+the niosii-gnutools-src-5.1.tgz release from altera is missing a lot of
+core gcc files, this patch adds them back in
+
+--- ./gcc/gcc/config/nios2/crti.asm
++++ ./gcc/gcc/config/nios2/crti.asm
+@@ -0,0 +1,88 @@
++/*
++ Copyright (C) 2003
++ by Jonah Graham (jgraham@altera.com)
++
++This file is free software; you can redistribute it and/or modify it
++under the terms of the GNU General Public License as published by the
++Free Software Foundation; either version 2, or (at your option) any
++later version.
++
++In addition to the permissions in the GNU General Public License, the
++Free Software Foundation gives you unlimited permission to link the
++compiled version of this file with other programs, and to distribute
++those programs without any restriction coming from the use of this
++file. (The General Public License restrictions do apply in other
++respects; for example, they cover modification of the file, and
++distribution when not linked into another program.)
++
++This file is distributed in the hope that it will be useful, but
++WITHOUT ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++General Public License for more details.
++
++You should have received a copy of the GNU General Public License
++along with this program; see the file COPYING. If not, write to
++the Free Software Foundation, 59 Temple Place - Suite 330,
++Boston, MA 02111-1307, USA.
++
++ As a special exception, if you link this library with files
++ compiled with GCC to produce an executable, this does not cause
++ the resulting executable to be covered by the GNU General Public License.
++ This exception does not however invalidate any other reasons why
++ the executable file might be covered by the GNU General Public License.
++
++
++This file just make a stack frame for the contents of the .fini and
++.init sections. Users may put any desired instructions in those
++sections.
++
++
++While technically any code can be put in the init and fini sections
++most stuff will not work other than stuff which obeys the call frame
++and ABI. All the call-preserved registers are saved, the call clobbered
++registers should have been saved by the code calling init and fini.
++
++See crtstuff.c for an example of code that inserts itself in the
++init and fini sections.
++
++See crt0.s for the code that calls init and fini.
++*/
++
++ .file "crti.asm"
++
++ .section ".init"
++ .align 2
++ .global _init
++_init:
++ addi sp, sp, -48
++ stw ra, 44(sp)
++ stw r23, 40(sp)
++ stw r22, 36(sp)
++ stw r21, 32(sp)
++ stw r20, 28(sp)
++ stw r19, 24(sp)
++ stw r18, 20(sp)
++ stw r17, 16(sp)
++ stw r16, 12(sp)
++ stw fp, 8(sp)
++ mov fp, sp
++
++
++ .section ".fini"
++ .align 2
++ .global _fini
++_fini:
++ addi sp, sp, -48
++ stw ra, 44(sp)
++ stw r23, 40(sp)
++ stw r22, 36(sp)
++ stw r21, 32(sp)
++ stw r20, 28(sp)
++ stw r19, 24(sp)
++ stw r18, 20(sp)
++ stw r17, 16(sp)
++ stw r16, 12(sp)
++ stw fp, 8(sp)
++ mov fp, sp
++
++
+--- ./gcc/gcc/config/nios2/crtn.asm
++++ ./gcc/gcc/config/nios2/crtn.asm
+@@ -0,0 +1,70 @@
++/*
++ Copyright (C) 2003
++ by Jonah Graham (jgraham@altera.com)
++
++This file is free software; you can redistribute it and/or modify it
++under the terms of the GNU General Public License as published by the
++Free Software Foundation; either version 2, or (at your option) any
++later version.
++
++In addition to the permissions in the GNU General Public License, the
++Free Software Foundation gives you unlimited permission to link the
++compiled version of this file with other programs, and to distribute
++those programs without any restriction coming from the use of this
++file. (The General Public License restrictions do apply in other
++respects; for example, they cover modification of the file, and
++distribution when not linked into another program.)
++
++This file is distributed in the hope that it will be useful, but
++WITHOUT ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++General Public License for more details.
++
++You should have received a copy of the GNU General Public License
++along with this program; see the file COPYING. If not, write to
++the Free Software Foundation, 59 Temple Place - Suite 330,
++Boston, MA 02111-1307, USA.
++
++ As a special exception, if you link this library with files
++ compiled with GCC to produce an executable, this does not cause
++ the resulting executable to be covered by the GNU General Public License.
++ This exception does not however invalidate any other reasons why
++ the executable file might be covered by the GNU General Public License.
++
++
++This file just makes sure that the .fini and .init sections do in
++fact return. Users may put any desired instructions in those sections.
++This file is the last thing linked into any executable.
++*/
++ .file "crtn.asm"
++
++
++
++ .section ".init"
++ ldw ra, 44(sp)
++ ldw r23, 40(sp)
++ ldw r22, 36(sp)
++ ldw r21, 32(sp)
++ ldw r20, 28(sp)
++ ldw r19, 24(sp)
++ ldw r18, 20(sp)
++ ldw r17, 16(sp)
++ ldw r16, 12(sp)
++ ldw fp, 8(sp)
++ addi sp, sp, -48
++ ret
++
++ .section ".fini"
++ ldw ra, 44(sp)
++ ldw r23, 40(sp)
++ ldw r22, 36(sp)
++ ldw r21, 32(sp)
++ ldw r20, 28(sp)
++ ldw r19, 24(sp)
++ ldw r18, 20(sp)
++ ldw r17, 16(sp)
++ ldw r16, 12(sp)
++ ldw fp, 8(sp)
++ addi sp, sp, -48
++ ret
++
+--- ./gcc/gcc/config/nios2/lib2-divmod-hi.c
++++ ./gcc/gcc/config/nios2/lib2-divmod-hi.c
+@@ -0,0 +1,123 @@
++
++/* We include auto-host.h here to get HAVE_GAS_HIDDEN. This is
++ supposedly valid even though this is a "target" file. */
++#include "auto-host.h"
++
++
++#include "tconfig.h"
++#include "tsystem.h"
++#include "coretypes.h"
++#include "tm.h"
++
++
++/* Don't use `fancy_abort' here even if config.h says to use it. */
++#ifdef abort
++#undef abort
++#endif
++
++
++#ifdef HAVE_GAS_HIDDEN
++#define ATTRIBUTE_HIDDEN __attribute__ ((__visibility__ ("hidden")))
++#else
++#define ATTRIBUTE_HIDDEN
++#endif
++
++#include "libgcc2.h"
++
++extern HItype __modhi3 (HItype, HItype);
++extern HItype __divhi3 (HItype, HItype);
++extern HItype __umodhi3 (HItype, HItype);
++extern HItype __udivhi3 (HItype, HItype);
++
++static UHItype udivmodhi4(UHItype, UHItype, word_type);
++
++static UHItype
++udivmodhi4(UHItype num, UHItype den, word_type modwanted)
++{
++ UHItype bit = 1;
++ UHItype res = 0;
++
++ while (den < num && bit && !(den & (1L<<15)))
++ {
++ den <<=1;
++ bit <<=1;
++ }
++ while (bit)
++ {
++ if (num >= den)
++ {
++ num -= den;
++ res |= bit;
++ }
++ bit >>=1;
++ den >>=1;
++ }
++ if (modwanted) return num;
++ return res;
++}
++
++
++HItype
++__divhi3 (HItype a, HItype b)
++{
++ word_type neg = 0;
++ HItype res;
++
++ if (a < 0)
++ {
++ a = -a;
++ neg = !neg;
++ }
++
++ if (b < 0)
++ {
++ b = -b;
++ neg = !neg;
++ }
++
++ res = udivmodhi4 (a, b, 0);
++
++ if (neg)
++ res = -res;
++
++ return res;
++}
++
++
++HItype
++__modhi3 (HItype a, HItype b)
++{
++ word_type neg = 0;
++ HItype res;
++
++ if (a < 0)
++ {
++ a = -a;
++ neg = 1;
++ }
++
++ if (b < 0)
++ b = -b;
++
++ res = udivmodhi4 (a, b, 1);
++
++ if (neg)
++ res = -res;
++
++ return res;
++}
++
++
++HItype
++__udivhi3 (HItype a, HItype b)
++{
++ return udivmodhi4 (a, b, 0);
++}
++
++
++HItype
++__umodhi3 (HItype a, HItype b)
++{
++ return udivmodhi4 (a, b, 1);
++}
++
+--- ./gcc/gcc/config/nios2/lib2-divmod.c
++++ ./gcc/gcc/config/nios2/lib2-divmod.c
+@@ -0,0 +1,126 @@
++
++/* We include auto-host.h here to get HAVE_GAS_HIDDEN. This is
++ supposedly valid even though this is a "target" file. */
++#include "auto-host.h"
++
++
++#include "tconfig.h"
++#include "tsystem.h"
++#include "coretypes.h"
++#include "tm.h"
++
++
++/* Don't use `fancy_abort' here even if config.h says to use it. */
++#ifdef abort
++#undef abort
++#endif
++
++
++#ifdef HAVE_GAS_HIDDEN
++#define ATTRIBUTE_HIDDEN __attribute__ ((__visibility__ ("hidden")))
++#else
++#define ATTRIBUTE_HIDDEN
++#endif
++
++#include "libgcc2.h"
++
++extern SItype __modsi3 (SItype, SItype);
++extern SItype __divsi3 (SItype, SItype);
++extern SItype __umodsi3 (SItype, SItype);
++extern SItype __udivsi3 (SItype, SItype);
++
++static USItype udivmodsi4(USItype, USItype, word_type);
++
++/* 16-bit SI divide and modulo as used in NIOS */
++
++
++static USItype
++udivmodsi4(USItype num, USItype den, word_type modwanted)
++{
++ USItype bit = 1;
++ USItype res = 0;
++
++ while (den < num && bit && !(den & (1L<<31)))
++ {
++ den <<=1;
++ bit <<=1;
++ }
++ while (bit)
++ {
++ if (num >= den)
++ {
++ num -= den;
++ res |= bit;
++ }
++ bit >>=1;
++ den >>=1;
++ }
++ if (modwanted) return num;
++ return res;
++}
++
++
++SItype
++__divsi3 (SItype a, SItype b)
++{
++ word_type neg = 0;
++ SItype res;
++
++ if (a < 0)
++ {
++ a = -a;
++ neg = !neg;
++ }
++
++ if (b < 0)
++ {
++ b = -b;
++ neg = !neg;
++ }
++
++ res = udivmodsi4 (a, b, 0);
++
++ if (neg)
++ res = -res;
++
++ return res;
++}
++
++
++SItype
++__modsi3 (SItype a, SItype b)
++{
++ word_type neg = 0;
++ SItype res;
++
++ if (a < 0)
++ {
++ a = -a;
++ neg = 1;
++ }
++
++ if (b < 0)
++ b = -b;
++
++ res = udivmodsi4 (a, b, 1);
++
++ if (neg)
++ res = -res;
++
++ return res;
++}
++
++
++SItype
++__udivsi3 (SItype a, SItype b)
++{
++ return udivmodsi4 (a, b, 0);
++}
++
++
++SItype
++__umodsi3 (SItype a, SItype b)
++{
++ return udivmodsi4 (a, b, 1);
++}
++
+--- ./gcc/gcc/config/nios2/lib2-divtable.c
++++ ./gcc/gcc/config/nios2/lib2-divtable.c
+@@ -0,0 +1,46 @@
++
++/* We include auto-host.h here to get HAVE_GAS_HIDDEN. This is
++ supposedly valid even though this is a "target" file. */
++#include "auto-host.h"
++
++
++#include "tconfig.h"
++#include "tsystem.h"
++#include "coretypes.h"
++#include "tm.h"
++
++
++/* Don't use `fancy_abort' here even if config.h says to use it. */
++#ifdef abort
++#undef abort
++#endif
++
++
++#ifdef HAVE_GAS_HIDDEN
++#define ATTRIBUTE_HIDDEN __attribute__ ((__visibility__ ("hidden")))
++#else
++#define ATTRIBUTE_HIDDEN
++#endif
++
++#include "libgcc2.h"
++
++UQItype __divsi3_table[] =
++{
++ 0, 0/1, 0/2, 0/3, 0/4, 0/5, 0/6, 0/7, 0/8, 0/9, 0/10, 0/11, 0/12, 0/13, 0/14, 0/15,
++ 0, 1/1, 1/2, 1/3, 1/4, 1/5, 1/6, 1/7, 1/8, 1/9, 1/10, 1/11, 1/12, 1/13, 1/14, 1/15,
++ 0, 2/1, 2/2, 2/3, 2/4, 2/5, 2/6, 2/7, 2/8, 2/9, 2/10, 2/11, 2/12, 2/13, 2/14, 2/15,
++ 0, 3/1, 3/2, 3/3, 3/4, 3/5, 3/6, 3/7, 3/8, 3/9, 3/10, 3/11, 3/12, 3/13, 3/14, 3/15,
++ 0, 4/1, 4/2, 4/3, 4/4, 4/5, 4/6, 4/7, 4/8, 4/9, 4/10, 4/11, 4/12, 4/13, 4/14, 4/15,
++ 0, 5/1, 5/2, 5/3, 5/4, 5/5, 5/6, 5/7, 5/8, 5/9, 5/10, 5/11, 5/12, 5/13, 5/14, 5/15,
++ 0, 6/1, 6/2, 6/3, 6/4, 6/5, 6/6, 6/7, 6/8, 6/9, 6/10, 6/11, 6/12, 6/13, 6/14, 6/15,
++ 0, 7/1, 7/2, 7/3, 7/4, 7/5, 7/6, 7/7, 7/8, 7/9, 7/10, 7/11, 7/12, 7/13, 7/14, 7/15,
++ 0, 8/1, 8/2, 8/3, 8/4, 8/5, 8/6, 8/7, 8/8, 8/9, 8/10, 8/11, 8/12, 8/13, 8/14, 8/15,
++ 0, 9/1, 9/2, 9/3, 9/4, 9/5, 9/6, 9/7, 9/8, 9/9, 9/10, 9/11, 9/12, 9/13, 9/14, 9/15,
++ 0, 10/1, 10/2, 10/3, 10/4, 10/5, 10/6, 10/7, 10/8, 10/9, 10/10, 10/11, 10/12, 10/13, 10/14, 10/15,
++ 0, 11/1, 11/2, 11/3, 11/4, 11/5, 11/6, 11/7, 11/8, 11/9, 11/10, 11/11, 11/12, 11/13, 11/14, 11/15,
++ 0, 12/1, 12/2, 12/3, 12/4, 12/5, 12/6, 12/7, 12/8, 12/9, 12/10, 12/11, 12/12, 12/13, 12/14, 12/15,
++ 0, 13/1, 13/2, 13/3, 13/4, 13/5, 13/6, 13/7, 13/8, 13/9, 13/10, 13/11, 13/12, 13/13, 13/14, 13/15,
++ 0, 14/1, 14/2, 14/3, 14/4, 14/5, 14/6, 14/7, 14/8, 14/9, 14/10, 14/11, 14/12, 14/13, 14/14, 14/15,
++ 0, 15/1, 15/2, 15/3, 15/4, 15/5, 15/6, 15/7, 15/8, 15/9, 15/10, 15/11, 15/12, 15/13, 15/14, 15/15,
++};
++
+--- ./gcc/gcc/config/nios2/lib2-mul.c
++++ ./gcc/gcc/config/nios2/lib2-mul.c
+@@ -0,0 +1,103 @@
++/* while we are debugging (ie compile outside of gcc build)
++ disable gcc specific headers */
++#ifndef DEBUG_MULSI3
++
++
++/* We include auto-host.h here to get HAVE_GAS_HIDDEN. This is
++ supposedly valid even though this is a "target" file. */
++#include "auto-host.h"
++
++
++#include "tconfig.h"
++#include "tsystem.h"
++#include "coretypes.h"
++#include "tm.h"
++
++
++/* Don't use `fancy_abort' here even if config.h says to use it. */
++#ifdef abort
++#undef abort
++#endif
++
++
++#ifdef HAVE_GAS_HIDDEN
++#define ATTRIBUTE_HIDDEN __attribute__ ((__visibility__ ("hidden")))
++#else
++#define ATTRIBUTE_HIDDEN
++#endif
++
++#include "libgcc2.h"
++
++#else
++#define SItype int
++#define USItype unsigned int
++#endif
++
++
++extern SItype __mulsi3 (SItype, SItype);
++
++SItype
++__mulsi3 (SItype a, SItype b)
++{
++ SItype res = 0;
++ USItype cnt = a;
++
++ while (cnt)
++ {
++ if (cnt & 1)
++ {
++ res += b;
++ }
++ b <<= 1;
++ cnt >>= 1;
++ }
++
++ return res;
++}
++/*
++TODO: Choose best alternative implementation.
++
++SItype
++__divsi3 (SItype a, SItype b)
++{
++ SItype res = 0;
++ USItype cnt = 0;
++
++ while (cnt < 32)
++ {
++ if (a & (1L << cnt))
++ {
++ res += b;
++ }
++ b <<= 1;
++ cnt++;
++ }
++
++ return res;
++}
++*/
++
++
++#ifdef DEBUG_MULSI3
++
++int
++main ()
++{
++ int i, j;
++ int error = 0;
++
++ for (i = -1000; i < 1000; i++)
++ for (j = -1000; j < 1000; j++)
++ {
++ int expect = i * j;
++ int actual = A__divsi3 (i, j);
++ if (expect != actual)
++ {
++ printf ("error: %d * %d = %d not %d\n", i, j, expect, actual);
++ error = 1;
++ }
++ }
++
++ return error;
++}
++#endif
+--- ./gcc/gcc/config/nios2/nios2-dp-bit.c
++++ ./gcc/gcc/config/nios2/nios2-dp-bit.c
+@@ -0,0 +1,1652 @@
++
++/* This is a software floating point library which can be used
++ for targets without hardware floating point.
++ Copyright (C) 1994, 1995, 1996, 1997, 1998, 2000, 2001, 2002, 2003, 2004
++ Free Software Foundation, Inc.
++
++This file is free software; you can redistribute it and/or modify it
++under the terms of the GNU General Public License as published by the
++Free Software Foundation; either version 2, or (at your option) any
++later version.
++
++In addition to the permissions in the GNU General Public License, the
++Free Software Foundation gives you unlimited permission to link the
++compiled version of this file with other programs, and to distribute
++those programs without any restriction coming from the use of this
++file. (The General Public License restrictions do apply in other
++respects; for example, they cover modification of the file, and
++distribution when not linked into another program.)
++
++This file is distributed in the hope that it will be useful, but
++WITHOUT ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++General Public License for more details.
++
++You should have received a copy of the GNU General Public License
++along with this program; see the file COPYING. If not, write to
++the Free Software Foundation, 59 Temple Place - Suite 330,
++Boston, MA 02111-1307, USA. */
++
++/* As a special exception, if you link this library with other files,
++ some of which are compiled with GCC, to produce an executable,
++ this library does not by itself cause the resulting executable
++ to be covered by the GNU General Public License.
++ This exception does not however invalidate any other reasons why
++ the executable file might be covered by the GNU General Public License. */
++
++/* This implements IEEE 754 format arithmetic, but does not provide a
++ mechanism for setting the rounding mode, or for generating or handling
++ exceptions.
++
++ The original code by Steve Chamberlain, hacked by Mark Eichin and Jim
++ Wilson, all of Cygnus Support. */
++
++/* The intended way to use this file is to make two copies, add `#define FLOAT'
++ to one copy, then compile both copies and add them to libgcc.a. */
++
++#include "tconfig.h"
++#include "coretypes.h"
++#include "tm.h"
++#include "config/fp-bit.h"
++
++/* The following macros can be defined to change the behavior of this file:
++ FLOAT: Implement a `float', aka SFmode, fp library. If this is not
++ defined, then this file implements a `double', aka DFmode, fp library.
++ FLOAT_ONLY: Used with FLOAT, to implement a `float' only library, i.e.
++ don't include float->double conversion which requires the double library.
++ This is useful only for machines which can't support doubles, e.g. some
++ 8-bit processors.
++ CMPtype: Specify the type that floating point compares should return.
++ This defaults to SItype, aka int.
++ US_SOFTWARE_GOFAST: This makes all entry points use the same names as the
++ US Software goFast library.
++ _DEBUG_BITFLOAT: This makes debugging the code a little easier, by adding
++ two integers to the FLO_union_type.
++ NO_DENORMALS: Disable handling of denormals.
++ NO_NANS: Disable nan and infinity handling
++ SMALL_MACHINE: Useful when operations on QIs and HIs are faster
++ than on an SI */
++
++/* We don't currently support extended floats (long doubles) on machines
++ without hardware to deal with them.
