2 * Add option -w to the last command to display the full user and
3 domain names in the output. Patch from Petr Lautrbach.
4 * Add a manual page for utmpdump as this tool is sometimes
5 very useful even if not intended for normal use.
6 * Use paths.h macros for wall
7 * Change path "/etc/powerstatus" to "/var/run/powerstatus"
8 * Detected also removable block devices at halt/reboot to be able
9 to flush data and send them the ATA standby command. This should
10 avoid data loss on USB sticks and other removable block devices.
11 * Flush block devices on halt/reboot if not done by the kernel.
12 * Set SHELL to /bin/sh in the environmant of shutdown.
13 * Retry to write out shutdown messages if interrupted.
14 * pidof/killall5 - make omit pid list a dynamic one.
15 * pidof - provide '-n' to skip stat(2) syscall on network based FS.
17 sysvinit (2.88dsf) UNRELEASED; urgency=low
19 [ Petter Reinholdtsen ]
20 * Mention new home on Savannah in README.
21 * Revert change from Fedora/RedHat where the now obsolete command
22 INIT_CMD_CHANGECONS was introduced. Based on feedback and patch
24 * Adjust makefile to make sure the install directories are created
25 before files are copied into them.
26 * Simplify build rules, based on patch from Mike Frysinger and Gentoo.
27 * Fix minor bug in optimizing of argument parsing. Based on
28 report from jakemus on freshmeat.
29 * Add casts to get rid of compiler warning about signed/unsigned issues.
30 * Change tty handling in init to make sure the UTF-8 flag is not cleared
31 on boot. Patch from Samuel Thibault.
32 * Add Makefile in toplevel directory.
33 * Print usage information when shutdown is used by non-root user.
34 Patch from Mike Frysinger and Gentoo.
35 * Sync shutdown manual page and usage information. Patch from Mike
37 * Fix race condition in utmp writing. Patch from Gil Kloepfer via
38 Mike Frysinger and Gentoo.
39 * Rewrite findtty() in bootlogd to recursively search /dev/ for the
40 correct device, to handle terminal devices for example in /dev/pty/.
42 * Make sure bootlogd findpty() returns an error value when it fails to
43 find a usable pty. Patch from Rob Leslie via Debian.
44 * Make sure bootlogd fflush() every line, even if asked not to flush
45 to disk using fdatasync(). Patch from Scott Gifford via Debian.
48 * Add the comment from Andrea Arcangeli about the correct
49 place of setting the default childhandler within spawn().
50 * Make sure that newline is printed out for last(1) even
51 if an utmp record entry is truncated.
52 * Check if utmp not only exists but also is writable and delay
53 writing out of the utmp runlevel record if utmp is not writable.
54 * Be able to find libcrypt also on 64 bit based architectures.
56 -- Petter Reinholdtsen <pere@hungry.com> Sun, 12 Jul 2009 19:58:10 +0200
58 sysvinit (2.87dsf) world; urgency=low
60 * Fix typos and do minor updates in the manual pages.
61 * Correct section of mountpoint(1).
62 * Document -e and -t options for telinit in init(8).
63 * Update address of FSF in the COPYRIGHT file.
64 * Document in halt(8) that -n might not disable all syncing.
65 Patch by Bill Nottingham and Fedora
66 * Adjust output from "last -x". In reboot lines, print endpoint
67 of uptime too. In shutdown lines print downtimes rather than
68 the time between downs. Fix typo in string compare in last.c.
70 * Improve handling of IPv6 addresses in last. Patch from Fedora.
71 * Document last options in usage information, previously only
72 mentioned in the manual page.
73 * Add new option -F to last, to output full date string instead
74 of the short form provided by default. Patch from Olaf Dabrunz
76 * Adjust build rules to make sure the installed binaries
78 * Increase the compiler warning level when building.
79 * Fix utmp/wtmp updating on 64-bit platforms. Patch by Bill
80 Nottingham and Fedora.
81 * Avoid unchecked return value from malloc() in utmpdump.
82 Patch from Christian 'Dr. Disk' Hechelmann and Fedora.
83 * Make sure to use execle and no execl when passing environment to
84 the new process. Patch from RedHat.
85 * Correct init to make sure the waiting status is preserved across
86 re-exec. Patch from RedHat.
