmp logging.
763 - Changed init to write wtmp records that are
764 SysV compliant but are also reckognized by the
765 BSD last. Added a '+' option to the 'process'
766 field of inittab, for getties that want to do
767 their own utmp/wtmp housekeeping (kludge!).
768 - Now accepts a runlevel on the command line,
769 and reckognizes the 'auto' argument. (Sets the
770 environment variable AUTOBOOT to YES)
773 - Ripped out the 'leave' action. To difficult, and
775 - Going single user now kills _all_ processes.
776 - Added '-t secs' option to all commands.
777 - This version is stable enough to post.
780 - Made wait()'s asynchronous
781 - Changed whole thing to one big state machine
782 - Now using 'pseudo levels' # & * for SYSINIT & BOOT
783 - Added a new type of 'action', called leave. This
784 process will be executed when the system goes from a
785 runlevel specified in it's runlevel field to a
786 level that's not. Nice to bring down NFS and the like.
789 - Fixed a bug with 'boot' and 'once'.
790 - Check 'initdefault' for validity.
791 - Reckognizes "single" as command line argument.
792 - Retries execvp with 'sh -c exec ..' if command
793 is a shell script. (shouldn't execvp do this?)
794 - Added patches to use syslog if defined.
797 - Rewrote the code totally, so started with a new
799 - Dropped Minix support, this code now is Linux - specific.
800 - With TEST switch on, this init & telinit can
801 run standalone for test purposes.
804 - Got a 386, so installed Linux. Added 'soft' reboot
805 to be default under linux. Fixed some typos.
808 - Bugreport from Michael Haardt ; removed deadlock
809 and added 'waitpid' instead of 'wait' for SYSV.
812 - Read manual wrong: there is no 'action' field called
813 process, but all entries are of type process. Every
814 'process' get exec'ed by /bin/sh -c 'exec command'.
815 - Rapidly respawning processes are caught in the act.
816 - _SYSV support is really Linux support,
817 done by poe@daimi.aau.dk on 25-Mar-92.
820 - Initial version, very primitive for the Minix
821 operating system. Required some mods. to the