++
++ These stubs are just to keep the linker from complaining about unresolved
++ references which can be pulled in from libio & libstdc++, even if the
++ user isn't using long doubles. However, they may generate an unresolved
++ external to abort if abort is not used by the function, and the stubs
++ are referenced from within libc, since libgcc goes before and after the
++ system library. */
++
++#ifdef DECLARE_LIBRARY_RENAMES
++ DECLARE_LIBRARY_RENAMES
++#endif
++
++#ifdef EXTENDED_FLOAT_STUBS
++extern void abort (void);
++void __extendsfxf2 (void) { abort(); }
++void __extenddfxf2 (void) { abort(); }
++void __truncxfdf2 (void) { abort(); }
++void __truncxfsf2 (void) { abort(); }
++void __fixxfsi (void) { abort(); }
++void __floatsixf (void) { abort(); }
++void __addxf3 (void) { abort(); }
++void __subxf3 (void) { abort(); }
++void __mulxf3 (void) { abort(); }
++void __divxf3 (void) { abort(); }
++void __negxf2 (void) { abort(); }
++void __eqxf2 (void) { abort(); }
++void __nexf2 (void) { abort(); }
++void __gtxf2 (void) { abort(); }
++void __gexf2 (void) { abort(); }
++void __lexf2 (void) { abort(); }
++void __ltxf2 (void) { abort(); }
++
++void __extendsftf2 (void) { abort(); }
++void __extenddftf2 (void) { abort(); }
++void __trunctfdf2 (void) { abort(); }
++void __trunctfsf2 (void) { abort(); }
++void __fixtfsi (void) { abort(); }
++void __floatsitf (void) { abort(); }
++void __addtf3 (void) { abort(); }
++void __subtf3 (void) { abort(); }
++void __multf3 (void) { abort(); }
++void __divtf3 (void) { abort(); }
++void __negtf2 (void) { abort(); }
++void __eqtf2 (void) { abort(); }
++void __netf2 (void) { abort(); }
++void __gttf2 (void) { abort(); }
++void __getf2 (void) { abort(); }
++void __letf2 (void) { abort(); }
++void __lttf2 (void) { abort(); }
++#else /* !EXTENDED_FLOAT_STUBS, rest of file */
++
++/* IEEE "special" number predicates */
++
++#ifdef NO_NANS
++
++#define nan() 0
++#define isnan(x) 0
++#define isinf(x) 0
++#else
++
++#if defined L_thenan_sf
++const fp_number_type __thenan_sf = { CLASS_SNAN, 0, 0, {(fractype) 0} };
++#elif defined L_thenan_df
++const fp_number_type __thenan_df = { CLASS_SNAN, 0, 0, {(fractype) 0} };
++#elif defined L_thenan_tf
++const fp_number_type __thenan_tf = { CLASS_SNAN, 0, 0, {(fractype) 0} };
++#elif defined TFLOAT
++extern const fp_number_type __thenan_tf;
++#elif defined FLOAT
++extern const fp_number_type __thenan_sf;
++#else
++extern const fp_number_type __thenan_df;
++#endif
++
++INLINE
++static fp_number_type *
++nan (void)
++{
++ /* Discard the const qualifier... */
++#ifdef TFLOAT
++ return (fp_number_type *) (& __thenan_tf);
++#elif defined FLOAT
++ return (fp_number_type *) (& __thenan_sf);
++#else
++ return (fp_number_type *) (& __thenan_df);
++#endif
++}
++
++INLINE
++static int
++isnan ( fp_number_type * x)
++{
++ return x->class == CLASS_SNAN || x->class == CLASS_QNAN;
++}
++
++INLINE
++static int
++isinf ( fp_number_type * x)
++{
++ return x->class == CLASS_INFINITY;
++}
++
++#endif /* NO_NANS */
++
++INLINE
++static int
++iszero ( fp_number_type * x)
++{
++ return x->class == CLASS_ZERO;
++}
++
++INLINE
++static void
++flip_sign ( fp_number_type * x)
++{
++ x->sign = !x->sign;
++}
++
++extern FLO_type pack_d ( fp_number_type * );
++
++#if defined(L_pack_df) || defined(L_pack_sf) || defined(L_pack_tf)
++FLO_type
++pack_d ( fp_number_type * src)
++{
++ FLO_union_type dst;
++ fractype fraction = src->fraction.ll; /* wasn't unsigned before? */
++ int sign = src->sign;
++ int exp = 0;
++
++ if (LARGEST_EXPONENT_IS_NORMAL (FRAC_NBITS) && (isnan (src) || isinf (src)))
++ {
++ /* We can't represent these values accurately. By using the
++ largest possible magnitude, we guarantee that the conversion
++ of infinity is at least as big as any finite number. */
++ exp = EXPMAX;
++ fraction = ((fractype) 1 << FRACBITS) - 1;
++ }
++ else if (isnan (src))
++ {
++ exp = EXPMAX;
++ if (src->class == CLASS_QNAN || 1)
++ {
++#ifdef QUIET_NAN_NEGATED
++ fraction |= QUIET_NAN - 1;
++#else
++ fraction |= QUIET_NAN;
++#endif
++ }
++ }
++ else if (isinf (src))
++ {
++ exp = EXPMAX;
++ fraction = 0;
++ }
++ else if (iszero (src))
++ {
++ exp = 0;
++ fraction = 0;
++ }
++ else if (fraction == 0)
++ {
++ exp = 0;
++ }
++ else
++ {
++ if (src->normal_exp < NORMAL_EXPMIN)
++ {
++#ifdef NO_DENORMALS
++ /* Go straight to a zero representation if denormals are not
++ supported. The denormal handling would be harmless but
++ isn't unnecessary. */
++ exp = 0;
++ fraction = 0;
++#else /* NO_DENORMALS */
++ /* This number's exponent is too low to fit into the bits
++ available in the number, so we'll store 0 in the exponent and
++ shift the fraction to the right to make up for it. */
++
++ int shift = NORMAL_EXPMIN - src->normal_exp;
++
++ exp = 0;
++
++ if (shift > FRAC_NBITS - NGARDS)
++ {
++ /* No point shifting, since it's more that 64 out. */
++ fraction = 0;
++ }
++ else
++ {
++ int lowbit = (fraction & (((fractype)1 << shift) - 1)) ? 1 : 0;
++ fraction = (fraction >> shift) | lowbit;
++ }
++ if ((fraction & GARDMASK) == GARDMSB)
++ {
++ if ((fraction & (1 << NGARDS)))
++ fraction += GARDROUND + 1;
++ }
++ else
++ {
++ /* Add to the guards to round up. */
++ fraction += GARDROUND;
++ }
++ /* Perhaps the rounding means we now need to change the
++ exponent, because the fraction is no longer denormal. */
++ if (fraction >= IMPLICIT_1)
++ {
++ exp += 1;
++ }
++ fraction >>= NGARDS;
++#endif /* NO_DENORMALS */
++ }
++ else if (!LARGEST_EXPONENT_IS_NORMAL (FRAC_NBITS)
++ && src->normal_exp > EXPBIAS)
++ {
++ exp = EXPMAX;
++ fraction = 0;
++ }
++ else
++ {
++ exp = src->normal_exp + EXPBIAS;
++ if (!ROUND_TOWARDS_ZERO)
++ {
++ /* IF the gard bits are the all zero, but the first, then we're
++ half way between two numbers, choose the one which makes the
++ lsb of the answer 0. */
++ if ((fraction & GARDMASK) == GARDMSB)
++ {
++ if (fraction & (1 << NGARDS))
++ fraction += GARDROUND + 1;
++ }
++ else
++ {
++ /* Add a one to the guards to round up */
++ fraction += GARDROUND;
++ }
++ if (fraction >= IMPLICIT_2)
++ {
++ fraction >>= 1;
++ exp += 1;
++ }
++ }
++ fraction >>= NGARDS;
++
++ if (LARGEST_EXPONENT_IS_NORMAL (FRAC_NBITS) && exp > EXPMAX)
++ {
++ /* Saturate on overflow. */
++ exp = EXPMAX;
++ fraction = ((fractype) 1 << FRACBITS) - 1;
++ }
++ }
++ }
++
++ /* We previously used bitfields to store the number, but this doesn't
++ handle little/big endian systems conveniently, so use shifts and
++ masks */
++#ifdef FLOAT_BIT_ORDER_MISMATCH
++ dst.bits.fraction = fraction;
++ dst.bits.exp = exp;
++ dst.bits.sign = sign;
++#else
++# if defined TFLOAT && defined HALFFRACBITS
++ {
++ halffractype high, low, unity;
++ int lowsign, lowexp;
++
++ unity = (halffractype) 1 << HALFFRACBITS;
++
++ /* Set HIGH to the high double's significand, masking out the implicit 1.
++ Set LOW to the low double's full significand. */
++ high = (fraction >> (FRACBITS - HALFFRACBITS)) & (unity - 1);
++ low = fraction & (unity * 2 - 1);
++
++ /* Get the initial sign and exponent of the low double. */
++ lowexp = exp - HALFFRACBITS - 1;
++ lowsign = sign;
++
++ /* HIGH should be rounded like a normal double, making |LOW| <=
++ 0.5 ULP of HIGH. Assume round-to-nearest. */
++ if (exp < EXPMAX)
++ if (low > unity || (low == unity && (high & 1) == 1))
++ {
++ /* Round HIGH up and adjust LOW to match. */
++ high++;
++ if (high == unity)
++ {
++ /* May make it infinite, but that's OK. */
++ high = 0;
++ exp++;
++ }
++ low = unity * 2 - low;
++ lowsign ^= 1;
++ }
++
++ high |= (halffractype) exp << HALFFRACBITS;
++ high |= (halffractype) sign << (HALFFRACBITS + EXPBITS);
++
++ if (exp == EXPMAX || exp == 0 || low == 0)
++ low = 0;
++ else
++ {
++ while (lowexp > 0 && low < unity)
++ {
++ low <<= 1;
++ lowexp--;
++ }
++
++ if (lowexp <= 0)
++ {
++ halffractype roundmsb, round;
++ int shift;
++
++ shift = 1 - lowexp;
++ roundmsb = (1 << (shift - 1));
++ round = low & ((roundmsb << 1) - 1);
++
++ low >>= shift;
++ lowexp = 0;
++
++ if (round > roundmsb || (round == roundmsb && (low & 1) == 1))
++ {
++ low++;
++ if (low == unity)
++ /* LOW rounds up to the smallest normal number. */
++ lowexp++;
++ }
++ }
++
++ low &= unity - 1;
++ low |= (halffractype) lowexp << HALFFRACBITS;
++ low |= (halffractype) lowsign << (HALFFRACBITS + EXPBITS);
++ }
++ dst.value_raw = ((fractype) high << HALFSHIFT) | low;
++ }
++# else
++ dst.value_raw = fraction & ((((fractype)1) << FRACBITS) - (fractype)1);
++ dst.value_raw |= ((fractype) (exp & ((1 << EXPBITS) - 1))) << FRACBITS;
++ dst.value_raw |= ((fractype) (sign & 1)) << (FRACBITS | EXPBITS);
++# endif
++#endif
++
++#if defined(FLOAT_WORD_ORDER_MISMATCH) && !defined(FLOAT)
++#ifdef TFLOAT
++ {
++ qrtrfractype tmp1 = dst.words[0];
++ qrtrfractype tmp2 = dst.words[1];
++ dst.words[0] = dst.words[3];
++ dst.words[1] = dst.words[2];
++ dst.words[2] = tmp2;
++ dst.words[3] = tmp1;
++ }
++#else
++ {
++ halffractype tmp = dst.words[0];
++ dst.words[0] = dst.words[1];
++ dst.words[1] = tmp;
++ }
++#endif
++#endif
++
++ return dst.value;
++}
++#endif
++
++#if defined(L_unpack_df) || defined(L_unpack_sf) || defined(L_unpack_tf)
++void
++unpack_d (FLO_union_type * src, fp_number_type * dst)
++{
++ /* We previously used bitfields to store the number, but this doesn't
++ handle little/big endian systems conveniently, so use shifts and
++ masks */
++ fractype fraction;
++ int exp;
++ int sign;
++
++#if defined(FLOAT_WORD_ORDER_MISMATCH) && !defined(FLOAT)
++ FLO_union_type swapped;
++
++#ifdef TFLOAT
++ swapped.words[0] = src->words[3];
++ swapped.words[1] = src->words[2];
++ swapped.words[2] = src->words[1];
++ swapped.words[3] = src->words[0];
++#else
++ swapped.words[0] = src->words[1];
++ swapped.words[1] = src->words[0];
++#endif
++ src = &swapped;
++#endif
++
++#ifdef FLOAT_BIT_ORDER_MISMATCH
++ fraction = src->bits.fraction;
++ exp = src->bits.exp;
++ sign = src->bits.sign;
++#else
++# if defined TFLOAT && defined HALFFRACBITS
++ {
++ halffractype high, low;
++
++ high = src->value_raw >> HALFSHIFT;
++ low = src->value_raw & (((fractype)1 << HALFSHIFT) - 1);
++
++ fraction = high & ((((fractype)1) << HALFFRACBITS) - 1);
++ fraction <<= FRACBITS - HALFFRACBITS;
++ exp = ((int)(high >> HALFFRACBITS)) & ((1 << EXPBITS) - 1);
++ sign = ((int)(high >> (((HALFFRACBITS + EXPBITS))))) & 1;
++
++ if (exp != EXPMAX && exp != 0 && low != 0)
++ {
++ int lowexp = ((int)(low >> HALFFRACBITS)) & ((1 << EXPBITS) - 1);
++ int lowsign = ((int)(low >> (((HALFFRACBITS + EXPBITS))))) & 1;
++ int shift;
++ fractype xlow;
++
++ xlow = low & ((((fractype)1) << HALFFRACBITS) - 1);
++ if (lowexp)
++ xlow |= (((halffractype)1) << HALFFRACBITS);
++ else
++ lowexp = 1;
++ shift = (FRACBITS - HALFFRACBITS) - (exp - lowexp);
++ if (shift > 0)
++ xlow <<= shift;
++ else if (shift < 0)
++ xlow >>= -shift;
++ if (sign == lowsign)
++ fraction += xlow;
++ else if (fraction >= xlow)
++ fraction -= xlow;
++ else
++ {
++ /* The high part is a power of two but the full number is lower.
++ This code will leave the implicit 1 in FRACTION, but we'd
++ have added that below anyway. */
++ fraction = (((fractype) 1 << FRACBITS) - xlow) << 1;
++ exp--;
++ }
++ }
++ }
++# else
++ fraction = src->value_raw & ((((fractype)1) << FRACBITS) - 1);
++ exp = ((int)(src->value_raw >> FRACBITS)) & ((1 << EXPBITS) - 1);
++ sign = ((int)(src->value_raw >> (FRACBITS + EXPBITS))) & 1;
++# endif
++#endif
++
++ dst->sign = sign;
++ if (exp == 0)
++ {
++ /* Hmm. Looks like 0 */
++ if (fraction == 0
++#ifdef NO_DENORMALS
++ || 1
++#endif
++ )
++ {
++ /* tastes like zero */
++ dst->class = CLASS_ZERO;
++ }
++ else
++ {
++ /* Zero exponent with nonzero fraction - it's denormalized,
++ so there isn't a leading implicit one - we'll shift it so
++ it gets one. */
++ dst->normal_exp = exp - EXPBIAS + 1;
++ fraction <<= NGARDS;
++
++ dst->class = CLASS_NUMBER;
++#if 1
++ while (fraction < IMPLICIT_1)
++ {
++ fraction <<= 1;
++ dst->normal_exp--;
++ }
++#endif
++ dst->fraction.ll = fraction;
++ }
++ }
++ else if (!LARGEST_EXPONENT_IS_NORMAL (FRAC_NBITS) && exp == EXPMAX)
++ {
++ /* Huge exponent*/
++ if (fraction == 0)
++ {
++ /* Attached to a zero fraction - means infinity */
++ dst->class = CLASS_INFINITY;
++ }
++ else
++ {
++ /* Nonzero fraction, means nan */
++#ifdef QUIET_NAN_NEGATED
++ if ((fraction & QUIET_NAN) == 0)
++#else
++ if (fraction & QUIET_NAN)
++#endif
++ {
++ dst->class = CLASS_QNAN;
++ }
++ else
++ {
++ dst->class = CLASS_SNAN;
++ }
++ /* Keep the fraction part as the nan number */
++ dst->fraction.ll = fraction;
++ }
++ }
++ else
++ {
++ /* Nothing strange about this number */
++ dst->normal_exp = exp - EXPBIAS;
++ dst->class = CLASS_NUMBER;
++ dst->fraction.ll = (fraction << NGARDS) | IMPLICIT_1;
++ }
++}
++#endif /* L_unpack_df || L_unpack_sf */
++
++#if defined(L_addsub_sf) || defined(L_addsub_df) || defined(L_addsub_tf)
++static fp_number_type *
++_fpadd_parts (fp_number_type * a,
++ fp_number_type * b,
++ fp_number_type * tmp)
++{
++ intfrac tfraction;
++
++ /* Put commonly used fields in local variables. */
++ int a_normal_exp;
++ int b_normal_exp;
++ fractype a_fraction;
++ fractype b_fraction;
++
++ if (isnan (a))
++ {
++ return a;
++ }
++ if (isnan (b))
++ {
++ return b;
++ }
++ if (isinf (a))
++ {
++ /* Adding infinities with opposite signs yields a NaN. */
++ if (isinf (b) && a->sign != b->sign)
++ return nan ();
++ return a;
++ }
++ if (isinf (b))
++ {
++ return b;
++ }
++ if (iszero (b))
++ {
++ if (iszero (a))
++ {
++ *tmp = *a;
++ tmp->sign = a->sign & b->sign;
++ return tmp;
++ }
++ return a;
++ }
++ if (iszero (a))
++ {
++ return b;
++ }
++
++ /* Got two numbers. shift the smaller and increment the exponent till
++ they're the same */
++ {
++ int diff;
++
++ a_normal_exp = a->normal_exp;
++ b_normal_exp = b->normal_exp;
++ a_fraction = a->fraction.ll;
++ b_fraction = b->fraction.ll;
++
++ diff = a_normal_exp - b_normal_exp;
++
++ if (diff < 0)
++ diff = -diff;
++ if (diff < FRAC_NBITS)
++ {
++ /* ??? This does shifts one bit at a time. Optimize. */
++ while (a_normal_exp > b_normal_exp)
++ {
++ b_normal_exp++;
++ LSHIFT (b_fraction);
++ }
++ while (b_normal_exp > a_normal_exp)
++ {
++ a_normal_exp++;
++ LSHIFT (a_fraction);
++ }
++ }
++ else
++ {
++ /* Somethings's up.. choose the biggest */
++ if (a_normal_exp > b_normal_exp)
++ {
++ b_normal_exp = a_normal_exp;
++ b_fraction = 0;
++ }
++ else
++ {
++ a_normal_exp = b_normal_exp;
++ a_fraction = 0;
++ }
++ }
++ }
++
++ if (a->sign != b->sign)
++ {
++ if (a->sign)
++ {
++ tfraction = -a_fraction + b_fraction;
++ }
++ else
++ {
++ tfraction = a_fraction - b_fraction;
++ }
++ if (tfraction >= 0)
++ {
++ tmp->sign = 0;
++ tmp->normal_exp = a_normal_exp;
++ tmp->fraction.ll = tfraction;
++ }
++ else
++ {
++ tmp->sign = 1;
++ tmp->normal_exp = a_normal_exp;
++ tmp->fraction.ll = -tfraction;
++ }
++ /* and renormalize it */
++
++ while (tmp->fraction.ll < IMPLICIT_1 && tmp->fraction.ll)
++ {
++ tmp->fraction.ll <<= 1;
++ tmp->normal_exp--;
++ }
++ }
++ else
++ {
++ tmp->sign = a->sign;
++ tmp->normal_exp = a_normal_exp;
++ tmp->fraction.ll = a_fraction + b_fraction;
++ }
++ tmp->class = CLASS_NUMBER;
++ /* Now the fraction is added, we have to shift down to renormalize the
++ number */
++
++ if (tmp->fraction.ll >= IMPLICIT_2)
++ {
++ LSHIFT (tmp->fraction.ll);
++ tmp->normal_exp++;
++ }
++ return tmp;
++
++}
++
++FLO_type
++add (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ fp_number_type tmp;
++ fp_number_type *res;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ res = _fpadd_parts (&a, &b, &tmp);
++
++ return pack_d (res);
++}
++
++FLO_type
++sub (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ fp_number_type tmp;
++ fp_number_type *res;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ b.sign ^= 1;
++
++ res = _fpadd_parts (&a, &b, &tmp);
++
++ return pack_d (res);
++}
++#endif /* L_addsub_sf || L_addsub_df */
++
++#if defined(L_mul_sf) || defined(L_mul_df) || defined(L_mul_tf)
++static inline __attribute__ ((__always_inline__)) fp_number_type *
++_fpmul_parts ( fp_number_type * a,
++ fp_number_type * b,
++ fp_number_type * tmp)
++{
++ fractype low = 0;
++ fractype high = 0;
++
++ if (isnan (a))
++ {
++ a->sign = a->sign != b->sign;
++ return a;
++ }
++ if (isnan (b))
++ {
++ b->sign = a->sign != b->sign;
++ return b;
++ }
++ if (isinf (a))
++ {
++ if (iszero (b))
++ return nan ();
++ a->sign = a->sign != b->sign;
++ return a;
++ }
++ if (isinf (b))
++ {
++ if (iszero (a))
++ {
++ return nan ();
++ }
++ b->sign = a->sign != b->sign;
++ return b;
++ }
++ if (iszero (a))
++ {
++ a->sign = a->sign != b->sign;
++ return a;
++ }
++ if (iszero (b))
++ {
++ b->sign = a->sign != b->sign;
++ return b;
++ }
++
++ /* Calculate the mantissa by multiplying both numbers to get a
++ twice-as-wide number. */
++ {
++#if defined(NO_DI_MODE) || defined(TFLOAT)
++ {
++ fractype x = a->fraction.ll;
++ fractype ylow = b->fraction.ll;
++ fractype yhigh = 0;
++ int bit;
++
++ /* ??? This does multiplies one bit at a time. Optimize. */
++ for (bit = 0; bit < FRAC_NBITS; bit++)
++ {
++ int carry;
++
++ if (x & 1)
++ {
++ carry = (low += ylow) < ylow;
++ high += yhigh + carry;
++ }
++ yhigh <<= 1;
++ if (ylow & FRACHIGH)
++ {
++ yhigh |= 1;
++ }
++ ylow <<= 1;
++ x >>= 1;
++ }
++ }
++#elif defined(FLOAT)
++ /* Multiplying two USIs to get a UDI, we're safe. */
++ {
++ UDItype answer = (UDItype)a->fraction.ll * (UDItype)b->fraction.ll;
++
++ high = answer >> BITS_PER_SI;
++ low = answer;
++ }
++#else
++ /* fractype is DImode, but we need the result to be twice as wide.