87 * Correct init to avoid race condition when starting programs during
88 boot. Patch from SuSe.
89 * Allow 'telinit u' in runlevels 0 and 6. Patch from Thomas Hood.
90 * Change install rules to make pidof an absolute symlink. Patch from
92 * Improve error message from init if fork() fail. Patch found in Suse.
93 * Add support for SE Linux capability handling. Patch from Manoj
94 Srivastava, adjusted to avoid aborting if SE policy was loaded in
95 the initrd with patch from Bill Nottingham and Fedora.
96 * Add -c option to pidof for only matching processes with the same
97 process root. Ignore -c when not running as root. Patch from
98 Thomas Woerner and Fedora.
99 * Adjust init to terminate argv0 with one 0 rather than two so that
100 process name can be one character longer. Patch by Kir Kolyshkin.
101 * Make sure bootlogd exit with non-error exit code when forking of
102 the child successfully.
103 * Add bootlogd option -s to make it possible to control the use of
104 fdatasync(). Patch from Thomas Hood.
105 * Add bootlogd option -c to tell it to create the log file if it does
106 not exist. Patch from Thomas Hood.
107 * Let bootlogd also look at ttyB* devices to work on HPPA. Patch
109 * Change init to use setenv() instead of putenv, make sure the PATH
110 value is usable on re-exec. Patch from Thomas Hood.
111 * Add usleep in killall5 after killing processes, to force the kernel
112 to reschedule. Patch from SuSe.
113 * Modify pidof to not print empty line if no pid was found.
114 * Modify init and sulogin to fix emergency mode's tty, making sure ^C
115 and ^Z work when booting with 'emergency' kernel option. Patch from
117 * Modify init to allow some time for failed opens to resolve themselves.
118 Patch from Bill Nottingham and Fedora.
119 * Modify init to shut down IDE, SCSI and SATA disks properly. Patches
120 from Sebastian Reichelt, Werner Fink and SuSe.
121 * Modify wall to use UT_LINESIZE from <utmp.h> instead of hardcoded
122 string lengths. Patch from SuSe.
123 * Change wall to make halt include hostname in output.
124 * Change killall to avoid killing init by mistake. Patch from SuSe.
125 * Change killall5 to use the exit value to report if it found any
126 processes to kill. Patch from Debian.
127 * Add option -o opmitpid to killall5, to make it possible to skip
128 some pids during shutdown. Based on patch from Colin Watson and
130 * Add references between killall5 and pidof manual pages. Patch from Debian.
131 * Modify killall to work better with user space file system, by
132 changing cwd to /proc when stopping and killing processes, and
133 avoiding stat() when the value isn't used. Also, lock process
134 pages in memory to avoid paging when user processes are stopped.
135 Patch from Debian and Goswin von Brederlow with changes by Kel
137 * Change shutdown to only accept flags -H and -P with the -h flag,
138 and document this requirement in the manual page.
139 * Change reboot/halt to work properly when used as a login shell.
140 Patch by Dale R. Worley and Fedora.
141 * Let sulogin fall back to the staticly linked /bin/sash if both roots
142 shell and /bin/sh fail to execute.
144 -- Petter Reinholdtsen <pere@hungry.com> Sun, 12 Jul 2009 19:58:10 +0200
146 sysvinit (2.86) cistron; urgency=low
148 * Fixed up bootlogd to read /proc/cmdline. Also keep an internal
149 linebuffer to process \r, \t and ^H. It is becoming useable.
150 * Applied trivial OWL patches
151 * Block signals in syslog(), since syslog() is not re-entrant
152 (James Olin Oden <joden@malachi.lee.k12.nc.us>, redhat bug #97534)
153 * Minor adjustements so that sysvinit compiles on the Hurd
154 * killall5 now skips kernel threads
155 * Inittab entries with both 'S' and other runlevels were broken.
156 Fix by Bryan Kadzban <bryan@kadzban.is-a-geek.net>
157 * Changed initreq.h to be more flexible and forwards-compatible.
158 * You can now through /dev/initctl set environment variables in
159 init that will be inherited by its children. For now, only
160 variables prefixed with INIT_ can be set and the maximum is
161 16 variables. There's also a length limit due to the size
162 of struct init_request, so it should be safe from abuse.