++ Assuming a widening multiply from DImode to TImode is not
++ available, build one by hand. */
++ {
++ USItype nl = a->fraction.ll;
++ USItype nh = a->fraction.ll >> BITS_PER_SI;
++ USItype ml = b->fraction.ll;
++ USItype mh = b->fraction.ll >> BITS_PER_SI;
++ UDItype pp_ll = (UDItype) ml * nl;
++ UDItype pp_hl = (UDItype) mh * nl;
++ UDItype pp_lh = (UDItype) ml * nh;
++ UDItype pp_hh = (UDItype) mh * nh;
++ UDItype res2 = 0;
++ UDItype res0 = 0;
++ UDItype ps_hh__ = pp_hl + pp_lh;
++ if (ps_hh__ < pp_hl)
++ res2 += (UDItype)1 << BITS_PER_SI;
++ pp_hl = (UDItype)(USItype)ps_hh__ << BITS_PER_SI;
++ res0 = pp_ll + pp_hl;
++ if (res0 < pp_ll)
++ res2++;
++ res2 += (ps_hh__ >> BITS_PER_SI) + pp_hh;
++ high = res2;
++ low = res0;
++ }
++#endif
++ }
++
++ tmp->normal_exp = a->normal_exp + b->normal_exp
++ + FRAC_NBITS - (FRACBITS + NGARDS);
++ tmp->sign = a->sign != b->sign;
++ while (high >= IMPLICIT_2)
++ {
++ tmp->normal_exp++;
++ if (high & 1)
++ {
++ low >>= 1;
++ low |= FRACHIGH;
++ }
++ high >>= 1;
++ }
++ while (high < IMPLICIT_1)
++ {
++ tmp->normal_exp--;
++
++ high <<= 1;
++ if (low & FRACHIGH)
++ high |= 1;
++ low <<= 1;
++ }
++ /* rounding is tricky. if we only round if it won't make us round later. */
++#if 0
++ if (low & FRACHIGH2)
++ {
++ if (((high & GARDMASK) != GARDMSB)
++ && (((high + 1) & GARDMASK) == GARDMSB))
++ {
++ /* don't round, it gets done again later. */
++ }
++ else
++ {
++ high++;
++ }
++ }
++#endif
++ if (!ROUND_TOWARDS_ZERO && (high & GARDMASK) == GARDMSB)
++ {
++ if (high & (1 << NGARDS))
++ {
++ /* half way, so round to even */
++ high += GARDROUND + 1;
++ }
++ else if (low)
++ {
++ /* but we really weren't half way */
++ high += GARDROUND + 1;
++ }
++ }
++ tmp->fraction.ll = high;
++ tmp->class = CLASS_NUMBER;
++ return tmp;
++}
++
++FLO_type
++multiply (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ fp_number_type tmp;
++ fp_number_type *res;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ res = _fpmul_parts (&a, &b, &tmp);
++
++ return pack_d (res);
++}
++#endif /* L_mul_sf || L_mul_df */
++
++#if defined(L_div_sf) || defined(L_div_df) || defined(L_div_tf)
++static inline __attribute__ ((__always_inline__)) fp_number_type *
++_fpdiv_parts (fp_number_type * a,
++ fp_number_type * b)
++{
++ fractype bit;
++ fractype numerator;
++ fractype denominator;
++ fractype quotient;
++
++ if (isnan (a))
++ {
++ return a;
++ }
++ if (isnan (b))
++ {
++ return b;
++ }
++
++ a->sign = a->sign ^ b->sign;
++
++ if (isinf (a) || iszero (a))
++ {
++ if (a->class == b->class)
++ return nan ();
++ return a;
++ }
++
++ if (isinf (b))
++ {
++ a->fraction.ll = 0;
++ a->normal_exp = 0;
++ return a;
++ }
++ if (iszero (b))
++ {
++ a->class = CLASS_INFINITY;
++ return a;
++ }
++
++ /* Calculate the mantissa by multiplying both 64bit numbers to get a
++ 128 bit number */
++ {
++ /* quotient =
++ ( numerator / denominator) * 2^(numerator exponent - denominator exponent)
++ */
++
++ a->normal_exp = a->normal_exp - b->normal_exp;
++ numerator = a->fraction.ll;
++ denominator = b->fraction.ll;
++
++ if (numerator < denominator)
++ {
++ /* Fraction will be less than 1.0 */
++ numerator *= 2;
++ a->normal_exp--;
++ }
++ bit = IMPLICIT_1;
++ quotient = 0;
++ /* ??? Does divide one bit at a time. Optimize. */
++ while (bit)
++ {
++ if (numerator >= denominator)
++ {
++ quotient |= bit;
++ numerator -= denominator;
++ }
++ bit >>= 1;
++ numerator *= 2;
++ }
++
++ if (!ROUND_TOWARDS_ZERO && (quotient & GARDMASK) == GARDMSB)
++ {
++ if (quotient & (1 << NGARDS))
++ {
++ /* half way, so round to even */
++ quotient += GARDROUND + 1;
++ }
++ else if (numerator)
++ {
++ /* but we really weren't half way, more bits exist */
++ quotient += GARDROUND + 1;
++ }
++ }
++
++ a->fraction.ll = quotient;
++ return (a);
++ }
++}
++
++FLO_type
++divide (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ fp_number_type *res;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ res = _fpdiv_parts (&a, &b);
++
++ return pack_d (res);
++}
++#endif /* L_div_sf || L_div_df */
++
++#if defined(L_fpcmp_parts_sf) || defined(L_fpcmp_parts_df) \
++ || defined(L_fpcmp_parts_tf)
++/* according to the demo, fpcmp returns a comparison with 0... thus
++ a<b -> -1
++ a==b -> 0
++ a>b -> +1
++ */
++
++int
++__fpcmp_parts (fp_number_type * a, fp_number_type * b)
++{
++#if 0
++ /* either nan -> unordered. Must be checked outside of this routine. */
++ if (isnan (a) && isnan (b))
++ {
++ return 1; /* still unordered! */
++ }
++#endif
++
++ if (isnan (a) || isnan (b))
++ {
++ return 1; /* how to indicate unordered compare? */
++ }
++ if (isinf (a) && isinf (b))
++ {
++ /* +inf > -inf, but +inf != +inf */
++ /* b \a| +inf(0)| -inf(1)
++ ______\+--------+--------
++ +inf(0)| a==b(0)| a<b(-1)
++ -------+--------+--------
++ -inf(1)| a>b(1) | a==b(0)
++ -------+--------+--------
++ So since unordered must be nonzero, just line up the columns...
++ */
++ return b->sign - a->sign;
++ }
++ /* but not both... */
++ if (isinf (a))
++ {
++ return a->sign ? -1 : 1;
++ }
++ if (isinf (b))
++ {
++ return b->sign ? 1 : -1;
++ }
++ if (iszero (a) && iszero (b))
++ {
++ return 0;
++ }
++ if (iszero (a))
++ {
++ return b->sign ? 1 : -1;
++ }
++ if (iszero (b))
++ {
++ return a->sign ? -1 : 1;
++ }
++ /* now both are "normal". */
++ if (a->sign != b->sign)
++ {
++ /* opposite signs */
++ return a->sign ? -1 : 1;
++ }
++ /* same sign; exponents? */
++ if (a->normal_exp > b->normal_exp)
++ {
++ return a->sign ? -1 : 1;
++ }
++ if (a->normal_exp < b->normal_exp)
++ {
++ return a->sign ? 1 : -1;
++ }
++ /* same exponents; check size. */
++ if (a->fraction.ll > b->fraction.ll)
++ {
++ return a->sign ? -1 : 1;
++ }
++ if (a->fraction.ll < b->fraction.ll)
++ {
++ return a->sign ? 1 : -1;
++ }
++ /* after all that, they're equal. */
++ return 0;
++}
++#endif
++
++#if defined(L_compare_sf) || defined(L_compare_df) || defined(L_compoare_tf)
++CMPtype
++compare (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ return __fpcmp_parts (&a, &b);
++}
++#endif /* L_compare_sf || L_compare_df */
++
++#ifndef US_SOFTWARE_GOFAST
++
++/* These should be optimized for their specific tasks someday. */
++
++#if defined(L_eq_sf) || defined(L_eq_df) || defined(L_eq_tf)
++CMPtype
++_eq_f2 (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ if (isnan (&a) || isnan (&b))
++ return 1; /* false, truth == 0 */
++
++ return __fpcmp_parts (&a, &b) ;
++}
++#endif /* L_eq_sf || L_eq_df */
++
++#if defined(L_ne_sf) || defined(L_ne_df) || defined(L_ne_tf)
++CMPtype
++_ne_f2 (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ if (isnan (&a) || isnan (&b))
++ return 1; /* true, truth != 0 */
++
++ return __fpcmp_parts (&a, &b) ;
++}
++#endif /* L_ne_sf || L_ne_df */
++
++#if defined(L_gt_sf) || defined(L_gt_df) || defined(L_gt_tf)
++CMPtype
++_gt_f2 (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ if (isnan (&a) || isnan (&b))
++ return -1; /* false, truth > 0 */
++
++ return __fpcmp_parts (&a, &b);
++}
++#endif /* L_gt_sf || L_gt_df */
++
++#if defined(L_ge_sf) || defined(L_ge_df) || defined(L_ge_tf)
++CMPtype
++_ge_f2 (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ if (isnan (&a) || isnan (&b))
++ return -1; /* false, truth >= 0 */
++ return __fpcmp_parts (&a, &b) ;
++}
++#endif /* L_ge_sf || L_ge_df */
++
++#if defined(L_lt_sf) || defined(L_lt_df) || defined(L_lt_tf)
++CMPtype
++_lt_f2 (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ if (isnan (&a) || isnan (&b))
++ return 1; /* false, truth < 0 */
++
++ return __fpcmp_parts (&a, &b);
++}
++#endif /* L_lt_sf || L_lt_df */
++
++#if defined(L_le_sf) || defined(L_le_df) || defined(L_le_tf)
++CMPtype
++_le_f2 (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ if (isnan (&a) || isnan (&b))
++ return 1; /* false, truth <= 0 */
++
++ return __fpcmp_parts (&a, &b) ;
++}
++#endif /* L_le_sf || L_le_df */
++
++#endif /* ! US_SOFTWARE_GOFAST */
++
++#if defined(L_unord_sf) || defined(L_unord_df) || defined(L_unord_tf)
++CMPtype
++_unord_f2 (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ return (isnan (&a) || isnan (&b));
++}
++#endif /* L_unord_sf || L_unord_df */
++
++#if defined(L_si_to_sf) || defined(L_si_to_df) || defined(L_si_to_tf)
++FLO_type
++si_to_float (SItype arg_a)
++{
++ fp_number_type in;
++
++ in.class = CLASS_NUMBER;
++ in.sign = arg_a < 0;
++ if (!arg_a)
++ {
++ in.class = CLASS_ZERO;
++ }
++ else
++ {
++ in.normal_exp = FRACBITS + NGARDS;
++ if (in.sign)
++ {
++ /* Special case for minint, since there is no +ve integer
++ representation for it */
++ if (arg_a == (- MAX_SI_INT - 1))
++ {
++ return (FLO_type)(- MAX_SI_INT - 1);
++ }
++ in.fraction.ll = (-arg_a);
++ }
++ else
++ in.fraction.ll = arg_a;
++
++ while (in.fraction.ll < ((fractype)1 << (FRACBITS + NGARDS)))
++ {
++ in.fraction.ll <<= 1;
++ in.normal_exp -= 1;
++ }
++ }
++ return pack_d (&in);
++}
++#endif /* L_si_to_sf || L_si_to_df */
++
++#if defined(L_usi_to_sf) || defined(L_usi_to_df) || defined(L_usi_to_tf)
++FLO_type
++usi_to_float (USItype arg_a)
++{
++ fp_number_type in;
++
++ in.sign = 0;
++ if (!arg_a)
++ {
++ in.class = CLASS_ZERO;
++ }
++ else
++ {
++ in.class = CLASS_NUMBER;
++ in.normal_exp = FRACBITS + NGARDS;
++ in.fraction.ll = arg_a;
++
++ while (in.fraction.ll > ((fractype)1 << (FRACBITS + NGARDS)))
++ {
++ in.fraction.ll >>= 1;
++ in.normal_exp += 1;
++ }
++ while (in.fraction.ll < ((fractype)1 << (FRACBITS + NGARDS)))
++ {
++ in.fraction.ll <<= 1;
++ in.normal_exp -= 1;
++ }
++ }
++ return pack_d (&in);
++}
++#endif
++
++#if defined(L_sf_to_si) || defined(L_df_to_si) || defined(L_tf_to_si)
++SItype
++float_to_si (FLO_type arg_a)
++{
++ fp_number_type a;
++ SItype tmp;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &a);
++
++ if (iszero (&a))
++ return 0;
++ if (isnan (&a))
++ return 0;
++ /* get reasonable MAX_SI_INT... */
++ if (isinf (&a))
++ return a.sign ? (-MAX_SI_INT)-1 : MAX_SI_INT;
++ /* it is a number, but a small one */
++ if (a.normal_exp < 0)
++ return 0;
++ if (a.normal_exp > BITS_PER_SI - 2)
++ return a.sign ? (-MAX_SI_INT)-1 : MAX_SI_INT;
++ tmp = a.fraction.ll >> ((FRACBITS + NGARDS) - a.normal_exp);
++ return a.sign ? (-tmp) : (tmp);
++}
++#endif /* L_sf_to_si || L_df_to_si */
++
++#if defined(L_sf_to_usi) || defined(L_df_to_usi) || defined(L_tf_to_usi)
++#if defined US_SOFTWARE_GOFAST || defined(L_tf_to_usi)
++/* While libgcc2.c defines its own __fixunssfsi and __fixunsdfsi routines,
++ we also define them for GOFAST because the ones in libgcc2.c have the
++ wrong names and I'd rather define these here and keep GOFAST CYG-LOC's
++ out of libgcc2.c. We can't define these here if not GOFAST because then
++ there'd be duplicate copies. */
++
++USItype
++float_to_usi (FLO_type arg_a)
++{
++ fp_number_type a;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &a);
++
++ if (iszero (&a))
++ return 0;
++ if (isnan (&a))
++ return 0;
++ /* it is a negative number */
++ if (a.sign)
++ return 0;
++ /* get reasonable MAX_USI_INT... */
++ if (isinf (&a))
++ return MAX_USI_INT;
++ /* it is a number, but a small one */
++ if (a.normal_exp < 0)
++ return 0;
++ if (a.normal_exp > BITS_PER_SI - 1)
++ return MAX_USI_INT;
++ else if (a.normal_exp > (FRACBITS + NGARDS))
++ return a.fraction.ll << (a.normal_exp - (FRACBITS + NGARDS));
++ else
++ return a.fraction.ll >> ((FRACBITS + NGARDS) - a.normal_exp);
++}
++#endif /* US_SOFTWARE_GOFAST */
++#endif /* L_sf_to_usi || L_df_to_usi */
++
++#if defined(L_negate_sf) || defined(L_negate_df) || defined(L_negate_tf)
++FLO_type
++negate (FLO_type arg_a)
++{
++ fp_number_type a;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &a);
++
++ flip_sign (&a);
++ return pack_d (&a);
++}
++#endif /* L_negate_sf || L_negate_df */
++
++#ifdef FLOAT
++
++#if defined(L_make_sf)
++SFtype
++__make_fp(fp_class_type class,
++ unsigned int sign,
++ int exp,
++ USItype frac)
++{
++ fp_number_type in;
++
++ in.class = class;
++ in.sign = sign;
++ in.normal_exp = exp;
++ in.fraction.ll = frac;
++ return pack_d (&in);
++}
++#endif /* L_make_sf */
++
++#ifndef FLOAT_ONLY
++
++/* This enables one to build an fp library that supports float but not double.
++ Otherwise, we would get an undefined reference to __make_dp.
++ This is needed for some 8-bit ports that can't handle well values that
++ are 8-bytes in size, so we just don't support double for them at all. */
++
++#if defined(L_sf_to_df)
++DFtype
++sf_to_df (SFtype arg_a)
++{
++ fp_number_type in;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &in);
++
++ return __make_dp (in.class, in.sign, in.normal_exp,
++ ((UDItype) in.fraction.ll) << F_D_BITOFF);
++}
++#endif /* L_sf_to_df */
++
++#if defined(L_sf_to_tf) && defined(TMODES)
++TFtype
++sf_to_tf (SFtype arg_a)
++{
++ fp_number_type in;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &in);
++
++ return __make_tp (in.class, in.sign, in.normal_exp,
++ ((UTItype) in.fraction.ll) << F_T_BITOFF);
++}
++#endif /* L_sf_to_df */
++
++#endif /* ! FLOAT_ONLY */
++#endif /* FLOAT */
++
++#ifndef FLOAT
++
++extern SFtype __make_fp (fp_class_type, unsigned int, int, USItype);
++
++#if defined(L_make_df)
++DFtype
++__make_dp (fp_class_type class, unsigned int sign, int exp, UDItype frac)
++{
++ fp_number_type in;
++
++ in.class = class;
++ in.sign = sign;
++ in.normal_exp = exp;
++ in.fraction.ll = frac;
++ return pack_d (&in);
++}
++#endif /* L_make_df */
++
++#if defined(L_df_to_sf)
++SFtype
++df_to_sf (DFtype arg_a)
++{
++ fp_number_type in;
++ USItype sffrac;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &in);
++
++ sffrac = in.fraction.ll >> F_D_BITOFF;
++
++ /* We set the lowest guard bit in SFFRAC if we discarded any non
++ zero bits. */
++ if ((in.fraction.ll & (((USItype) 1 << F_D_BITOFF) - 1)) != 0)
++ sffrac |= 1;
++
++ return __make_fp (in.class, in.sign, in.normal_exp, sffrac);
++}
++#endif /* L_df_to_sf */
++
++#if defined(L_df_to_tf) && defined(TMODES) \
++ && !defined(FLOAT) && !defined(TFLOAT)
++TFtype
++df_to_tf (DFtype arg_a)
++{
++ fp_number_type in;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &in);
++
++ return __make_tp (in.class, in.sign, in.normal_exp,
++ ((UTItype) in.fraction.ll) << D_T_BITOFF);
++}
++#endif /* L_sf_to_df */
++
++#ifdef TFLOAT
++#if defined(L_make_tf)
++TFtype
++__make_tp(fp_class_type class,
++ unsigned int sign,
++ int exp,
++ UTItype frac)
++{
++ fp_number_type in;
++
++ in.class = class;
++ in.sign = sign;
++ in.normal_exp = exp;
++ in.fraction.ll = frac;
++ return pack_d (&in);
++}
++#endif /* L_make_tf */
++
++#if defined(L_tf_to_df)
++DFtype
++tf_to_df (TFtype arg_a)
++{
++ fp_number_type in;
++ UDItype sffrac;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &in);
++
++ sffrac = in.fraction.ll >> D_T_BITOFF;
++
++ /* We set the lowest guard bit in SFFRAC if we discarded any non
++ zero bits. */
++ if ((in.fraction.ll & (((UTItype) 1 << D_T_BITOFF) - 1)) != 0)
++ sffrac |= 1;
++
++ return __make_dp (in.class, in.sign, in.normal_exp, sffrac);
++}
++#endif /* L_tf_to_df */
++
++#if defined(L_tf_to_sf)
++SFtype
++tf_to_sf (TFtype arg_a)
++{
++ fp_number_type in;
++ USItype sffrac;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &in);
++
++ sffrac = in.fraction.ll >> F_T_BITOFF;
++
++ /* We set the lowest guard bit in SFFRAC if we discarded any non
++ zero bits. */
++ if ((in.fraction.ll & (((UTItype) 1 << F_T_BITOFF) - 1)) != 0)
++ sffrac |= 1;
++
++ return __make_fp (in.class, in.sign, in.normal_exp, sffrac);
++}
++#endif /* L_tf_to_sf */
++#endif /* TFLOAT */
++
++#endif /* ! FLOAT */
++#endif /* !EXTENDED_FLOAT_STUBS */
+--- ./gcc/gcc/config/nios2/nios2-fp-bit.c
++++ ./gcc/gcc/config/nios2/nios2-fp-bit.c
+@@ -0,0 +1,1652 @@
++#define FLOAT
++/* This is a software floating point library which can be used
++ for targets without hardware floating point.
++ Copyright (C) 1994, 1995, 1996, 1997, 1998, 2000, 2001, 2002, 2003, 2004
++ Free Software Foundation, Inc.
++
++This file is free software; you can redistribute it and/or modify it
++under the terms of the GNU General Public License as published by the
++Free Software Foundation; either version 2, or (at your option) any
++later version.
++
++In addition to the permissions in the GNU General Public License, the
++Free Software Foundation gives you unlimited permission to link the
++compiled version of this file with other programs, and to distribute
++those programs without any restriction coming from the use of this
++file. (The General Public License restrictions do apply in other
++respects; for example, they cover modification of the file, and
++distribution when not linked into another program.)
++
++This file is distributed in the hope that it will be useful, but
++WITHOUT ANY WARRANTY; without even the implied warranty of
++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++General Public License for more details.
++
++You should have received a copy of the GNU General Public License
++along with this program; see the file COPYING. If not, write to
++the Free Software Foundation, 59 Temple Place - Suite 330,
++Boston, MA 02111-1307, USA. */
++
++/* As a special exception, if you link this library with other files,
++ some of which are compiled with GCC, to produce an executable,
++ this library does not by itself cause the resulting executable
++ to be covered by the GNU General Public License.
++ This exception does not however invalidate any other reasons why
++ the executable file might be covered by the GNU General Public License. */
++
++/* This implements IEEE 754 format arithmetic, but does not provide a
++ mechanism for setting the rounding mode, or for generating or handling
++ exceptions.
++
++ The original code by Steve Chamberlain, hacked by Mark Eichin and Jim
++ Wilson, all of Cygnus Support. */
++
++/* The intended way to use this file is to make two copies, add `#define FLOAT'
++ to one copy, then compile both copies and add them to libgcc.a. */
++
++#include "tconfig.h"
++#include "coretypes.h"
++#include "tm.h"
++#include "config/fp-bit.h"
++
++/* The following macros can be defined to change the behavior of this file:
++ FLOAT: Implement a `float', aka SFmode, fp library. If this is not
++ defined, then this file implements a `double', aka DFmode, fp library.
++ FLOAT_ONLY: Used with FLOAT, to implement a `float' only library, i.e.
++ don't include float->double conversion which requires the double library.
++ This is useful only for machines which can't support doubles, e.g. some
++ 8-bit processors.
++ CMPtype: Specify the type that floating point compares should return.
++ This defaults to SItype, aka int.
++ US_SOFTWARE_GOFAST: This makes all entry points use the same names as the
++ US Software goFast library.
++ _DEBUG_BITFLOAT: This makes debugging the code a little easier, by adding
++ two integers to the FLO_union_type.
++ NO_DENORMALS: Disable handling of denormals.
++ NO_NANS: Disable nan and infinity handling
++ SMALL_MACHINE: Useful when operations on QIs and HIs are faster
++ than on an SI */
++
++/* We don't currently support extended floats (long doubles) on machines
++ without hardware to deal with them.
++
++ These stubs are just to keep the linker from complaining about unresolved
++ references which can be pulled in from libio & libstdc++, even if the
++ user isn't using long doubles. However, they may generate an unresolved
++ external to abort if abort is not used by the function, and the stubs
++ are referenced from within libc, since libgcc goes before and after the
++ system library. */
++
++#ifdef DECLARE_LIBRARY_RENAMES
++ DECLARE_LIBRARY_RENAMES
++#endif
++
++#ifdef EXTENDED_FLOAT_STUBS
++extern void abort (void);
++void __extendsfxf2 (void) { abort(); }
++void __extenddfxf2 (void) { abort(); }
++void __truncxfdf2 (void) { abort(); }
++void __truncxfsf2 (void) { abort(); }
++void __fixxfsi (void) { abort(); }
++void __floatsixf (void) { abort(); }
++void __addxf3 (void) { abort(); }
++void __subxf3 (void) { abort(); }
++void __mulxf3 (void) { abort(); }
++void __divxf3 (void) { abort(); }
++void __negxf2 (void) { abort(); }
++void __eqxf2 (void) { abort(); }
++void __nexf2 (void) { abort(); }
++void __gtxf2 (void) { abort(); }
++void __gexf2 (void) { abort(); }
++void __lexf2 (void) { abort(); }
++void __ltxf2 (void) { abort(); }
++
++void __extendsftf2 (void) { abort(); }
++void __extenddftf2 (void) { abort(); }
++void __trunctfdf2 (void) { abort(); }
++void __trunctfsf2 (void) { abort(); }
++void __fixtfsi (void) { abort(); }
++void __floatsitf (void) { abort(); }
++void __addtf3 (void) { abort(); }
++void __subtf3 (void) { abort(); }
++void __multf3 (void) { abort(); }
++void __divtf3 (void) { abort(); }
++void __negtf2 (void) { abort(); }
++void __eqtf2 (void) { abort(); }
++void __netf2 (void) { abort(); }
++void __gttf2 (void) { abort(); }
++void __getf2 (void) { abort(); }
++void __letf2 (void) { abort(); }
++void __lttf2 (void) { abort(); }
++#else /* !EXTENDED_FLOAT_STUBS, rest of file */
++
++/* IEEE "special" number predicates */
++
++#ifdef NO_NANS
++
++#define nan() 0
++#define isnan(x) 0
++#define isinf(x) 0
++#else
++
++#if defined L_thenan_sf
++const fp_number_type __thenan_sf = { CLASS_SNAN, 0, 0, {(fractype) 0} };
++#elif defined L_thenan_df
++const fp_number_type __thenan_df = { CLASS_SNAN, 0, 0, {(fractype) 0} };
++#elif defined L_thenan_tf
++const fp_number_type __thenan_tf = { CLASS_SNAN, 0, 0, {(fractype) 0} };
++#elif defined TFLOAT
++extern const fp_number_type __thenan_tf;
++#elif defined FLOAT
++extern const fp_number_type __thenan_sf;
++#else
++extern const fp_number_type __thenan_df;
++#endif
++
++INLINE
++static fp_number_type *
++nan (void)
++{
++ /* Discard the const qualifier... */
++#ifdef TFLOAT
++ return (fp_number_type *) (& __thenan_tf);
++#elif defined FLOAT
++ return (fp_number_type *) (& __thenan_sf);
++#else
++ return (fp_number_type *) (& __thenan_df);
++#endif
++}
++
++INLINE
++static int
++isnan ( fp_number_type * x)
++{
++ return x->class == CLASS_SNAN || x->class == CLASS_QNAN;
++}
++
++INLINE
++static int
++isinf ( fp_number_type * x)
++{
++ return x->class == CLASS_INFINITY;
++}
++
++#endif /* NO_NANS */
++
++INLINE
++static int
++iszero ( fp_number_type * x)
++{
++ return x->class == CLASS_ZERO;
++}
++
++INLINE
++static void
++flip_sign ( fp_number_type * x)
++{
++ x->sign = !x->sign;
++}
++
++extern FLO_type pack_d ( fp_number_type * );
++
++#if defined(L_pack_df) || defined(L_pack_sf) || defined(L_pack_tf)
++FLO_type
++pack_d ( fp_number_type * src)
++{
++ FLO_union_type dst;
++ fractype fraction = src->fraction.ll; /* wasn't unsigned before? */
++ int sign = src->sign;
++ int exp = 0;
++
++ if (LARGEST_EXPONENT_IS_NORMAL (FRAC_NBITS) && (isnan (src) || isinf (src)))
++ {
++ /* We can't represent these values accurately. By using the
++ largest possible magnitude, we guarantee that the conversion
++ of infinity is at least as big as any finite number. */
++ exp = EXPMAX;
++ fraction = ((fractype) 1 << FRACBITS) - 1;
++ }
++ else if (isnan (src))
++ {
++ exp = EXPMAX;
++ if (src->class == CLASS_QNAN || 1)
++ {
++#ifdef QUIET_NAN_NEGATED
++ fraction |= QUIET_NAN - 1;
++#else
++ fraction |= QUIET_NAN;
++#endif
++ }
++ }
++ else if (isinf (src))
++ {
++ exp = EXPMAX;
++ fraction = 0;
++ }
++ else if (iszero (src))
++ {
++ exp = 0;
++ fraction = 0;
++ }
++ else if (fraction == 0)
++ {
++ exp = 0;
++ }
++ else
++ {
++ if (src->normal_exp < NORMAL_EXPMIN)
++ {
++#ifdef NO_DENORMALS
++ /* Go straight to a zero representation if denormals are not
++ supported. The denormal handling would be harmless but
++ isn't unnecessary. */
++ exp = 0;
++ fraction = 0;
++#else /* NO_DENORMALS */
++ /* This number's exponent is too low to fit into the bits
++ available in the number, so we'll store 0 in the exponent and
++ shift the fraction to the right to make up for it. */
++
++ int shift = NORMAL_EXPMIN - src->normal_exp;
++
++ exp = 0;
++
++ if (shift > FRAC_NBITS - NGARDS)
++ {
++ /* No point shifting, since it's more that 64 out. */
++ fraction = 0;
++ }
++ else
++ {
++ int lowbit = (fraction & (((fractype)1 << shift) - 1)) ? 1 : 0;
++ fraction = (fraction >> shift) | lowbit;
++ }
++ if ((fraction & GARDMASK) == GARDMSB)
++ {
++ if ((fraction & (1 << NGARDS)))
++ fraction += GARDROUND + 1;
++ }
++ else
++ {
++ /* Add to the guards to round up. */
++ fraction += GARDROUND;
++ }
++ /* Perhaps the rounding means we now need to change the
++ exponent, because the fraction is no longer denormal. */
++ if (fraction >= IMPLICIT_1)
++ {
++ exp += 1;
++ }
++ fraction >>= NGARDS;
++#endif /* NO_DENORMALS */
++ }
++ else if (!LARGEST_EXPONENT_IS_NORMAL (FRAC_NBITS)
++ && src->normal_exp > EXPBIAS)
++ {
++ exp = EXPMAX;
++ fraction = 0;
++ }
++ else
++ {
++ exp = src->normal_exp + EXPBIAS;
++ if (!ROUND_TOWARDS_ZERO)
++ {
++ /* IF the gard bits are the all zero, but the first, then we're
++ half way between two numbers, choose the one which makes the
++ lsb of the answer 0. */
++ if ((fraction & GARDMASK) == GARDMSB)
++ {
++ if (fraction & (1 << NGARDS))
++ fraction += GARDROUND + 1;
++ }
++ else
++ {
++ /* Add a one to the guards to round up */
++ fraction += GARDROUND;
++ }
++ if (fraction >= IMPLICIT_2)
++ {
++ fraction >>= 1;
++ exp += 1;
++ }
++ }
++ fraction >>= NGARDS;
++
++ if (LARGEST_EXPONENT_IS_NORMAL (FRAC_NBITS) && exp > EXPMAX)
++ {
++ /* Saturate on overflow. */
++ exp = EXPMAX;
++ fraction = ((fractype) 1 << FRACBITS) - 1;
++ }
++ }
++ }
++
++ /* We previously used bitfields to store the number, but this doesn't
++ handle little/big endian systems conveniently, so use shifts and
++ masks */
++#ifdef FLOAT_BIT_ORDER_MISMATCH
++ dst.bits.fraction = fraction;
++ dst.bits.exp = exp;
++ dst.bits.sign = sign;
++#else
++# if defined TFLOAT && defined HALFFRACBITS
++ {
++ halffractype high, low, unity;
++ int lowsign, lowexp;
++
++ unity = (halffractype) 1 << HALFFRACBITS;
++
++ /* Set HIGH to the high double's significand, masking out the implicit 1.
++ Set LOW to the low double's full significand. */
++ high = (fraction >> (FRACBITS - HALFFRACBITS)) & (unity - 1);
++ low = fraction & (unity * 2 - 1);
++
++ /* Get the initial sign and exponent of the low double. */
++ lowexp = exp - HALFFRACBITS - 1;
++ lowsign = sign;
++
++ /* HIGH should be rounded like a normal double, making |LOW| <=
++ 0.5 ULP of HIGH. Assume round-to-nearest. */
++ if (exp < EXPMAX)
++ if (low > unity || (low == unity && (high & 1) == 1))
++ {
++ /* Round HIGH up and adjust LOW to match. */
++ high++;
++ if (high == unity)
++ {
++ /* May make it infinite, but that's OK. */
++ high = 0;
++ exp++;
++ }
++ low = unity * 2 - low;
++ lowsign ^= 1;
++ }
++
++ high |= (halffractype) exp << HALFFRACBITS;
++ high |= (halffractype) sign << (HALFFRACBITS + EXPBITS);
++
++ if (exp == EXPMAX || exp == 0 || low == 0)
++ low = 0;
++ else
++ {
++ while (lowexp > 0 && low < unity)
++ {
++ low <<= 1;
++ lowexp--;
++ }
++
++ if (lowexp <= 0)
++ {
++ halffractype roundmsb, round;
++ int shift;
++
++ shift = 1 - lowexp;
++ roundmsb = (1 << (shift - 1));
++ round = low & ((roundmsb << 1) - 1);
++
++ low >>= shift;
++ lowexp = 0;
++
++ if (round > roundmsb || (round == roundmsb && (low & 1) == 1))
++ {
++ low++;
++ if (low == unity)
++ /* LOW rounds up to the smallest normal number. */
++ lowexp++;
++ }
++ }
++
++ low &= unity - 1;
++ low |= (halffractype) lowexp << HALFFRACBITS;
++ low |= (halffractype) lowsign << (HALFFRACBITS + EXPBITS);
++ }
++ dst.value_raw = ((fractype) high << HALFSHIFT) | low;
++ }
++# else
++ dst.value_raw = fraction & ((((fractype)1) << FRACBITS) - (fractype)1);
++ dst.value_raw |= ((fractype) (exp & ((1 << EXPBITS) - 1))) << FRACBITS;
++ dst.value_raw |= ((fractype) (sign & 1)) << (FRACBITS | EXPBITS);
++# endif
++#endif
++
++#if defined(FLOAT_WORD_ORDER_MISMATCH) && !defined(FLOAT)
++#ifdef TFLOAT
++ {
++ qrtrfractype tmp1 = dst.words[0];
++ qrtrfractype tmp2 = dst.words[1];
++ dst.words[0] = dst.words[3];
++ dst.words[1] = dst.words[2];
++ dst.words[2] = tmp2;
++ dst.words[3] = tmp1;
++ }
++#else
++ {
++ halffractype tmp = dst.words[0];
++ dst.words[0] = dst.words[1];
++ dst.words[1] = tmp;
++ }
++#endif
++#endif
++
++ return dst.value;
++}
++#endif
++
++#if defined(L_unpack_df) || defined(L_unpack_sf) || defined(L_unpack_tf)
++void
++unpack_d (FLO_union_type * src, fp_number_type * dst)
++{
++ /* We previously used bitfields to store the number, but this doesn't
++ handle little/big endian systems conveniently, so use shifts and
++ masks */
++ fractype fraction;
++ int exp;
++ int sign;
++
++#if defined(FLOAT_WORD_ORDER_MISMATCH) && !defined(FLOAT)
++ FLO_union_type swapped;
++
++#ifdef TFLOAT
++ swapped.words[0] = src->words[3];
++ swapped.words[1] = src->words[2];
++ swapped.words[2] = src->words[1];
++ swapped.words[3] = src->words[0];
++#else
++ swapped.words[0] = src->words[1];
++ swapped.words[1] = src->words[0];
++#endif
++ src = &swapped;
++#endif
++
++#ifdef FLOAT_BIT_ORDER_MISMATCH
++ fraction = src->bits.fraction;
++ exp = src->bits.exp;
++ sign = src->bits.sign;
++#else
++# if defined TFLOAT && defined HALFFRACBITS
++ {
++ halffractype high, low;
++
++ high = src->value_raw >> HALFSHIFT;
++ low = src->value_raw & (((fractype)1 << HALFSHIFT) - 1);
++
++ fraction = high & ((((fractype)1) << HALFFRACBITS) - 1);
++ fraction <<= FRACBITS - HALFFRACBITS;
++ exp = ((int)(high >> HALFFRACBITS)) & ((1 << EXPBITS) - 1);
++ sign = ((int)(high >> (((HALFFRACBITS + EXPBITS))))) & 1;
++
++ if (exp != EXPMAX && exp != 0 && low != 0)
++ {
++ int lowexp = ((int)(low >> HALFFRACBITS)) & ((1 << EXPBITS) - 1);
++ int lowsign = ((int)(low >> (((HALFFRACBITS + EXPBITS))))) & 1;
++ int shift;
++ fractype xlow;
++
++ xlow = low & ((((fractype)1) << HALFFRACBITS) - 1);
++ if (lowexp)
++ xlow |= (((halffractype)1) << HALFFRACBITS);
++ else
++ lowexp = 1;
++ shift = (FRACBITS - HALFFRACBITS) - (exp - lowexp);
++ if (shift > 0)
++ xlow <<= shift;
++ else if (shift < 0)
++ xlow >>= -shift;
++ if (sign == lowsign)
++ fraction += xlow;
++ else if (fraction >= xlow)
++ fraction -= xlow;
++ else
++ {
++ /* The high part is a power of two but the full number is lower.