163 * Option -P and -H to shutdown set INIT_HALT=POWERDOWN and
164 INIT_HALT=HALT as environment variables as described above
165 * Add "mountpoint" utility.
166 * Slightly better algorithm in killall5.c:pidof()
167 * Added some patches from fedora-core (halt-usage, last -t,
168 sulogin-message, user-console)
170 -- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 30 Jul 2004 14:14:58 +0200
172 sysvinit (2.85) cistron; urgency=low
174 * Add IPv6 support in last(1)
175 * Sulogin: even if the root password is empty, ask for a password-
176 otherwise there is no way to set a timeout.
177 * Removed support for ioctl.save.
178 * Turned of support for /etc/initrunlvl and /var/run/initrunlvl
179 * Fixed warts in dowall.c ("Dmitry V. Levin" <ldv@altlinux.org>)
180 * Fix init.c::spawn(). The "f" variable was used both as file descriptor
181 and waitpid(2) return code. In certain circumstances, this leads to
182 TIOCSCTTY with wrong file descriptor (Vladimir N. Oleynik).
183 * Fix fd leak in sulogin (Dmitry V. Levin).
184 * More error checking in all wait() calling code (Dmitry V. Levin).
185 * Fix argv[] initialization in spawn() (Dmitry V. Levin).
186 * Change strncpy to strncat in most places (Dmitry V. Levin).
188 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 15 Apr 2003 16:37:57 +0200
190 sysvinit (2.84) cistron; urgency=low
192 * Don't use /etc/initlvl interface for telinit; only use /dev/initctl,
193 and give a clear error when that fails.
194 * Add -i/--init command line flag to init - this tells init
195 'behave as system init even if you're not PID#1'. Useful for
196 testing in chroot/jail type environments.
198 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 27 Nov 2001 13:10:08 +0100
200 sysvinit (2.83) cistron; urgency=low
202 * Fix bug in shutdown where it didn't check correctly for a
203 virtual console when checking /etc/shutdown.allow
204 * Fix race condition in waitpid() [Andrea Arcangeli]
205 * Call closelog() after openlog()/syslog() since recent libc's
206 keep the logging fd open and that is fd#0 aka stdin.
208 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 2 Oct 2001 23:27:06 +0200
210 sysvinit (2.82) cistron; urgency=low
212 * Print out correct version number at startup.
213 * Fix spelling of initttab in init(8)
215 -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 23 Aug 2001 17:50:44 +0200
217 sysvinit (2.81) cistron; urgency=low
219 * Fix typo/bug in killall5/pidof, -o option failed to work since 2.79.
220 Reformatted source code to prevent this from happening again.
221 * shutdown.8: applied redhat manpage update
222 * sulogin: applied redhat sysvinit-2.78-sulogin-nologin.patch
223 * sulogin: applied redhat sysvinit-2.78-notty.patch
224 * sulogin: applied redhat sysvinit-2.78-sigint.patch
226 sysvinit (2.80) cistron; urgency=low
228 * Grammar/spelling fixes in shutdown.c (Christian Steinrueck)
229 * Don't set controlling tty for non-(sysinit,boot,single) runlevels
231 -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 26 Jul 2001 13:26:56 +0200
233 sysvinit (2.79) cistron; urgency=low
235 * New upstream version
236 * several fixes to wall by Tim Robbins <fyre@box3n.gumbynet.org>
237 * Several extra boundary checks by Solar Designer
238 * Make /dev/console controlling tty
239 * Stricter checks on ownership of tty by mesg(1)
240 * Documented and restricted -n option to wall(1)
241 * Make it compile with glibc 2.2.2
242 * Document IO redirection in wall manpage (closes: #79491)
243 * Update README (closes: #85650)
244 * Fix init.8 manpage (closes: #75268)
245 * Fix typo in halt(8) manpage (closes: #67875)
246 * Check time argument of shutdown(8) for correctness (closes: #67825)
247 * Check for stale sessions in last(1) (Chris Wolf <cwolf@starclass.com>)
249 -- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 4 Jul 2001 15:04:36 +0200
251 sysvinit (2.78-2) frozen unstable; urgency=high
253 * Change "booting" to "reloading" message at reload
254 * Add "-z xxx" dummy command line argument (closes: #54717)
256 -- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 11 Feb 2000 12:17:54 +0100
258 sysvinit (2.78-1) unstable; urgency=low
260 * 2.78 will be the new upstream version, I'm skipping 2.77
261 * Shutdown now calls sync before switching the runlevel to 0 or 6,
262 or before unmounting filesystems if -n was used (closes: #46461)
263 * Some cosmetic changes to init.c (closes: #32079)
265 -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 30 Dec 1999 20:40:23 +0100
267 sysvinit (2.77-2) unstable; urgency=low
271 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 5 Oct 1999 21:51:50 +0200
273 sysvinit (2.77-1) unstable; urgency=low
275 * Write reboot record into utmp file as well to make rms happy
276 * Fork and dump core in / if SIGSEGV is received for debugging purposes
277 * Patch by Craig Sanders <cas@vicnet.net.au> for "last" -i option
279 -- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 4 Aug 1999 11:16:23 +0200
281 sysvinit (2.76-4) unstable; urgency=low
283 * Change dowall.c to handle Unix98 ptys correctly
284 * Add comment in rcS about usage of setup.sh and unconfigured.sh
285 * Shutdown now removes nologin file just before calling telinit
286 * SEGV handler now tries to continue after sleep of 30 seconds.