++ This code will leave the implicit 1 in FRACTION, but we'd
++ have added that below anyway. */
++ fraction = (((fractype) 1 << FRACBITS) - xlow) << 1;
++ exp--;
++ }
++ }
++ }
++# else
++ fraction = src->value_raw & ((((fractype)1) << FRACBITS) - 1);
++ exp = ((int)(src->value_raw >> FRACBITS)) & ((1 << EXPBITS) - 1);
++ sign = ((int)(src->value_raw >> (FRACBITS + EXPBITS))) & 1;
++# endif
++#endif
++
++ dst->sign = sign;
++ if (exp == 0)
++ {
++ /* Hmm. Looks like 0 */
++ if (fraction == 0
++#ifdef NO_DENORMALS
++ || 1
++#endif
++ )
++ {
++ /* tastes like zero */
++ dst->class = CLASS_ZERO;
++ }
++ else
++ {
++ /* Zero exponent with nonzero fraction - it's denormalized,
++ so there isn't a leading implicit one - we'll shift it so
++ it gets one. */
++ dst->normal_exp = exp - EXPBIAS + 1;
++ fraction <<= NGARDS;
++
++ dst->class = CLASS_NUMBER;
++#if 1
++ while (fraction < IMPLICIT_1)
++ {
++ fraction <<= 1;
++ dst->normal_exp--;
++ }
++#endif
++ dst->fraction.ll = fraction;
++ }
++ }
++ else if (!LARGEST_EXPONENT_IS_NORMAL (FRAC_NBITS) && exp == EXPMAX)
++ {
++ /* Huge exponent*/
++ if (fraction == 0)
++ {
++ /* Attached to a zero fraction - means infinity */
++ dst->class = CLASS_INFINITY;
++ }
++ else
++ {
++ /* Nonzero fraction, means nan */
++#ifdef QUIET_NAN_NEGATED
++ if ((fraction & QUIET_NAN) == 0)
++#else
++ if (fraction & QUIET_NAN)
++#endif
++ {
++ dst->class = CLASS_QNAN;
++ }
++ else
++ {
++ dst->class = CLASS_SNAN;
++ }
++ /* Keep the fraction part as the nan number */
++ dst->fraction.ll = fraction;
++ }
++ }
++ else
++ {
++ /* Nothing strange about this number */
++ dst->normal_exp = exp - EXPBIAS;
++ dst->class = CLASS_NUMBER;
++ dst->fraction.ll = (fraction << NGARDS) | IMPLICIT_1;
++ }
++}
++#endif /* L_unpack_df || L_unpack_sf */
++
++#if defined(L_addsub_sf) || defined(L_addsub_df) || defined(L_addsub_tf)
++static fp_number_type *
++_fpadd_parts (fp_number_type * a,
++ fp_number_type * b,
++ fp_number_type * tmp)
++{
++ intfrac tfraction;
++
++ /* Put commonly used fields in local variables. */
++ int a_normal_exp;
++ int b_normal_exp;
++ fractype a_fraction;
++ fractype b_fraction;
++
++ if (isnan (a))
++ {
++ return a;
++ }
++ if (isnan (b))
++ {
++ return b;
++ }
++ if (isinf (a))
++ {
++ /* Adding infinities with opposite signs yields a NaN. */
++ if (isinf (b) && a->sign != b->sign)
++ return nan ();
++ return a;
++ }
++ if (isinf (b))
++ {
++ return b;
++ }
++ if (iszero (b))
++ {
++ if (iszero (a))
++ {
++ *tmp = *a;
++ tmp->sign = a->sign & b->sign;
++ return tmp;
++ }
++ return a;
++ }
++ if (iszero (a))
++ {
++ return b;
++ }
++
++ /* Got two numbers. shift the smaller and increment the exponent till
++ they're the same */
++ {
++ int diff;
++
++ a_normal_exp = a->normal_exp;
++ b_normal_exp = b->normal_exp;
++ a_fraction = a->fraction.ll;
++ b_fraction = b->fraction.ll;
++
++ diff = a_normal_exp - b_normal_exp;
++
++ if (diff < 0)
++ diff = -diff;
++ if (diff < FRAC_NBITS)
++ {
++ /* ??? This does shifts one bit at a time. Optimize. */
++ while (a_normal_exp > b_normal_exp)
++ {
++ b_normal_exp++;
++ LSHIFT (b_fraction);
++ }
++ while (b_normal_exp > a_normal_exp)
++ {
++ a_normal_exp++;
++ LSHIFT (a_fraction);
++ }
++ }
++ else
++ {
++ /* Somethings's up.. choose the biggest */
++ if (a_normal_exp > b_normal_exp)
++ {
++ b_normal_exp = a_normal_exp;
++ b_fraction = 0;
++ }
++ else
++ {
++ a_normal_exp = b_normal_exp;
++ a_fraction = 0;
++ }
++ }
++ }
++
++ if (a->sign != b->sign)
++ {
++ if (a->sign)
++ {
++ tfraction = -a_fraction + b_fraction;
++ }
++ else
++ {
++ tfraction = a_fraction - b_fraction;
++ }
++ if (tfraction >= 0)
++ {
++ tmp->sign = 0;
++ tmp->normal_exp = a_normal_exp;
++ tmp->fraction.ll = tfraction;
++ }
++ else
++ {
++ tmp->sign = 1;
++ tmp->normal_exp = a_normal_exp;
++ tmp->fraction.ll = -tfraction;
++ }
++ /* and renormalize it */
++
++ while (tmp->fraction.ll < IMPLICIT_1 && tmp->fraction.ll)
++ {
++ tmp->fraction.ll <<= 1;
++ tmp->normal_exp--;
++ }
++ }
++ else
++ {
++ tmp->sign = a->sign;
++ tmp->normal_exp = a_normal_exp;
++ tmp->fraction.ll = a_fraction + b_fraction;
++ }
++ tmp->class = CLASS_NUMBER;
++ /* Now the fraction is added, we have to shift down to renormalize the
++ number */
++
++ if (tmp->fraction.ll >= IMPLICIT_2)
++ {
++ LSHIFT (tmp->fraction.ll);
++ tmp->normal_exp++;
++ }
++ return tmp;
++
++}
++
++FLO_type
++add (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ fp_number_type tmp;
++ fp_number_type *res;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ res = _fpadd_parts (&a, &b, &tmp);
++
++ return pack_d (res);
++}
++
++FLO_type
++sub (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ fp_number_type tmp;
++ fp_number_type *res;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ b.sign ^= 1;
++
++ res = _fpadd_parts (&a, &b, &tmp);
++
++ return pack_d (res);
++}
++#endif /* L_addsub_sf || L_addsub_df */
++
++#if defined(L_mul_sf) || defined(L_mul_df) || defined(L_mul_tf)
++static inline __attribute__ ((__always_inline__)) fp_number_type *
++_fpmul_parts ( fp_number_type * a,
++ fp_number_type * b,
++ fp_number_type * tmp)
++{
++ fractype low = 0;
++ fractype high = 0;
++
++ if (isnan (a))
++ {
++ a->sign = a->sign != b->sign;
++ return a;
++ }
++ if (isnan (b))
++ {
++ b->sign = a->sign != b->sign;
++ return b;
++ }
++ if (isinf (a))
++ {
++ if (iszero (b))
++ return nan ();
++ a->sign = a->sign != b->sign;
++ return a;
++ }
++ if (isinf (b))
++ {
++ if (iszero (a))
++ {
++ return nan ();
++ }
++ b->sign = a->sign != b->sign;
++ return b;
++ }
++ if (iszero (a))
++ {
++ a->sign = a->sign != b->sign;
++ return a;
++ }
++ if (iszero (b))
++ {
++ b->sign = a->sign != b->sign;
++ return b;
++ }
++
++ /* Calculate the mantissa by multiplying both numbers to get a
++ twice-as-wide number. */
++ {
++#if defined(NO_DI_MODE) || defined(TFLOAT)
++ {
++ fractype x = a->fraction.ll;
++ fractype ylow = b->fraction.ll;
++ fractype yhigh = 0;
++ int bit;
++
++ /* ??? This does multiplies one bit at a time. Optimize. */
++ for (bit = 0; bit < FRAC_NBITS; bit++)
++ {
++ int carry;
++
++ if (x & 1)
++ {
++ carry = (low += ylow) < ylow;
++ high += yhigh + carry;
++ }
++ yhigh <<= 1;
++ if (ylow & FRACHIGH)
++ {
++ yhigh |= 1;
++ }
++ ylow <<= 1;
++ x >>= 1;
++ }
++ }
++#elif defined(FLOAT)
++ /* Multiplying two USIs to get a UDI, we're safe. */
++ {
++ UDItype answer = (UDItype)a->fraction.ll * (UDItype)b->fraction.ll;
++
++ high = answer >> BITS_PER_SI;
++ low = answer;
++ }
++#else
++ /* fractype is DImode, but we need the result to be twice as wide.
++ Assuming a widening multiply from DImode to TImode is not
++ available, build one by hand. */
++ {
++ USItype nl = a->fraction.ll;
++ USItype nh = a->fraction.ll >> BITS_PER_SI;
++ USItype ml = b->fraction.ll;
++ USItype mh = b->fraction.ll >> BITS_PER_SI;
++ UDItype pp_ll = (UDItype) ml * nl;
++ UDItype pp_hl = (UDItype) mh * nl;
++ UDItype pp_lh = (UDItype) ml * nh;
++ UDItype pp_hh = (UDItype) mh * nh;
++ UDItype res2 = 0;
++ UDItype res0 = 0;
++ UDItype ps_hh__ = pp_hl + pp_lh;
++ if (ps_hh__ < pp_hl)
++ res2 += (UDItype)1 << BITS_PER_SI;
++ pp_hl = (UDItype)(USItype)ps_hh__ << BITS_PER_SI;
++ res0 = pp_ll + pp_hl;
++ if (res0 < pp_ll)
++ res2++;
++ res2 += (ps_hh__ >> BITS_PER_SI) + pp_hh;
++ high = res2;
++ low = res0;
++ }
++#endif
++ }
++
++ tmp->normal_exp = a->normal_exp + b->normal_exp
++ + FRAC_NBITS - (FRACBITS + NGARDS);
++ tmp->sign = a->sign != b->sign;
++ while (high >= IMPLICIT_2)
++ {
++ tmp->normal_exp++;
++ if (high & 1)
++ {
++ low >>= 1;
++ low |= FRACHIGH;
++ }
++ high >>= 1;
++ }
++ while (high < IMPLICIT_1)
++ {
++ tmp->normal_exp--;
++
++ high <<= 1;
++ if (low & FRACHIGH)
++ high |= 1;
++ low <<= 1;
++ }
++ /* rounding is tricky. if we only round if it won't make us round later. */
++#if 0
++ if (low & FRACHIGH2)
++ {
++ if (((high & GARDMASK) != GARDMSB)
++ && (((high + 1) & GARDMASK) == GARDMSB))
++ {
++ /* don't round, it gets done again later. */
++ }
++ else
++ {
++ high++;
++ }
++ }
++#endif
++ if (!ROUND_TOWARDS_ZERO && (high & GARDMASK) == GARDMSB)
++ {
++ if (high & (1 << NGARDS))
++ {
++ /* half way, so round to even */
++ high += GARDROUND + 1;
++ }
++ else if (low)
++ {
++ /* but we really weren't half way */
++ high += GARDROUND + 1;
++ }
++ }
++ tmp->fraction.ll = high;
++ tmp->class = CLASS_NUMBER;
++ return tmp;
++}
++
++FLO_type
++multiply (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ fp_number_type tmp;
++ fp_number_type *res;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ res = _fpmul_parts (&a, &b, &tmp);
++
++ return pack_d (res);
++}
++#endif /* L_mul_sf || L_mul_df */
++
++#if defined(L_div_sf) || defined(L_div_df) || defined(L_div_tf)
++static inline __attribute__ ((__always_inline__)) fp_number_type *
++_fpdiv_parts (fp_number_type * a,
++ fp_number_type * b)
++{
++ fractype bit;
++ fractype numerator;
++ fractype denominator;
++ fractype quotient;
++
++ if (isnan (a))
++ {
++ return a;
++ }
++ if (isnan (b))
++ {
++ return b;
++ }
++
++ a->sign = a->sign ^ b->sign;
++
++ if (isinf (a) || iszero (a))
++ {
++ if (a->class == b->class)
++ return nan ();
++ return a;
++ }
++
++ if (isinf (b))
++ {
++ a->fraction.ll = 0;
++ a->normal_exp = 0;
++ return a;
++ }
++ if (iszero (b))
++ {
++ a->class = CLASS_INFINITY;
++ return a;
++ }
++
++ /* Calculate the mantissa by multiplying both 64bit numbers to get a
++ 128 bit number */
++ {
++ /* quotient =
++ ( numerator / denominator) * 2^(numerator exponent - denominator exponent)
++ */
++
++ a->normal_exp = a->normal_exp - b->normal_exp;
++ numerator = a->fraction.ll;
++ denominator = b->fraction.ll;
++
++ if (numerator < denominator)
++ {
++ /* Fraction will be less than 1.0 */
++ numerator *= 2;
++ a->normal_exp--;
++ }
++ bit = IMPLICIT_1;
++ quotient = 0;
++ /* ??? Does divide one bit at a time. Optimize. */
++ while (bit)
++ {
++ if (numerator >= denominator)
++ {
++ quotient |= bit;
++ numerator -= denominator;
++ }
++ bit >>= 1;
++ numerator *= 2;
++ }
++
++ if (!ROUND_TOWARDS_ZERO && (quotient & GARDMASK) == GARDMSB)
++ {
++ if (quotient & (1 << NGARDS))
++ {
++ /* half way, so round to even */
++ quotient += GARDROUND + 1;
++ }
++ else if (numerator)
++ {
++ /* but we really weren't half way, more bits exist */
++ quotient += GARDROUND + 1;
++ }
++ }
++
++ a->fraction.ll = quotient;
++ return (a);
++ }
++}
++
++FLO_type
++divide (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ fp_number_type *res;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ res = _fpdiv_parts (&a, &b);
++
++ return pack_d (res);
++}
++#endif /* L_div_sf || L_div_df */
++
++#if defined(L_fpcmp_parts_sf) || defined(L_fpcmp_parts_df) \
++ || defined(L_fpcmp_parts_tf)
++/* according to the demo, fpcmp returns a comparison with 0... thus
++ a<b -> -1
++ a==b -> 0
++ a>b -> +1
++ */
++
++int
++__fpcmp_parts (fp_number_type * a, fp_number_type * b)
++{
++#if 0
++ /* either nan -> unordered. Must be checked outside of this routine. */
++ if (isnan (a) && isnan (b))
++ {
++ return 1; /* still unordered! */
++ }
++#endif
++
++ if (isnan (a) || isnan (b))
++ {
++ return 1; /* how to indicate unordered compare? */
++ }
++ if (isinf (a) && isinf (b))
++ {
++ /* +inf > -inf, but +inf != +inf */
++ /* b \a| +inf(0)| -inf(1)
++ ______\+--------+--------
++ +inf(0)| a==b(0)| a<b(-1)
++ -------+--------+--------
++ -inf(1)| a>b(1) | a==b(0)
++ -------+--------+--------
++ So since unordered must be nonzero, just line up the columns...
++ */
++ return b->sign - a->sign;
++ }
++ /* but not both... */
++ if (isinf (a))
++ {
++ return a->sign ? -1 : 1;
++ }
++ if (isinf (b))
++ {
++ return b->sign ? 1 : -1;
++ }
++ if (iszero (a) && iszero (b))
++ {
++ return 0;
++ }
++ if (iszero (a))
++ {
++ return b->sign ? 1 : -1;
++ }
++ if (iszero (b))
++ {
++ return a->sign ? -1 : 1;
++ }
++ /* now both are "normal". */
++ if (a->sign != b->sign)
++ {
++ /* opposite signs */
++ return a->sign ? -1 : 1;
++ }
++ /* same sign; exponents? */
++ if (a->normal_exp > b->normal_exp)
++ {
++ return a->sign ? -1 : 1;
++ }
++ if (a->normal_exp < b->normal_exp)
++ {
++ return a->sign ? 1 : -1;
++ }
++ /* same exponents; check size. */
++ if (a->fraction.ll > b->fraction.ll)
++ {
++ return a->sign ? -1 : 1;
++ }
++ if (a->fraction.ll < b->fraction.ll)
++ {
++ return a->sign ? 1 : -1;
++ }
++ /* after all that, they're equal. */
++ return 0;
++}
++#endif
++
++#if defined(L_compare_sf) || defined(L_compare_df) || defined(L_compoare_tf)
++CMPtype
++compare (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ return __fpcmp_parts (&a, &b);
++}
++#endif /* L_compare_sf || L_compare_df */
++
++#ifndef US_SOFTWARE_GOFAST
++
++/* These should be optimized for their specific tasks someday. */
++
++#if defined(L_eq_sf) || defined(L_eq_df) || defined(L_eq_tf)
++CMPtype
++_eq_f2 (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ if (isnan (&a) || isnan (&b))
++ return 1; /* false, truth == 0 */
++
++ return __fpcmp_parts (&a, &b) ;
++}
++#endif /* L_eq_sf || L_eq_df */
++
++#if defined(L_ne_sf) || defined(L_ne_df) || defined(L_ne_tf)
++CMPtype
++_ne_f2 (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ if (isnan (&a) || isnan (&b))
++ return 1; /* true, truth != 0 */
++
++ return __fpcmp_parts (&a, &b) ;
++}
++#endif /* L_ne_sf || L_ne_df */
++
++#if defined(L_gt_sf) || defined(L_gt_df) || defined(L_gt_tf)
++CMPtype
++_gt_f2 (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ if (isnan (&a) || isnan (&b))
++ return -1; /* false, truth > 0 */
++
++ return __fpcmp_parts (&a, &b);
++}
++#endif /* L_gt_sf || L_gt_df */
++
++#if defined(L_ge_sf) || defined(L_ge_df) || defined(L_ge_tf)
++CMPtype
++_ge_f2 (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ if (isnan (&a) || isnan (&b))
++ return -1; /* false, truth >= 0 */
++ return __fpcmp_parts (&a, &b) ;
++}
++#endif /* L_ge_sf || L_ge_df */
++
++#if defined(L_lt_sf) || defined(L_lt_df) || defined(L_lt_tf)
++CMPtype
++_lt_f2 (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ if (isnan (&a) || isnan (&b))
++ return 1; /* false, truth < 0 */
++
++ return __fpcmp_parts (&a, &b);
++}
++#endif /* L_lt_sf || L_lt_df */
++
++#if defined(L_le_sf) || defined(L_le_df) || defined(L_le_tf)
++CMPtype
++_le_f2 (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ if (isnan (&a) || isnan (&b))
++ return 1; /* false, truth <= 0 */
++
++ return __fpcmp_parts (&a, &b) ;
++}
++#endif /* L_le_sf || L_le_df */
++
++#endif /* ! US_SOFTWARE_GOFAST */
++
++#if defined(L_unord_sf) || defined(L_unord_df) || defined(L_unord_tf)
++CMPtype
++_unord_f2 (FLO_type arg_a, FLO_type arg_b)
++{
++ fp_number_type a;
++ fp_number_type b;
++ FLO_union_type au, bu;
++
++ au.value = arg_a;
++ bu.value = arg_b;
++
++ unpack_d (&au, &a);
++ unpack_d (&bu, &b);
++
++ return (isnan (&a) || isnan (&b));
++}
++#endif /* L_unord_sf || L_unord_df */
++
++#if defined(L_si_to_sf) || defined(L_si_to_df) || defined(L_si_to_tf)
++FLO_type
++si_to_float (SItype arg_a)
++{
++ fp_number_type in;
++
++ in.class = CLASS_NUMBER;
++ in.sign = arg_a < 0;
++ if (!arg_a)
++ {
++ in.class = CLASS_ZERO;
++ }
++ else
++ {
++ in.normal_exp = FRACBITS + NGARDS;
++ if (in.sign)
++ {
++ /* Special case for minint, since there is no +ve integer
++ representation for it */
++ if (arg_a == (- MAX_SI_INT - 1))
++ {
++ return (FLO_type)(- MAX_SI_INT - 1);
++ }
++ in.fraction.ll = (-arg_a);
++ }
++ else
++ in.fraction.ll = arg_a;
++
++ while (in.fraction.ll < ((fractype)1 << (FRACBITS + NGARDS)))
++ {
++ in.fraction.ll <<= 1;
++ in.normal_exp -= 1;
++ }
++ }
++ return pack_d (&in);
++}
++#endif /* L_si_to_sf || L_si_to_df */
++
++#if defined(L_usi_to_sf) || defined(L_usi_to_df) || defined(L_usi_to_tf)
++FLO_type
++usi_to_float (USItype arg_a)
++{
++ fp_number_type in;
++
++ in.sign = 0;
++ if (!arg_a)
++ {
++ in.class = CLASS_ZERO;
++ }
++ else
++ {
++ in.class = CLASS_NUMBER;
++ in.normal_exp = FRACBITS + NGARDS;
++ in.fraction.ll = arg_a;
++
++ while (in.fraction.ll > ((fractype)1 << (FRACBITS + NGARDS)))
++ {
++ in.fraction.ll >>= 1;
++ in.normal_exp += 1;
++ }
++ while (in.fraction.ll < ((fractype)1 << (FRACBITS + NGARDS)))
++ {
++ in.fraction.ll <<= 1;
++ in.normal_exp -= 1;
++ }
++ }
++ return pack_d (&in);
++}
++#endif
++
++#if defined(L_sf_to_si) || defined(L_df_to_si) || defined(L_tf_to_si)
++SItype
++float_to_si (FLO_type arg_a)
++{
++ fp_number_type a;
++ SItype tmp;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &a);
++
++ if (iszero (&a))
++ return 0;
++ if (isnan (&a))
++ return 0;
++ /* get reasonable MAX_SI_INT... */
++ if (isinf (&a))
++ return a.sign ? (-MAX_SI_INT)-1 : MAX_SI_INT;
++ /* it is a number, but a small one */
++ if (a.normal_exp < 0)
++ return 0;
++ if (a.normal_exp > BITS_PER_SI - 2)
++ return a.sign ? (-MAX_SI_INT)-1 : MAX_SI_INT;
++ tmp = a.fraction.ll >> ((FRACBITS + NGARDS) - a.normal_exp);
++ return a.sign ? (-tmp) : (tmp);
++}
++#endif /* L_sf_to_si || L_df_to_si */
++
++#if defined(L_sf_to_usi) || defined(L_df_to_usi) || defined(L_tf_to_usi)
++#if defined US_SOFTWARE_GOFAST || defined(L_tf_to_usi)
++/* While libgcc2.c defines its own __fixunssfsi and __fixunsdfsi routines,
++ we also define them for GOFAST because the ones in libgcc2.c have the
++ wrong names and I'd rather define these here and keep GOFAST CYG-LOC's
++ out of libgcc2.c. We can't define these here if not GOFAST because then
++ there'd be duplicate copies. */
++
++USItype
++float_to_usi (FLO_type arg_a)
++{
++ fp_number_type a;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &a);
++
++ if (iszero (&a))
++ return 0;
++ if (isnan (&a))
++ return 0;
++ /* it is a negative number */
++ if (a.sign)
++ return 0;
++ /* get reasonable MAX_USI_INT... */
++ if (isinf (&a))
++ return MAX_USI_INT;
++ /* it is a number, but a small one */
++ if (a.normal_exp < 0)
++ return 0;
++ if (a.normal_exp > BITS_PER_SI - 1)
++ return MAX_USI_INT;
++ else if (a.normal_exp > (FRACBITS + NGARDS))
++ return a.fraction.ll << (a.normal_exp - (FRACBITS + NGARDS));
++ else
++ return a.fraction.ll >> ((FRACBITS + NGARDS) - a.normal_exp);
++}
++#endif /* US_SOFTWARE_GOFAST */
++#endif /* L_sf_to_usi || L_df_to_usi */
++
++#if defined(L_negate_sf) || defined(L_negate_df) || defined(L_negate_tf)
++FLO_type
++negate (FLO_type arg_a)
++{
++ fp_number_type a;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &a);
++
++ flip_sign (&a);
++ return pack_d (&a);
++}
++#endif /* L_negate_sf || L_negate_df */
++
++#ifdef FLOAT
++
++#if defined(L_make_sf)
++SFtype
++__make_fp(fp_class_type class,
++ unsigned int sign,
++ int exp,
++ USItype frac)
++{
++ fp_number_type in;
++
++ in.class = class;
++ in.sign = sign;
++ in.normal_exp = exp;
++ in.fraction.ll = frac;
++ return pack_d (&in);
++}
++#endif /* L_make_sf */
++
++#ifndef FLOAT_ONLY
++
++/* This enables one to build an fp library that supports float but not double.
++ Otherwise, we would get an undefined reference to __make_dp.
++ This is needed for some 8-bit ports that can't handle well values that
++ are 8-bytes in size, so we just don't support double for them at all. */
++
++#if defined(L_sf_to_df)
++DFtype
++sf_to_df (SFtype arg_a)
++{
++ fp_number_type in;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &in);
++
++ return __make_dp (in.class, in.sign, in.normal_exp,
++ ((UDItype) in.fraction.ll) << F_D_BITOFF);
++}
++#endif /* L_sf_to_df */
++
++#if defined(L_sf_to_tf) && defined(TMODES)
++TFtype
++sf_to_tf (SFtype arg_a)
++{
++ fp_number_type in;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &in);
++
++ return __make_tp (in.class, in.sign, in.normal_exp,
++ ((UTItype) in.fraction.ll) << F_T_BITOFF);
++}
++#endif /* L_sf_to_df */
++
++#endif /* ! FLOAT_ONLY */
++#endif /* FLOAT */
++
++#ifndef FLOAT
++
++extern SFtype __make_fp (fp_class_type, unsigned int, int, USItype);
++
++#if defined(L_make_df)
++DFtype
++__make_dp (fp_class_type class, unsigned int sign, int exp, UDItype frac)
++{
++ fp_number_type in;
++
++ in.class = class;
++ in.sign = sign;
++ in.normal_exp = exp;
++ in.fraction.ll = frac;
++ return pack_d (&in);
++}
++#endif /* L_make_df */
++
++#if defined(L_df_to_sf)
++SFtype
++df_to_sf (DFtype arg_a)
++{
++ fp_number_type in;
++ USItype sffrac;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &in);
++
++ sffrac = in.fraction.ll >> F_D_BITOFF;
++
++ /* We set the lowest guard bit in SFFRAC if we discarded any non
++ zero bits. */
++ if ((in.fraction.ll & (((USItype) 1 << F_D_BITOFF) - 1)) != 0)
++ sffrac |= 1;
++
++ return __make_fp (in.class, in.sign, in.normal_exp, sffrac);
++}
++#endif /* L_df_to_sf */
++
++#if defined(L_df_to_tf) && defined(TMODES) \
++ && !defined(FLOAT) && !defined(TFLOAT)
++TFtype
++df_to_tf (DFtype arg_a)
++{
++ fp_number_type in;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &in);
++
++ return __make_tp (in.class, in.sign, in.normal_exp,
++ ((UTItype) in.fraction.ll) << D_T_BITOFF);
++}
++#endif /* L_sf_to_df */
++
++#ifdef TFLOAT
++#if defined(L_make_tf)
++TFtype
++__make_tp(fp_class_type class,
++ unsigned int sign,
++ int exp,
++ UTItype frac)
++{
++ fp_number_type in;
++
++ in.class = class;
++ in.sign = sign;
++ in.normal_exp = exp;
++ in.fraction.ll = frac;
++ return pack_d (&in);
++}
++#endif /* L_make_tf */
++
++#if defined(L_tf_to_df)
++DFtype
++tf_to_df (TFtype arg_a)
++{
++ fp_number_type in;
++ UDItype sffrac;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &in);
++
++ sffrac = in.fraction.ll >> D_T_BITOFF;
++
++ /* We set the lowest guard bit in SFFRAC if we discarded any non
++ zero bits. */
++ if ((in.fraction.ll & (((UTItype) 1 << D_T_BITOFF) - 1)) != 0)
++ sffrac |= 1;
++
++ return __make_dp (in.class, in.sign, in.normal_exp, sffrac);
++}
++#endif /* L_tf_to_df */
++
++#if defined(L_tf_to_sf)
++SFtype
++tf_to_sf (TFtype arg_a)
++{
++ fp_number_type in;
++ USItype sffrac;
++ FLO_union_type au;
++
++ au.value = arg_a;
++ unpack_d (&au, &in);
++
++ sffrac = in.fraction.ll >> F_T_BITOFF;
++
++ /* We set the lowest guard bit in SFFRAC if we discarded any non
++ zero bits. */
++ if ((in.fraction.ll & (((UTItype) 1 << F_T_BITOFF) - 1)) != 0)
++ sffrac |= 1;
++
++ return __make_fp (in.class, in.sign, in.normal_exp, sffrac);
++}
++#endif /* L_tf_to_sf */
++#endif /* TFLOAT */
++
++#endif /* ! FLOAT */
++#endif /* !EXTENDED_FLOAT_STUBS */
+--- ./gcc/gcc/libgcc2.c
++++ ./gcc/gcc/libgcc2.c
+@@ -0,0 +1,1669 @@
++/* More subroutines needed by GCC output code on some machines. */
++/* Compile this one with gcc. */
++/* Copyright (C) 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++ 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
++
++This file is part of GCC.
++
++GCC is free software; you can redistribute it and/or modify it under
++the terms of the GNU General Public License as published by the Free
++Software Foundation; either version 2, or (at your option) any later
++version.
++
++In addition to the permissions in the GNU General Public License, the
++Free Software Foundation gives you unlimited permission to link the
++compiled version of this file into combinations with other programs,
++and to distribute those combinations without any restriction coming
++from the use of this file. (The General Public License restrictions
++do apply in other respects; for example, they cover modification of
++the file, and distribution when not linked into a combine
++executable.)
++
++GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++WARRANTY; without even the implied warranty of MERCHANTABILITY or
++FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++for more details.
++
++You should have received a copy of the GNU General Public License
++along with GCC; see the file COPYING. If not, write to the Free
++Software Foundation, 59 Temple Place - Suite 330, Boston, MA
++02111-1307, USA. */
++
++
++/* We include auto-host.h here to get HAVE_GAS_HIDDEN. This is
++ supposedly valid even though this is a "target" file. */
++#include "auto-host.h"
++
++/* It is incorrect to include config.h here, because this file is being
++ compiled for the target, and hence definitions concerning only the host
++ do not apply. */
++#include "tconfig.h"
++#include "tsystem.h"
++#include "coretypes.h"
++#include "tm.h"
++
++/* Don't use `fancy_abort' here even if config.h says to use it. */
++#ifdef abort
++#undef abort
++#endif
++
++#ifdef HAVE_GAS_HIDDEN
++#define ATTRIBUTE_HIDDEN __attribute__ ((__visibility__ ("hidden")))
++#else
++#define ATTRIBUTE_HIDDEN
++#endif
++
++#include "libgcc2.h"
++\f
++#ifdef DECLARE_LIBRARY_RENAMES
++ DECLARE_LIBRARY_RENAMES
++#endif
++
++#if defined (L_negdi2)
++DWtype
++__negdi2 (DWtype u)
++{
++ const DWunion uu = {.ll = u};
++ const DWunion w = { {.low = -uu.s.low,
++ .high = -uu.s.high - ((UWtype) -uu.s.low > 0) } };
++
++ return w.ll;
++}
++#endif
++
++#ifdef L_addvsi3
++Wtype
++__addvsi3 (Wtype a, Wtype b)
++{
++ const Wtype w = a + b;
++
++ if (b >= 0 ? w < a : w > a)
++ abort ();
++
++ return w;
++}
++#endif
++\f
++#ifdef L_addvdi3
++DWtype
++__addvdi3 (DWtype a, DWtype b)
++{
++ const DWtype w = a + b;
++
++ if (b >= 0 ? w < a : w > a)
++ abort ();
++
++ return w;
++}
++#endif
++\f
++#ifdef L_subvsi3
++Wtype
++__subvsi3 (Wtype a, Wtype b)
++{
++ const DWtype w = a - b;
++
++ if (b >= 0 ? w > a : w < a)
++ abort ();
++
++ return w;
++}
++#endif
++\f
++#ifdef L_subvdi3
++DWtype
++__subvdi3 (DWtype a, DWtype b)
++{
++ const DWtype w = a - b;
++
++ if (b >= 0 ? w > a : w < a)
++ abort ();
++
++ return w;
++}
++#endif
++\f
++#ifdef L_mulvsi3
++#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
++Wtype
++__mulvsi3 (Wtype a, Wtype b)
++{
++ const DWtype w = (DWtype) a * (DWtype) b;
++
++ if (((a >= 0) == (b >= 0))
++ ? (UDWtype) w > (UDWtype) (((DWtype) 1 << (WORD_SIZE - 1)) - 1)
++ : (UDWtype) w < (UDWtype) ((DWtype) -1 << (WORD_SIZE - 1)))
++ abort ();
++
++ return w;
++}
++#endif
++\f
++#ifdef L_negvsi2
++Wtype
++__negvsi2 (Wtype a)
++{
++ const Wtype w = -a;
++
++ if (a >= 0 ? w > 0 : w < 0)
++ abort ();
++
++ return w;
++}
++#endif
++\f
++#ifdef L_negvdi2
++DWtype
++__negvdi2 (DWtype a)
++{
++ const DWtype w = -a;
++
++ if (a >= 0 ? w > 0 : w < 0)
++ abort ();
++
++ return w;
++}
++#endif
++\f
++#ifdef L_absvsi2
++Wtype
++__absvsi2 (Wtype a)
++{
++ Wtype w = a;
++
++ if (a < 0)
++#ifdef L_negvsi2
++ w = __negvsi2 (a);
++#else
++ w = -a;
++
++ if (w < 0)
++ abort ();
++#endif
++
++ return w;
++}
++#endif
++\f
++#ifdef L_absvdi2
++DWtype
++__absvdi2 (DWtype a)
++{
++ DWtype w = a;
++
++ if (a < 0)
++#ifdef L_negvdi2
++ w = __negvdi2 (a);
++#else
++ w = -a;
++
++ if (w < 0)
++ abort ();
++#endif
++
++ return w;
++}
++#endif
++\f
++#ifdef L_mulvdi3
++#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
++DWtype
++__mulvdi3 (DWtype u, DWtype v)
++{
++ /* The unchecked multiplication needs 3 Wtype x Wtype multiplications,
++ but the checked multiplication needs only two. */
++ const DWunion uu = {.ll = u};
++ const DWunion vv = {.ll = v};
++
++ if (__builtin_expect (uu.s.high == uu.s.low >> (WORD_SIZE - 1), 1))
++ {
++ /* u fits in a single Wtype. */
++ if (__builtin_expect (vv.s.high == vv.s.low >> (WORD_SIZE - 1), 1))
++ {
++ /* v fits in a single Wtype as well. */
++ /* A single multiplication. No overflow risk. */
++ return (DWtype) uu.s.low * (DWtype) vv.s.low;
++ }
++ else
++ {
++ /* Two multiplications. */
++ DWunion w0 = {.ll = (UDWtype) (UWtype) uu.s.low
++ * (UDWtype) (UWtype) vv.s.low};
++ DWunion w1 = {.ll = (UDWtype) (UWtype) uu.s.low
++ * (UDWtype) (UWtype) vv.s.high};
++
++ if (vv.s.high < 0)
++ w1.s.high -= uu.s.low;
++ if (uu.s.low < 0)
++ w1.ll -= vv.ll;
++ w1.ll += (UWtype) w0.s.high;
++ if (__builtin_expect (w1.s.high == w1.s.low >> (WORD_SIZE - 1), 1))
++ {
++ w0.s.high = w1.s.low;
++ return w0.ll;
++ }
++ }
++ }
++ else
++ {
++ if (__builtin_expect (vv.s.high == vv.s.low >> (WORD_SIZE - 1), 1))
++ {
++ /* v fits into a single Wtype. */
++ /* Two multiplications. */
++ DWunion w0 = {.ll = (UDWtype) (UWtype) uu.s.low
++ * (UDWtype) (UWtype) vv.s.low};
++ DWunion w1 = {.ll = (UDWtype) (UWtype) uu.s.high
++ * (UDWtype) (UWtype) vv.s.low};
++
++ if (uu.s.high < 0)
++ w1.s.high -= vv.s.low;
++ if (vv.s.low < 0)
++ w1.ll -= uu.ll;
++ w1.ll += (UWtype) w0.s.high;
++ if (__builtin_expect (w1.s.high == w1.s.low >> (WORD_SIZE - 1), 1))
++ {
++ w0.s.high = w1.s.low;
++ return w0.ll;
++ }
++ }
++ else
++ {
++ /* A few sign checks and a single multiplication. */
++ if (uu.s.high >= 0)
++ {
++ if (vv.s.high >= 0)
++ {
++ if (uu.s.high == 0 && vv.s.high == 0)
++ {
++ const DWtype w = (UDWtype) (UWtype) uu.s.low
++ * (UDWtype) (UWtype) vv.s.low;
++ if (__builtin_expect (w >= 0, 1))
++ return w;
++ }
++ }
++ else
++ {
++ if (uu.s.high == 0 && vv.s.high == (Wtype) -1)
++ {
++ DWunion ww = {.ll = (UDWtype) (UWtype) uu.s.low
++ * (UDWtype) (UWtype) vv.s.low};
++
++ ww.s.high -= uu.s.low;
++ if (__builtin_expect (ww.s.high < 0, 1))
++ return ww.ll;
++ }
++ }
++ }
++ else
++ {
++ if (vv.s.high >= 0)
++ {
++ if (uu.s.high == (Wtype) -1 && vv.s.high == 0)
++ {
++ DWunion ww = {.ll = (UDWtype) (UWtype) uu.s.low
++ * (UDWtype) (UWtype) vv.s.low};
++
++ ww.s.high -= vv.s.low;
++ if (__builtin_expect (ww.s.high < 0, 1))
++ return ww.ll;
++ }
++ }
++ else
++ {
++ if (uu.s.high == (Wtype) -1 && vv.s.high == (Wtype) - 1)
++ {
++ DWunion ww = {.ll = (UDWtype) (UWtype) uu.s.low
++ * (UDWtype) (UWtype) vv.s.low};
++
++ ww.s.high -= uu.s.low;
++ ww.s.high -= vv.s.low;
++ if (__builtin_expect (ww.s.high >= 0, 1))
++ return ww.ll;
++ }
++ }
++ }
++ }
++ }
++
++ /* Overflow. */
++ abort ();
++}
++#endif
++\f
++
++/* Unless shift functions are defined with full ANSI prototypes,
++ parameter b will be promoted to int if word_type is smaller than an int. */
++#ifdef L_lshrdi3
++DWtype
++__lshrdi3 (DWtype u, word_type b)
++{
++ if (b == 0)
++ return u;
++
++ const DWunion uu = {.ll = u};
++ const word_type bm = (sizeof (Wtype) * BITS_PER_UNIT) - b;
++ DWunion w;
++
++ if (bm <= 0)
++ {
++ w.s.high = 0;
++ w.s.low = (UWtype) uu.s.high >> -bm;
++ }
++ else
++ {
++ const UWtype carries = (UWtype) uu.s.high << bm;
++
++ w.s.high = (UWtype) uu.s.high >> b;
++ w.s.low = ((UWtype) uu.s.low >> b) | carries;
++ }
++
++ return w.ll;
++}
++#endif
++
++#ifdef L_ashldi3
++DWtype
++__ashldi3 (DWtype u, word_type b)
++{
++ if (b == 0)
++ return u;
++
++ const DWunion uu = {.ll = u};
++ const word_type bm = (sizeof (Wtype) * BITS_PER_UNIT) - b;
++ DWunion w;
++
++ if (bm <= 0)
++ {
++ w.s.low = 0;
++ w.s.high = (UWtype) uu.s.low << -bm;
++ }
++ else
++ {
++ const UWtype carries = (UWtype) uu.s.low >> bm;
++
++ w.s.low = (UWtype) uu.s.low << b;
++ w.s.high = ((UWtype) uu.s.high << b) | carries;
++ }
++
++ return w.ll;
++}
++#endif
++
++#ifdef L_ashrdi3
++DWtype
++__ashrdi3 (DWtype u, word_type b)
++{
++ if (b == 0)
++ return u;
++
++ const DWunion uu = {.ll = u};
++ const word_type bm = (sizeof (Wtype) * BITS_PER_UNIT) - b;
++ DWunion w;
++
++ if (bm <= 0)
++ {
++ /* w.s.high = 1..1 or 0..0 */
++ w.s.high = uu.s.high >> (sizeof (Wtype) * BITS_PER_UNIT - 1);
++ w.s.low = uu.s.high >> -bm;
++ }
++ else
++ {
++ const UWtype carries = (UWtype) uu.s.high << bm;
++
++ w.s.high = uu.s.high >> b;
++ w.s.low = ((UWtype) uu.s.low >> b) | carries;
++ }
++
++ return w.ll;
++}
++#endif
++\f
++#ifdef L_ffssi2
++#undef int
++extern int __ffsSI2 (UWtype u);
++int
++__ffsSI2 (UWtype u)
++{
++ UWtype count;
++
++ if (u == 0)
++ return 0;
++
++ count_trailing_zeros (count, u);
++ return count + 1;
++}
++#endif
++\f
++#ifdef L_ffsdi2
++#undef int
++extern int __ffsDI2 (DWtype u);
++int
++__ffsDI2 (DWtype u)
++{
++ const DWunion uu = {.ll = u};
++ UWtype word, count, add;
++
++ if (uu.s.low != 0)
++ word = uu.s.low, add = 0;
++ else if (uu.s.high != 0)
++ word = uu.s.high, add = BITS_PER_UNIT * sizeof (Wtype);
++ else
++ return 0;
++
++ count_trailing_zeros (count, word);
++ return count + add + 1;
++}
++#endif
++\f
++#ifdef L_muldi3
++DWtype
++__muldi3 (DWtype u, DWtype v)
++{
++ const DWunion uu = {.ll = u};
++ const DWunion vv = {.ll = v};
++ DWunion w = {.ll = __umulsidi3 (uu.s.low, vv.s.low)};
++
++ w.s.high += ((UWtype) uu.s.low * (UWtype) vv.s.high
++ + (UWtype) uu.s.high * (UWtype) vv.s.low);
++
++ return w.ll;
++}
++#endif
++\f
++#if (defined (L_udivdi3) || defined (L_divdi3) || \
++ defined (L_umoddi3) || defined (L_moddi3))
++#if defined (sdiv_qrnnd)
++#define L_udiv_w_sdiv
++#endif
++#endif
++
++#ifdef L_udiv_w_sdiv