287 On a 386-class processor it also prints out the value of EIP.
288 * Fix for racecondition in check_init_fifo() by Richard Gooch
290 -- Miquel van Smoorenburg <miquels@cistron.nl> Sat, 8 May 1999 17:22:57 +0200
292 sysvinit (2.76-3) frozen unstable; urgency=high
294 * Small bugfix to last.c courtesy of Danek Duvall <duvall@emufarm.ml.org>
296 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 12 Jan 1999 12:12:44 +0100
298 sysvinit (2.76-1) frozen unstable; urgency=high
300 * Fix bug in check_pipe() which crashes init on the Alpha.
302 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 3 Nov 1998 11:09:13 +0100
304 sysvinit (2.75-4) unstable; urgency=low
306 * Change sulogin password buffer to 128 characters.
307 * Don't print control characters in dowall.c
308 * Try to open getenv ("CONSOLE"), /dev/console and /dev/tty0 in order.
309 For backwards compatibility when you try to boot a 2.0.x kernel
310 with a linux > 2.1.70 /dev/console device.
311 * Change src/Makefile for non-debian systems (mainly, RedHat)
312 * Try to create /dev/initctl if not present; check every time to see
313 if the dev/ino of /dev/initctl has changed and re-open it. This should
315 * Send SIGUSR1 to init at bootup to let it re-open /dev/initctl;
316 again in support of devfs.
317 * Moved pidof to /bin (it's only a link to killall5 anyway)
319 -- Miquel van Smoorenburg <miquels@cistron.nl> Mon, 5 Oct 1998 14:03:14 +0200
321 sysvinit (2.75-2) frozen unstable; urgency=medium
324 * Add check to see if /dev/initctl is really a FIFO
325 * In ifdown.c first down all shaper devices then the real devices
327 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 2 Jun 1998 22:43:01 +0200
329 sysvinit (2.75-1) frozen unstable; urgency=low
331 * Rewrote last.c to be much more memory friendly and correct,
332 thanks to Nick Andrew <nick@zeta.org.au> and
333 David Parrish <dparrish@zeta.org.au>
335 #21616: sysvinit: sulogin thinks md5 root password is bad
336 #21765: sysvinit: Typo in `killall5.c'
337 #21775: sysvinit: sysvinit does not support MD5 hashed passwords
338 #21990: /usr/bin/last: unnecessary memset and off-by-one bug
339 #22084: sysvinit 2.74-4: SIGPWR missing on sparc
340 #21900: init, powerfail events, and shutdown.allow
341 #21702: init 0 does not work as expected...
342 #21728: sysvinit: Typo in `init.c'
343 #22363: sysvinit: discrepance btw. manpage and /sbin/init
345 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 19 May 1998 11:02:29 +0200
347 sysvinit (2.74-4) frozen unstable; urgency=medium
349 * Add -o option to last to process libc5 utmp files.
350 * Buffer overflow fixed in init.c (not very serious; only exploitable
351 by root). Thanks to Chris Evans <chris@ferret.lmh.ox.ac.uk>
353 -- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 15 Apr 1998 17:04:33 +0200
355 sysvinit (2.74-1) unstable; urgency=low
357 * Should compile with glibc 1.99 :)
358 * Change behaviour of reboot(1) and halt(1) so that the default when
359 the runlevel can't be determined is to call shutdown.
360 * Added re-exec patch from Al Viro (21 Feb 1998):
361 'U' flag added to telinit. It forces init to re-exec itself
362 (passing its state through exec, certainly).
363 May be useful for smoother (heh) upgrades.
365 did_boot made global and added to state - thanks, Miquel.
366 Yet another file descriptors leak - close state pipe if
369 -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 12 Mar 1998 17:42:46 +0100
371 sysvinit (2.73-2) unstable; urgency=low
373 * Change _NSIG to NSIG for 2.1.x kernel includes.
375 -- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 8 Jan 1998 16:01:02 +0100
377 sysvinit (2.73-1) unstable; urgency=low
379 * Use siginterrupt, now that system calls are restarted by default.
380 Main symptom was that the sulogin timeout didn't work but there
381 might have been more hidden problems.
382 * Kill process immidiately if turned off in inittab
383 * Fixed sulogin check on tty arg.
384 * Use strerror() instead of sys_errlist
385 * wall now supports a '-n' option to suppress [most of] the banner.
386 Debian doesn't use sysvinit's wall, but apparently Redhat does.
387 * Add '-F' (forcefsck) option to shutdown
388 * Close and reopen /dev/initctl on SIGUSR1 (mainly for a /dev in ram)
390 -- Miquel van Smoorenburg <miquels@cistron.nl> Sat, 3 Jan 1998 16:32:39 +0100
392 sysvinit (2.72-3) unstable; urgency=low
394 * Add extra fork() in dowall.c to avoid hanging in rare cases
396 -- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 22 Oct 1997 14:44:00 +0200
398 sysvinit (2.72) unstable; urgency=low
400 * Applied manual page patches by Bill Hawes <whawes@star.net>. Thanks Bill!
401 * Applied patches to the sample Slackware scripts by
402 "Jonathan I. Kamens" <jik@kamens.brookline.ma.us>
403 * Fix halt and reboot runlevels 0 & 6 check.
404 * Only say "no more processes left in runlevel x" once
405 * Fix race condition with SIGCHLD in spawn()
406 (thanks to Alon Ziv <alonz@CS.Technion.AC.IL>)
407 * Compress all manpages (missed 2)
409 * Added poweroff patch by Roderich Schupp <rsch@ExperTeam.de>
411 -- Miquel van Smoorenburg <miquels@cistron.nl> Sun, 12 Oct 1997 17:20:17 +0200
413 sysvinit (2.71-2) frozen unstable; urgency=low
415 * Print 2.71 instead of 2.70 on startup :)
417 -- Miquel van Smoorenburg <miquels@cistron.nl> Mon, 5 May 1997 12:45:25 +0200
419 sysvinit (2.71-1) frozen unstable; urgency=high
421 * Added code for updwtmp() in utmp.c for glibc (2.0.3)
422 * Fixed all programs to use functions from utmp.c and getutent()
423 * Do not try to clean up utmp in init itself (Bug#9022)
424 * Removed sync() from main loop.
425 * Hopefully fixes bug #8657 (shutdown signal handling)
427 -- Miquel van Smoorenburg <miquels@cistron.nl> Sat, 26 Apr 1997 19:57:27 +0200
429 sysvinit (2.70-1) unstable; urgency=low
432 * Removed StUdLy CaPs from source code
433 * Moved files in source archive around
434 * Fixes for glibc (utmp handling, signal handling).
435 * Fixed '-d' option to last (now also works without '-a').
436 * Added extra checking in last.c to prevent showing dead entries
438 -- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 7 Feb 1997 15:31:30 +0100
440 sysvinit (2.69-1) frozen unstable; urgency=medium
442 * Fixed bug that can throw X in a loop (or any other app that reads from
445 -- Miquel van Smoorenburg <miquels@cistron.nl> Sun, 1 Dec 1996 15:32:24 +0100
447 sysvinit (2.67-1) frozen unstable; urgency=high
449 * Fixes problem with /dev/console being controlling terminal of some
451 * Puts copyright file in the right place
453 -- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 15 Nov 1996 12:23:33 +0100
455 sysvinit (2.66-1) unstable; urgency=medium
457 * Skipped 2.65. A development 2.65 got out by accident and is apparently
459 * Also compiles and runs with GNU libc (and on the Alpha)
460 * Fixed dowall.c not to exit when getpwuid() fails and uid == 0.