++#if defined (sdiv_qrnnd)
++#if (defined (L_udivdi3) || defined (L_divdi3) || \
++ defined (L_umoddi3) || defined (L_moddi3))
++static inline __attribute__ ((__always_inline__))
++#endif
++UWtype
++__udiv_w_sdiv (UWtype *rp, UWtype a1, UWtype a0, UWtype d)
++{
++ UWtype q, r;
++ UWtype c0, c1, b1;
++
++ if ((Wtype) d >= 0)
++ {
++ if (a1 < d - a1 - (a0 >> (W_TYPE_SIZE - 1)))
++ {
++ /* dividend, divisor, and quotient are nonnegative */
++ sdiv_qrnnd (q, r, a1, a0, d);
++ }
++ else
++ {
++ /* Compute c1*2^32 + c0 = a1*2^32 + a0 - 2^31*d */
++ sub_ddmmss (c1, c0, a1, a0, d >> 1, d << (W_TYPE_SIZE - 1));
++ /* Divide (c1*2^32 + c0) by d */
++ sdiv_qrnnd (q, r, c1, c0, d);
++ /* Add 2^31 to quotient */
++ q += (UWtype) 1 << (W_TYPE_SIZE - 1);
++ }
++ }
++ else
++ {
++ b1 = d >> 1; /* d/2, between 2^30 and 2^31 - 1 */
++ c1 = a1 >> 1; /* A/2 */
++ c0 = (a1 << (W_TYPE_SIZE - 1)) + (a0 >> 1);
++
++ if (a1 < b1) /* A < 2^32*b1, so A/2 < 2^31*b1 */
++ {
++ sdiv_qrnnd (q, r, c1, c0, b1); /* (A/2) / (d/2) */
++
++ r = 2*r + (a0 & 1); /* Remainder from A/(2*b1) */
++ if ((d & 1) != 0)
++ {
++ if (r >= q)
++ r = r - q;
++ else if (q - r <= d)
++ {
++ r = r - q + d;
++ q--;
++ }
++ else
++ {
++ r = r - q + 2*d;
++ q -= 2;
++ }
++ }
++ }
++ else if (c1 < b1) /* So 2^31 <= (A/2)/b1 < 2^32 */
++ {
++ c1 = (b1 - 1) - c1;
++ c0 = ~c0; /* logical NOT */
++
++ sdiv_qrnnd (q, r, c1, c0, b1); /* (A/2) / (d/2) */
++
++ q = ~q; /* (A/2)/b1 */
++ r = (b1 - 1) - r;
++
++ r = 2*r + (a0 & 1); /* A/(2*b1) */
++
++ if ((d & 1) != 0)
++ {
++ if (r >= q)
++ r = r - q;
++ else if (q - r <= d)
++ {
++ r = r - q + d;
++ q--;
++ }
++ else
++ {
++ r = r - q + 2*d;
++ q -= 2;
++ }
++ }
++ }
++ else /* Implies c1 = b1 */
++ { /* Hence a1 = d - 1 = 2*b1 - 1 */
++ if (a0 >= -d)
++ {
++ q = -1;
++ r = a0 + d;
++ }
++ else
++ {
++ q = -2;
++ r = a0 + 2*d;
++ }
++ }
++ }
++
++ *rp = r;
++ return q;
++}
++#else
++/* If sdiv_qrnnd doesn't exist, define dummy __udiv_w_sdiv. */
++UWtype
++__udiv_w_sdiv (UWtype *rp __attribute__ ((__unused__)),
++ UWtype a1 __attribute__ ((__unused__)),
++ UWtype a0 __attribute__ ((__unused__)),
++ UWtype d __attribute__ ((__unused__)))
++{
++ return 0;
++}
++#endif
++#endif
++\f
++#if (defined (L_udivdi3) || defined (L_divdi3) || \
++ defined (L_umoddi3) || defined (L_moddi3))
++#define L_udivmoddi4
++#endif
++
++#ifdef L_clz
++const UQItype __clz_tab[] =
++{
++ 0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,
++ 6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,
++ 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
++ 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
++ 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
++ 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
++ 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
++ 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
++};
++#endif
++\f
++#ifdef L_clzsi2
++#undef int
++extern int __clzSI2 (UWtype x);
++int
++__clzSI2 (UWtype x)
++{
++ Wtype ret;
++
++ count_leading_zeros (ret, x);
++
++ return ret;
++}
++#endif
++\f
++#ifdef L_clzdi2
++#undef int
++extern int __clzDI2 (UDWtype x);
++int
++__clzDI2 (UDWtype x)
++{
++ const DWunion uu = {.ll = x};
++ UWtype word;
++ Wtype ret, add;
++
++ if (uu.s.high)
++ word = uu.s.high, add = 0;
++ else
++ word = uu.s.low, add = W_TYPE_SIZE;
++
++ count_leading_zeros (ret, word);
++ return ret + add;
++}
++#endif
++\f
++#ifdef L_ctzsi2
++#undef int
++extern int __ctzSI2 (UWtype x);
++int
++__ctzSI2 (UWtype x)
++{
++ Wtype ret;
++
++ count_trailing_zeros (ret, x);
++
++ return ret;
++}
++#endif
++\f
++#ifdef L_ctzdi2
++#undef int
++extern int __ctzDI2 (UDWtype x);
++int
++__ctzDI2 (UDWtype x)
++{
++ const DWunion uu = {.ll = x};
++ UWtype word;
++ Wtype ret, add;
++
++ if (uu.s.low)
++ word = uu.s.low, add = 0;
++ else
++ word = uu.s.high, add = W_TYPE_SIZE;
++
++ count_trailing_zeros (ret, word);
++ return ret + add;
++}
++#endif
++
++#if (defined (L_popcountsi2) || defined (L_popcountdi2) \
++ || defined (L_popcount_tab))
++extern const UQItype __popcount_tab[] ATTRIBUTE_HIDDEN;
++#endif
++
++#ifdef L_popcount_tab
++const UQItype __popcount_tab[] =
++{
++ 0,1,1,2,1,2,2,3,1,2,2,3,2,3,3,4,1,2,2,3,2,3,3,4,2,3,3,4,3,4,4,5,
++ 1,2,2,3,2,3,3,4,2,3,3,4,3,4,4,5,2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,
++ 1,2,2,3,2,3,3,4,2,3,3,4,3,4,4,5,2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,
++ 2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,3,4,4,5,4,5,5,6,4,5,5,6,5,6,6,7,
++ 1,2,2,3,2,3,3,4,2,3,3,4,3,4,4,5,2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,
++ 2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,3,4,4,5,4,5,5,6,4,5,5,6,5,6,6,7,
++ 2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,3,4,4,5,4,5,5,6,4,5,5,6,5,6,6,7,
++ 3,4,4,5,4,5,5,6,4,5,5,6,5,6,6,7,4,5,5,6,5,6,6,7,5,6,6,7,6,7,7,8,
++};
++#endif
++\f
++#ifdef L_popcountsi2
++#undef int
++extern int __popcountSI2 (UWtype x);
++int
++__popcountSI2 (UWtype x)
++{
++ UWtype i, ret = 0;
++
++ for (i = 0; i < W_TYPE_SIZE; i += 8)
++ ret += __popcount_tab[(x >> i) & 0xff];
++
++ return ret;
++}
++#endif
++\f
++#ifdef L_popcountdi2
++#undef int
++extern int __popcountDI2 (UDWtype x);
++int
++__popcountDI2 (UDWtype x)
++{
++ UWtype i, ret = 0;
++
++ for (i = 0; i < 2*W_TYPE_SIZE; i += 8)
++ ret += __popcount_tab[(x >> i) & 0xff];
++
++ return ret;
++}
++#endif
++\f
++#ifdef L_paritysi2
++#undef int
++extern int __paritySI2 (UWtype x);
++int
++__paritySI2 (UWtype x)
++{
++#if W_TYPE_SIZE > 64
++# error "fill out the table"
++#endif
++#if W_TYPE_SIZE > 32
++ x ^= x >> 32;
++#endif
++#if W_TYPE_SIZE > 16
++ x ^= x >> 16;
++#endif
++ x ^= x >> 8;
++ x ^= x >> 4;
++ x &= 0xf;
++ return (0x6996 >> x) & 1;
++}
++#endif
++\f
++#ifdef L_paritydi2
++#undef int
++extern int __parityDI2 (UDWtype x);
++int
++__parityDI2 (UDWtype x)
++{
++ const DWunion uu = {.ll = x};
++ UWtype nx = uu.s.low ^ uu.s.high;
++
++#if W_TYPE_SIZE > 64
++# error "fill out the table"
++#endif
++#if W_TYPE_SIZE > 32
++ nx ^= nx >> 32;
++#endif
++#if W_TYPE_SIZE > 16
++ nx ^= nx >> 16;
++#endif
++ nx ^= nx >> 8;
++ nx ^= nx >> 4;
++ nx &= 0xf;
++ return (0x6996 >> nx) & 1;
++}
++#endif
++
++#ifdef L_udivmoddi4
++
++#if (defined (L_udivdi3) || defined (L_divdi3) || \
++ defined (L_umoddi3) || defined (L_moddi3))
++static inline __attribute__ ((__always_inline__))
++#endif
++UDWtype
++__udivmoddi4 (UDWtype n, UDWtype d, UDWtype *rp)
++{
++ const DWunion nn = {.ll = n};
++ const DWunion dd = {.ll = d};
++ DWunion rr;
++ UWtype d0, d1, n0, n1, n2;
++ UWtype q0, q1;
++ UWtype b, bm;
++
++ d0 = dd.s.low;
++ d1 = dd.s.high;
++ n0 = nn.s.low;
++ n1 = nn.s.high;
++
++#if !UDIV_NEEDS_NORMALIZATION
++ if (d1 == 0)
++ {
++ if (d0 > n1)
++ {
++ /* 0q = nn / 0D */
++
++ udiv_qrnnd (q0, n0, n1, n0, d0);
++ q1 = 0;
++
++ /* Remainder in n0. */
++ }
++ else
++ {
++ /* qq = NN / 0d */
++
++ if (d0 == 0)
++ d0 = 1 / d0; /* Divide intentionally by zero. */
++
++ udiv_qrnnd (q1, n1, 0, n1, d0);
++ udiv_qrnnd (q0, n0, n1, n0, d0);
++
++ /* Remainder in n0. */
++ }
++
++ if (rp != 0)
++ {
++ rr.s.low = n0;
++ rr.s.high = 0;
++ *rp = rr.ll;
++ }
++ }
++
++#else /* UDIV_NEEDS_NORMALIZATION */
++
++ if (d1 == 0)
++ {
++ if (d0 > n1)
++ {
++ /* 0q = nn / 0D */
++
++ count_leading_zeros (bm, d0);
++
++ if (bm != 0)
++ {
++ /* Normalize, i.e. make the most significant bit of the
++ denominator set. */
++
++ d0 = d0 << bm;
++ n1 = (n1 << bm) | (n0 >> (W_TYPE_SIZE - bm));
++ n0 = n0 << bm;
++ }
++
++ udiv_qrnnd (q0, n0, n1, n0, d0);
++ q1 = 0;
++
++ /* Remainder in n0 >> bm. */
++ }
++ else
++ {
++ /* qq = NN / 0d */
++
++ if (d0 == 0)
++ d0 = 1 / d0; /* Divide intentionally by zero. */
++
++ count_leading_zeros (bm, d0);
++
++ if (bm == 0)
++ {
++ /* From (n1 >= d0) /\ (the most significant bit of d0 is set),
++ conclude (the most significant bit of n1 is set) /\ (the
++ leading quotient digit q1 = 1).
++
++ This special case is necessary, not an optimization.
++ (Shifts counts of W_TYPE_SIZE are undefined.) */
++
++ n1 -= d0;
++ q1 = 1;
++ }
++ else
++ {
++ /* Normalize. */
++
++ b = W_TYPE_SIZE - bm;
++
++ d0 = d0 << bm;
++ n2 = n1 >> b;
++ n1 = (n1 << bm) | (n0 >> b);
++ n0 = n0 << bm;
++
++ udiv_qrnnd (q1, n1, n2, n1, d0);
++ }
++
++ /* n1 != d0... */
++
++ udiv_qrnnd (q0, n0, n1, n0, d0);
++
++ /* Remainder in n0 >> bm. */
++ }
++
++ if (rp != 0)
++ {
++ rr.s.low = n0 >> bm;
++ rr.s.high = 0;
++ *rp = rr.ll;
++ }
++ }
++#endif /* UDIV_NEEDS_NORMALIZATION */
++
++ else
++ {
++ if (d1 > n1)
++ {
++ /* 00 = nn / DD */
++
++ q0 = 0;
++ q1 = 0;
++
++ /* Remainder in n1n0. */
++ if (rp != 0)
++ {
++ rr.s.low = n0;
++ rr.s.high = n1;
++ *rp = rr.ll;
++ }
++ }
++ else
++ {
++ /* 0q = NN / dd */
++
++ count_leading_zeros (bm, d1);
++ if (bm == 0)
++ {
++ /* From (n1 >= d1) /\ (the most significant bit of d1 is set),
++ conclude (the most significant bit of n1 is set) /\ (the
++ quotient digit q0 = 0 or 1).
++
++ This special case is necessary, not an optimization. */
++
++ /* The condition on the next line takes advantage of that
++ n1 >= d1 (true due to program flow). */
++ if (n1 > d1 || n0 >= d0)
++ {
++ q0 = 1;
++ sub_ddmmss (n1, n0, n1, n0, d1, d0);
++ }
++ else
++ q0 = 0;
++
++ q1 = 0;
++
++ if (rp != 0)
++ {
++ rr.s.low = n0;
++ rr.s.high = n1;
++ *rp = rr.ll;
++ }
++ }
++ else
++ {
++ UWtype m1, m0;
++ /* Normalize. */
++
++ b = W_TYPE_SIZE - bm;
++
++ d1 = (d1 << bm) | (d0 >> b);
++ d0 = d0 << bm;
++ n2 = n1 >> b;
++ n1 = (n1 << bm) | (n0 >> b);
++ n0 = n0 << bm;
++
++ udiv_qrnnd (q0, n1, n2, n1, d1);
++ umul_ppmm (m1, m0, q0, d0);
++
++ if (m1 > n1 || (m1 == n1 && m0 > n0))
++ {
++ q0--;
++ sub_ddmmss (m1, m0, m1, m0, d1, d0);
++ }
++
++ q1 = 0;
++
++ /* Remainder in (n1n0 - m1m0) >> bm. */
++ if (rp != 0)
++ {
++ sub_ddmmss (n1, n0, n1, n0, m1, m0);
++ rr.s.low = (n1 << b) | (n0 >> bm);
++ rr.s.high = n1 >> bm;
++ *rp = rr.ll;
++ }
++ }
++ }
++ }
++
++ const DWunion ww = {{.low = q0, .high = q1}};
++ return ww.ll;
++}
++#endif
++
++#ifdef L_divdi3
++DWtype
++__divdi3 (DWtype u, DWtype v)
++{
++ word_type c = 0;
++ DWunion uu = {.ll = u};
++ DWunion vv = {.ll = v};
++ DWtype w;
++
++ if (uu.s.high < 0)
++ c = ~c,
++ uu.ll = -uu.ll;
++ if (vv.s.high < 0)
++ c = ~c,
++ vv.ll = -vv.ll;
++
++ w = __udivmoddi4 (uu.ll, vv.ll, (UDWtype *) 0);
++ if (c)
++ w = -w;
++
++ return w;
++}
++#endif
++
++#ifdef L_moddi3
++DWtype
++__moddi3 (DWtype u, DWtype v)
++{
++ word_type c = 0;
++ DWunion uu = {.ll = u};
++ DWunion vv = {.ll = v};
++ DWtype w;
++
++ if (uu.s.high < 0)
++ c = ~c,
++ uu.ll = -uu.ll;
++ if (vv.s.high < 0)
++ vv.ll = -vv.ll;
++
++ (void) __udivmoddi4 (uu.ll, vv.ll, &w);
++ if (c)
++ w = -w;
++
++ return w;
++}
++#endif
++
++#ifdef L_umoddi3
++UDWtype
++__umoddi3 (UDWtype u, UDWtype v)
++{
++ UDWtype w;
++
++ (void) __udivmoddi4 (u, v, &w);
++
++ return w;
++}
++#endif
++
++#ifdef L_udivdi3
++UDWtype
++__udivdi3 (UDWtype n, UDWtype d)
++{
++ return __udivmoddi4 (n, d, (UDWtype *) 0);
++}
++#endif
++\f
++#ifdef L_cmpdi2
++word_type
++__cmpdi2 (DWtype a, DWtype b)
++{
++ const DWunion au = {.ll = a};
++ const DWunion bu = {.ll = b};
++
++ if (au.s.high < bu.s.high)
++ return 0;
++ else if (au.s.high > bu.s.high)
++ return 2;
++ if ((UWtype) au.s.low < (UWtype) bu.s.low)
++ return 0;
++ else if ((UWtype) au.s.low > (UWtype) bu.s.low)
++ return 2;
++ return 1;
++}
++#endif
++
++#ifdef L_ucmpdi2
++word_type
++__ucmpdi2 (DWtype a, DWtype b)
++{
++ const DWunion au = {.ll = a};
++ const DWunion bu = {.ll = b};
++
++ if ((UWtype) au.s.high < (UWtype) bu.s.high)
++ return 0;
++ else if ((UWtype) au.s.high > (UWtype) bu.s.high)
++ return 2;
++ if ((UWtype) au.s.low < (UWtype) bu.s.low)
++ return 0;
++ else if ((UWtype) au.s.low > (UWtype) bu.s.low)
++ return 2;
++ return 1;
++}
++#endif
++\f
++#if defined(L_fixunstfdi) && (LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 128)
++#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
++#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
++
++DWtype
++__fixunstfDI (TFtype a)
++{
++ if (a < 0)
++ return 0;
++
++ /* Compute high word of result, as a flonum. */
++ const TFtype b = (a / HIGH_WORD_COEFF);
++ /* Convert that to fixed (but not to DWtype!),
++ and shift it into the high word. */
++ UDWtype v = (UWtype) b;
++ v <<= WORD_SIZE;
++ /* Remove high part from the TFtype, leaving the low part as flonum. */
++ a -= (TFtype)v;
++ /* Convert that to fixed (but not to DWtype!) and add it in.
++ Sometimes A comes out negative. This is significant, since
++ A has more bits than a long int does. */
++ if (a < 0)
++ v -= (UWtype) (- a);
++ else
++ v += (UWtype) a;
++ return v;
++}
++#endif
++
++#if defined(L_fixtfdi) && (LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 128)
++DWtype
++__fixtfdi (TFtype a)
++{
++ if (a < 0)
++ return - __fixunstfDI (-a);
++ return __fixunstfDI (a);
++}
++#endif
++
++#if defined(L_fixunsxfdi) && (LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 96)
++#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
++#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
++
++DWtype
++__fixunsxfDI (XFtype a)
++{
++ if (a < 0)
++ return 0;
++
++ /* Compute high word of result, as a flonum. */
++ const XFtype b = (a / HIGH_WORD_COEFF);
++ /* Convert that to fixed (but not to DWtype!),
++ and shift it into the high word. */
++ UDWtype v = (UWtype) b;
++ v <<= WORD_SIZE;
++ /* Remove high part from the XFtype, leaving the low part as flonum. */
++ a -= (XFtype)v;
++ /* Convert that to fixed (but not to DWtype!) and add it in.