461 * Fixed init panic'ing on empty lines in /etc/inittab
462 * Changed default PATH to include /usr/local/sbin
463 * Set /dev/console as controlling terminal for sysinit,bootwait,wait,powerwait
464 This allows using ^C to interrupt some parts of eg the boot process.
465 * Remove old symlink in /var/log/initlvl; let init check both
466 /var/log and /etc itself.
468 -- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 29 Oct 1996 13:46:54 +0100
471 - Skipped 2.65. A development 2.65 got out by accident and is apparently
473 - Fixed dowall.c not to exit when getpwuid() fails and uid == 0.
474 - Fixed init panic'ing on empty lines in /etc/inittab
475 - Changed default PATH to include /usr/local/sbin
476 - Ported to Linux/Alpha and GNU libc.
477 - Set /dev/console as controlling terminal for sysinit,bootwait,wait,powerwait.
478 This allows using ^C to interrupt some parts of eg the boot process.
479 - Remove old symlink in /var/log/initlvl; let init check both
480 /var/log and /etc itself.
483 - Init checks CONSOLE environment variable on startup (overrides /dev/console)
484 - Init sets CONSOLE variable for all its children.
485 - Wtmp(): when zeroing out old utmp entries, keep ut_id field
486 - Wtmp(): try to re-use ut_id field if possible.
487 - SetTerm(): only read from /etc/ioctl.save if written once.
488 - Included start-stop-daemon, C version (source only).
489 - Fixed wait() for the emergency shell.
490 - killall5: ignore signal before doing kill(-1, pid).
493 - Fixed preinst script for Debian
494 - Fixed init.c to become init daemon if name is init.new
495 - Fixed pidof to not return PIDs of shell scripts
498 - Changed debian /etc/init.d/boot script to create a nologin file
499 at boot and to remove it just before going multiuser.
502 - Decided to release a 2.62 version with a BIG WARNING about upgrading
503 init in it. Will send a patch to Linus for the linux/Documentation/Changes
504 file so that 2.62 or later is mentioned as the version to upgrade to.
505 - Added docs for Slackware
508 - Fixed debian/etc/init.d/network for the lo device.
509 - Added "-xdev" to the cd /tmp && find in debian/etc/init.d/boot
510 - Made remove time for files in /tmp configurable.
513 - Changed /etc/init.d/boot script again
514 - Fixed problem in init.c with trailing whitespace after entries in inittab
515 - Fixed killall5 problems
516 - Added manpage for lastb
517 - Added SHELL= environment variable to sulogin
518 - Fixed sulogin & shadow problems
519 - Added timeout option to sulogin
522 - Fixed sulogin (didn't work if root wasn't first entry in shadow file)
523 - Fixed mesg for systems with "tty" group (such as Debian)
524 - Fixed nsyslog() in killall5.c
527 - Fixed race condition in init.c, resulting in hanging shutdowns.
528 Courtesy of Max Neunhoeffer <Max.Neunhoeffer@urz.uni-heidelberg.de>.
529 - Fixed debian/etc/init.d/boot for swapon and mdadd
530 - Added architecture to debian.control
531 - Added manpages for rc.boot and rc.local
532 - Updated inittab manpage for 4-character runlevel field
533 - Added debian replaces for bsdutils < version_without_mesg
534 - Fixed init.c so that it also works with kernels 1.3.81 and up
537 - Init logs less to syslog (suspected to hang in syslog() or openlog() )
538 - removed closelog() from init.c
539 - removed time check of runlevel record in halt.
540 - Added options to last to get hostname from ut_addr field
541 - Added last and mesg to installation targets
542 - rewrote /etc/init.d/boot a bit.
545 - Changed etc/init.d/rc to do a stty onlcr
546 - Added /var/log/initrunlvl symlink
549 - Added the latest debian files.
550 - Added support for 4-character id fields (if you have libc5).
551 - Fixed pidof (in killall5) parsing of /proc/.../stat
552 - Save restore GMT setting in /etc/init.d/boot
556 - Added "-b" flag to init, gives a shell before
557 anything else (in case the startup scripts are screwed)
558 - Moved fastboot to /fastboot
559 - Folded in Debian patches.
560 - Removed old scripts
561 - Added debian /etc/directory.
564 - Changed over to init_request (with initreq.h)
565 - Processes no longer killed when "process" field
566 changes, change takes effect after next respawn.
569 - Bugfix release for Debian and Slackware 3.0
572 - Fixed race condition init init.c wrt got_chld
573 - Fixed one-off for malloc in killall5.c
575 - Console code: no relink to /dev/systty on CTRL-ALT-DEL)
578 - Changed a few things here and there, didn't
579 really document it :)
582 - Added option to shutdown to run standalone.
585 - Added GNU copyrigh to all *.[ch] files.
586 - added /etc/initscript
587 - reboot and halt now call shutdown in runlevels 1-5
588 - Can run from read-only root (CDROM)
591 - Renamed pidof to killall5, updated all scripts to
592 use killall5 instead of kill -1 ....
593 - Rewrote scripts to use this, and some general changes.
594 - Added SysV command line compatibility to shutdown.
597 - Added `powerfailnow' keyword, for when UPS battery is low.
599 - Fixed utmp handling (wrt. CLEAN_UTMP)
601 * Make last compatible with GNU/BSD (long options?)
603 * remote SIGPWR broadcast? in powerd? (with priv. port)
607 - Ignores unknown command line arguments.
608 - Modelled more after the "real" sysVinit
609 - Lots of changes all over the place.
610 (like showing runlevel in "ps" listing, logging
611 runlevel into utmp file etc)
612 - now using "reliable" signals instead of V7 style.
613 - Updated all scripts. Examples are in two directories:
614 etc (normal) and etc-sysv (sysv style scripts).
615 - runlevel 0 = halt, 1 = single user, 6 = reboot.
616 - added support for serial console.
617 - updated Propaganda, manpages.
618 - added shutdown access control.
621 - Send out the official version into the world as
625 - Changed init to really catch SIGPWR 'cause we
626 hooked up an UPS to the Linux machine. The
627 keyword for catching the TreeFingerSalute is
628 now "ctrlaltdel" instead of "power{wait,fail}".
631 - Fixed last to reckognize BSD style wtmp logging.
632 - Changed init to write wtmp records that are
633 SysV compliant but are also reckognized by the
634 BSD last. Added a '+' option to the 'process'
635 field of inittab, for getties that want to do
636 their own utmp/wtmp housekeeping (kludge!).
637 - Now accepts a runlevel on the command line,
638 and reckognizes the 'auto' argument. (Sets the
639 environment variable AUTOBOOT to YES)
642 - Ripped out the 'leave' action. To difficult, and
644 - Going single user now kills _all_ processes.
645 - Added '-t secs' option to all commands.
646 - This version is stable enough to post.
649 - Made wait()'s asynchronous
650 - Changed whole thing to one big state machine
651 - Now using 'pseudo levels' # & * for SYSINIT & BOOT
652 - Added a new type of 'action', called leave. This
653 process will be executed when the system goes from a
654 runlevel specified in it's runlevel field to a
655 level that's not. Nice to bring down NFS and the like.
658 - Fixed a bug with 'boot' and 'once'.
659 - Check 'initdefault' for validity.
660 - Reckognizes "single" as command line argument.
661 - Retries execvp with 'sh -c exec ..' if command
662 is a shell script. (shouldn't execvp do this?)
663 - Added patches to use syslog if defined.
666 - Rewrote the code totally, so started with a new
668 - Dropped Minix support, this code now is Linux - specific.
669 - With TEST switch on, this init & telinit can
670 run standalone for test purposes.
673 - Got a 386, so installed Linux. Added 'soft' reboot
674 to be default under linux. Fixed some typos.
677 - Bugreport from Michael Haardt ; removed deadlock
678 and added 'waitpid' instead of 'wait' for SYSV.
681 - Read manual wrong: there is no 'action' field called
682 process, but all entries are of type process. Every
683 'process' get exec'ed by /bin/sh -c 'exec command'.
684 - Rapidly respawning processes are caught in the act.
685 - _SYSV support is really Linux support,
686 done by poe@daimi.aau.dk on 25-Mar-92.
689 - Initial version, very primitive for the Minix
690 operating system. Required some mods. to the