++ Sometimes A comes out negative. This is significant, since
++ A has more bits than a long int does. */
++ if (a < 0)
++ v -= (UWtype) (- a);
++ else
++ v += (UWtype) a;
++ return v;
++}
++#endif
++
++#if defined(L_fixxfdi) && (LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 96)
++DWtype
++__fixxfdi (XFtype a)
++{
++ if (a < 0)
++ return - __fixunsxfDI (-a);
++ return __fixunsxfDI (a);
++}
++#endif
++
++#ifdef L_fixunsdfdi
++#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
++#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
++
++DWtype
++__fixunsdfDI (DFtype a)
++{
++ /* Get high part of result. The division here will just moves the radix
++ point and will not cause any rounding. Then the conversion to integral
++ type chops result as desired. */
++ const UWtype hi = a / HIGH_WORD_COEFF;
++
++ /* Get low part of result. Convert `hi' to floating type and scale it back,
++ then subtract this from the number being converted. This leaves the low
++ part. Convert that to integral type. */
++ const UWtype lo = (a - ((DFtype) hi) * HIGH_WORD_COEFF);
++
++ /* Assemble result from the two parts. */
++ return ((UDWtype) hi << WORD_SIZE) | lo;
++}
++#endif
++
++#ifdef L_fixdfdi
++DWtype
++__fixdfdi (DFtype a)
++{
++ if (a < 0)
++ return - __fixunsdfDI (-a);
++ return __fixunsdfDI (a);
++}
++#endif
++
++#ifdef L_fixunssfdi
++#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
++#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
++
++DWtype
++__fixunssfDI (SFtype original_a)
++{
++ /* Convert the SFtype to a DFtype, because that is surely not going
++ to lose any bits. Some day someone else can write a faster version
++ that avoids converting to DFtype, and verify it really works right. */
++ const DFtype a = original_a;
++
++ /* Get high part of result. The division here will just moves the radix
++ point and will not cause any rounding. Then the conversion to integral
++ type chops result as desired. */
++ const UWtype hi = a / HIGH_WORD_COEFF;
++
++ /* Get low part of result. Convert `hi' to floating type and scale it back,
++ then subtract this from the number being converted. This leaves the low
++ part. Convert that to integral type. */
++ const UWtype lo = (a - ((DFtype) hi) * HIGH_WORD_COEFF);
++
++ /* Assemble result from the two parts. */
++ return ((UDWtype) hi << WORD_SIZE) | lo;
++}
++#endif
++
++#ifdef L_fixsfdi
++DWtype
++__fixsfdi (SFtype a)
++{
++ if (a < 0)
++ return - __fixunssfDI (-a);
++ return __fixunssfDI (a);
++}
++#endif
++
++#if defined(L_floatdixf) && (LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 96)
++#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
++#define HIGH_HALFWORD_COEFF (((UDWtype) 1) << (WORD_SIZE / 2))
++#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
++
++XFtype
++__floatdixf (DWtype u)
++{
++ XFtype d = (Wtype) (u >> WORD_SIZE);
++ d *= HIGH_HALFWORD_COEFF;
++ d *= HIGH_HALFWORD_COEFF;
++ d += (UWtype) (u & (HIGH_WORD_COEFF - 1));
++
++ return d;
++}
++#endif
++
++#if defined(L_floatditf) && (LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 128)
++#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
++#define HIGH_HALFWORD_COEFF (((UDWtype) 1) << (WORD_SIZE / 2))
++#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
++
++TFtype
++__floatditf (DWtype u)
++{
++ TFtype d = (Wtype) (u >> WORD_SIZE);
++ d *= HIGH_HALFWORD_COEFF;
++ d *= HIGH_HALFWORD_COEFF;
++ d += (UWtype) (u & (HIGH_WORD_COEFF - 1));
++
++ return d;
++}
++#endif
++
++#ifdef L_floatdidf
++#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
++#define HIGH_HALFWORD_COEFF (((UDWtype) 1) << (WORD_SIZE / 2))
++#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
++
++DFtype
++__floatdidf (DWtype u)
++{
++ DFtype d = (Wtype) (u >> WORD_SIZE);
++ d *= HIGH_HALFWORD_COEFF;
++ d *= HIGH_HALFWORD_COEFF;
++ d += (UWtype) (u & (HIGH_WORD_COEFF - 1));
++
++ return d;
++}
++#endif
++
++#ifdef L_floatdisf
++#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
++#define HIGH_HALFWORD_COEFF (((UDWtype) 1) << (WORD_SIZE / 2))
++#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
++
++#define DI_SIZE (sizeof (DWtype) * BITS_PER_UNIT)
++#define DF_SIZE DBL_MANT_DIG
++#define SF_SIZE FLT_MANT_DIG
++
++SFtype
++__floatdisf (DWtype u)
++{
++ /* Protect against double-rounding error.
++ Represent any low-order bits, that might be truncated in DFmode,
++ by a bit that won't be lost. The bit can go in anywhere below the
++ rounding position of the SFmode. A fixed mask and bit position
++ handles all usual configurations. It doesn't handle the case
++ of 128-bit DImode, however. */
++ if (DF_SIZE < DI_SIZE
++ && DF_SIZE > (DI_SIZE - DF_SIZE + SF_SIZE))
++ {
++#define REP_BIT ((UDWtype) 1 << (DI_SIZE - DF_SIZE))
++ if (! (- ((DWtype) 1 << DF_SIZE) < u
++ && u < ((DWtype) 1 << DF_SIZE)))
++ {
++ if ((UDWtype) u & (REP_BIT - 1))
++ {
++ u &= ~ (REP_BIT - 1);
++ u |= REP_BIT;
++ }
++ }
++ }
++ /* Do the calculation in DFmode
++ so that we don't lose any of the precision of the high word
++ while multiplying it. */
++ DFtype f = (Wtype) (u >> WORD_SIZE);
++ f *= HIGH_HALFWORD_COEFF;
++ f *= HIGH_HALFWORD_COEFF;
++ f += (UWtype) (u & (HIGH_WORD_COEFF - 1));
++
++ return (SFtype) f;
++}
++#endif
++
++#if defined(L_fixunsxfsi) && LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 96
++/* Reenable the normal types, in case limits.h needs them. */
++#undef char
++#undef short
++#undef int
++#undef long
++#undef unsigned
++#undef float
++#undef double
++#undef MIN
++#undef MAX
++#include <limits.h>
++
++UWtype
++__fixunsxfSI (XFtype a)
++{
++ if (a >= - (DFtype) Wtype_MIN)
++ return (Wtype) (a + Wtype_MIN) - Wtype_MIN;
++ return (Wtype) a;
++}
++#endif
++
++#ifdef L_fixunsdfsi
++/* Reenable the normal types, in case limits.h needs them. */
++#undef char
++#undef short
++#undef int
++#undef long
++#undef unsigned
++#undef float
++#undef double
++#undef MIN
++#undef MAX
++#include <limits.h>
++
++UWtype
++__fixunsdfSI (DFtype a)
++{
++ if (a >= - (DFtype) Wtype_MIN)
++ return (Wtype) (a + Wtype_MIN) - Wtype_MIN;
++ return (Wtype) a;
++}
++#endif
++
++#ifdef L_fixunssfsi
++/* Reenable the normal types, in case limits.h needs them. */
++#undef char
++#undef short
++#undef int
++#undef long
++#undef unsigned
++#undef float
++#undef double
++#undef MIN
++#undef MAX
++#include <limits.h>
++
++UWtype
++__fixunssfSI (SFtype a)
++{
++ if (a >= - (SFtype) Wtype_MIN)
++ return (Wtype) (a + Wtype_MIN) - Wtype_MIN;
++ return (Wtype) a;
++}
++#endif
++\f
++/* From here on down, the routines use normal data types. */
++
++#define SItype bogus_type
++#define USItype bogus_type
++#define DItype bogus_type
++#define UDItype bogus_type
++#define SFtype bogus_type
++#define DFtype bogus_type
++#undef Wtype
++#undef UWtype
++#undef HWtype
++#undef UHWtype
++#undef DWtype
++#undef UDWtype
++
++#undef char
++#undef short
++#undef int
++#undef long
++#undef unsigned
++#undef float
++#undef double
++\f
++#ifdef L__gcc_bcmp
++
++/* Like bcmp except the sign is meaningful.
++ Result is negative if S1 is less than S2,
++ positive if S1 is greater, 0 if S1 and S2 are equal. */
++
++int
++__gcc_bcmp (const unsigned char *s1, const unsigned char *s2, size_t size)
++{
++ while (size > 0)
++ {
++ const unsigned char c1 = *s1++, c2 = *s2++;
++ if (c1 != c2)
++ return c1 - c2;
++ size--;
++ }
++ return 0;
++}
++
++#endif
++\f
++/* __eprintf used to be used by GCC's private version of <assert.h>.
++ We no longer provide that header, but this routine remains in libgcc.a
++ for binary backward compatibility. Note that it is not included in
++ the shared version of libgcc. */
++#ifdef L_eprintf
++#ifndef inhibit_libc
++
++#undef NULL /* Avoid errors if stdio.h and our stddef.h mismatch. */
++#include <stdio.h>
++
++void
++__eprintf (const char *string, const char *expression,
++ unsigned int line, const char *filename)
++{
++ fprintf (stderr, string, expression, line, filename);
++ fflush (stderr);
++ abort ();
++}
++
++#endif
++#endif
++
++\f
++#ifdef L_clear_cache
++/* Clear part of an instruction cache. */
++
++void
++__clear_cache (char *beg __attribute__((__unused__)),
++ char *end __attribute__((__unused__)))
++{
++#ifdef CLEAR_INSN_CACHE
++ CLEAR_INSN_CACHE (beg, end);
++#endif /* CLEAR_INSN_CACHE */
++}
++
++#endif /* L_clear_cache */
++\f
++#ifdef L_trampoline
++
++/* Jump to a trampoline, loading the static chain address. */
++
++#if defined(WINNT) && ! defined(__CYGWIN__) && ! defined (_UWIN)
++
++long
++getpagesize (void)
++{
++#ifdef _ALPHA_
++ return 8192;
++#else
++ return 4096;
++#endif
++}
++
++#ifdef __i386__
++extern int VirtualProtect (char *, int, int, int *) __attribute__((stdcall));
++#endif
++
++int
++mprotect (char *addr, int len, int prot)
++{
++ int np, op;
++
++ if (prot == 7)
++ np = 0x40;
++ else if (prot == 5)
++ np = 0x20;
++ else if (prot == 4)
++ np = 0x10;
++ else if (prot == 3)
++ np = 0x04;
++ else if (prot == 1)
++ np = 0x02;
++ else if (prot == 0)
++ np = 0x01;
++
++ if (VirtualProtect (addr, len, np, &op))
++ return 0;
++ else
++ return -1;
++}
++
++#endif /* WINNT && ! __CYGWIN__ && ! _UWIN */
++
++#ifdef TRANSFER_FROM_TRAMPOLINE
++TRANSFER_FROM_TRAMPOLINE
++#endif
++#endif /* L_trampoline */
++\f
++#ifndef __CYGWIN__
++#ifdef L__main
++
++#include "gbl-ctors.h"
++/* Some systems use __main in a way incompatible with its use in gcc, in these
++ cases use the macros NAME__MAIN to give a quoted symbol and SYMBOL__MAIN to
++ give the same symbol without quotes for an alternative entry point. You
++ must define both, or neither. */
++#ifndef NAME__MAIN
++#define NAME__MAIN "__main"
++#define SYMBOL__MAIN __main
++#endif
++
++#ifdef INIT_SECTION_ASM_OP
++#undef HAS_INIT_SECTION
++#define HAS_INIT_SECTION
++#endif
++
++#if !defined (HAS_INIT_SECTION) || !defined (OBJECT_FORMAT_ELF)
++
++/* Some ELF crosses use crtstuff.c to provide __CTOR_LIST__, but use this
++ code to run constructors. In that case, we need to handle EH here, too. */
++
++#ifdef EH_FRAME_SECTION_NAME
++#include "unwind-dw2-fde.h"
++extern unsigned char __EH_FRAME_BEGIN__[];
++#endif
++
++/* Run all the global destructors on exit from the program. */
++
++void
++__do_global_dtors (void)
++{
++#ifdef DO_GLOBAL_DTORS_BODY
++ DO_GLOBAL_DTORS_BODY;
++#else
++ static func_ptr *p = __DTOR_LIST__ + 1;
++ while (*p)
++ {
++ p++;
++ (*(p-1)) ();
++ }
++#endif
++#if defined (EH_FRAME_SECTION_NAME) && !defined (HAS_INIT_SECTION)
++ {
++ static int completed = 0;
++ if (! completed)
++ {
++ completed = 1;
++ __deregister_frame_info (__EH_FRAME_BEGIN__);
++ }
++ }
++#endif
++}
++#endif
++
++#ifndef HAS_INIT_SECTION
++/* Run all the global constructors on entry to the program. */
++
++void
++__do_global_ctors (void)
++{
++#ifdef EH_FRAME_SECTION_NAME
++ {
++ static struct object object;
++ __register_frame_info (__EH_FRAME_BEGIN__, &object);
++ }
++#endif
++ DO_GLOBAL_CTORS_BODY;
++ atexit (__do_global_dtors);
++}
++#endif /* no HAS_INIT_SECTION */
++
++#if !defined (HAS_INIT_SECTION) || defined (INVOKE__main)
++/* Subroutine called automatically by `main'.
++ Compiling a global function named `main'
++ produces an automatic call to this function at the beginning.
++
++ For many systems, this routine calls __do_global_ctors.
++ For systems which support a .init section we use the .init section
++ to run __do_global_ctors, so we need not do anything here. */
++
++extern void SYMBOL__MAIN (void);
++void
++SYMBOL__MAIN (void)
++{
++ /* Support recursive calls to `main': run initializers just once. */
++ static int initialized;
++ if (! initialized)
++ {
++ initialized = 1;
++ __do_global_ctors ();
++ }
++}
++#endif /* no HAS_INIT_SECTION or INVOKE__main */
++
++#endif /* L__main */
++#endif /* __CYGWIN__ */
++\f
++#ifdef L_ctors
++
++#include "gbl-ctors.h"
++
++/* Provide default definitions for the lists of constructors and
++ destructors, so that we don't get linker errors. These symbols are
++ intentionally bss symbols, so that gld and/or collect will provide
++ the right values. */
++
++/* We declare the lists here with two elements each,
++ so that they are valid empty lists if no other definition is loaded.
++
++ If we are using the old "set" extensions to have the gnu linker
++ collect ctors and dtors, then we __CTOR_LIST__ and __DTOR_LIST__
++ must be in the bss/common section.
++
++ Long term no port should use those extensions. But many still do. */
++#if !defined(INIT_SECTION_ASM_OP) && !defined(CTOR_LISTS_DEFINED_EXTERNALLY)
++#if defined (TARGET_ASM_CONSTRUCTOR) || defined (USE_COLLECT2)
++func_ptr __CTOR_LIST__[2] = {0, 0};
++func_ptr __DTOR_LIST__[2] = {0, 0};
++#else
++func_ptr __CTOR_LIST__[2];
++func_ptr __DTOR_LIST__[2];
++#endif
++#endif /* no INIT_SECTION_ASM_OP and not CTOR_LISTS_DEFINED_EXTERNALLY */
++#endif /* L_ctors */
++
+--- ./gcc/gcc/libgcc2.h
++++ ./gcc/gcc/libgcc2.h
+@@ -0,0 +1,310 @@
++/* Header file for libgcc2.c. */
++/* Copyright (C) 2000, 2001
++ Free Software Foundation, Inc.
++
++This file is part of GCC.
++
++GCC is free software; you can redistribute it and/or modify it under
++the terms of the GNU General Public License as published by the Free
++Software Foundation; either version 2, or (at your option) any later
++version.
++
++GCC is distributed in the hope that it will be useful, but WITHOUT ANY
++WARRANTY; without even the implied warranty of MERCHANTABILITY or
++FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++for more details.
++
++You should have received a copy of the GNU General Public License
++along with GCC; see the file COPYING. If not, write to the Free
++Software Foundation, 59 Temple Place - Suite 330, Boston, MA
++02111-1307, USA. */
++
++/* As a special exception, if you link this library with other files,
++ some of which are compiled with GCC, to produce an executable,
++ this library does not by itself cause the resulting executable
++ to be covered by the GNU General Public License.
++ This exception does not however invalidate any other reasons why
++ the executable file might be covered by the GNU General Public License. */
++
++
++#ifndef GCC_LIBGCC2_H
++#define GCC_LIBGCC2_H
++
++extern int __gcc_bcmp (const unsigned char *, const unsigned char *, size_t);
++extern void __clear_cache (char *, char *);
++extern void __eprintf (const char *, const char *, unsigned int, const char *)
++ __attribute__ ((__noreturn__));
++
++struct exception_descriptor;
++extern short int __get_eh_table_language (struct exception_descriptor *);
++extern short int __get_eh_table_version (struct exception_descriptor *);
++
++/* Permit the tm.h file to select the endianness to use just for this
++ file. This is used when the endianness is determined when the
++ compiler is run. */
++
++#ifndef LIBGCC2_WORDS_BIG_ENDIAN
++#define LIBGCC2_WORDS_BIG_ENDIAN WORDS_BIG_ENDIAN
++#endif
++
++#ifndef LIBGCC2_LONG_DOUBLE_TYPE_SIZE
++#define LIBGCC2_LONG_DOUBLE_TYPE_SIZE LONG_DOUBLE_TYPE_SIZE
++#endif
++
++#ifndef MIN_UNITS_PER_WORD
++#define MIN_UNITS_PER_WORD UNITS_PER_WORD
++#endif
++
++/* In the first part of this file, we are interfacing to calls generated
++ by the compiler itself. These calls pass values into these routines
++ which have very specific modes (rather than very specific types), and
++ these compiler-generated calls also expect any return values to have
++ very specific modes (rather than very specific types). Thus, we need
++ to avoid using regular C language type names in this part of the file
++ because the sizes for those types can be configured to be anything.
++ Instead we use the following special type names. */
++
++typedef int QItype __attribute__ ((mode (QI)));
++typedef unsigned int UQItype __attribute__ ((mode (QI)));
++typedef int HItype __attribute__ ((mode (HI)));
++typedef unsigned int UHItype __attribute__ ((mode (HI)));
++#if MIN_UNITS_PER_WORD > 1
++/* These typedefs are usually forbidden on dsp's with UNITS_PER_WORD 1. */
++typedef int SItype __attribute__ ((mode (SI)));
++typedef unsigned int USItype __attribute__ ((mode (SI)));
++#if LONG_LONG_TYPE_SIZE > 32
++/* These typedefs are usually forbidden on archs with UNITS_PER_WORD 2. */
++typedef int DItype __attribute__ ((mode (DI)));
++typedef unsigned int UDItype __attribute__ ((mode (DI)));
++#if MIN_UNITS_PER_WORD > 4
++/* These typedefs are usually forbidden on archs with UNITS_PER_WORD 4. */
++typedef int TItype __attribute__ ((mode (TI)));
++typedef unsigned int UTItype __attribute__ ((mode (TI)));
++#endif
++#endif
++#endif
++
++#if BITS_PER_UNIT == 8
++
++typedef float SFtype __attribute__ ((mode (SF)));
++typedef float DFtype __attribute__ ((mode (DF)));
++
++#if LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 96
++typedef float XFtype __attribute__ ((mode (XF)));
++#endif
++#if LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 128
++typedef float TFtype __attribute__ ((mode (TF)));
++#endif
++
++#else /* BITS_PER_UNIT != 8 */
++
++/* On dsp's there are usually qf/hf/tqf modes used instead of the above.
++ For now we don't support them in libgcc2.c. */
++
++#undef L_fixdfdi
++#undef L_fixsfdi
++#undef L_fixtfdi
++#undef L_fixunsdfdi
++#undef L_fixunsdfsi
++#undef L_fixunssfdi
++#undef L_fixunssfsi
++#undef L_fixunstfdi
++#undef L_fixunsxfdi
++#undef L_fixunsxfsi
++#undef L_fixxfdi
++#undef L_floatdidf
++#undef L_floatdisf
++#undef L_floatditf
++#undef L_floatdixf
++
++#endif /* BITS_PER_UNIT != 8 */
++
++typedef int word_type __attribute__ ((mode (__word__)));
++
++/* Make sure that we don't accidentally use any normal C language built-in
++ type names in the first part of this file. Instead we want to use *only*
++ the type names defined above. The following macro definitions insure
++ that if we *do* accidentally use some normal C language built-in type name,
++ we will get a syntax error. */
++
++#define char bogus_type
++#define short bogus_type
++#define int bogus_type
++#define long bogus_type
++#define unsigned bogus_type
++#define float bogus_type
++#define double bogus_type
++
++#if MIN_UNITS_PER_WORD > 4
++#define W_TYPE_SIZE (8 * BITS_PER_UNIT)
++#define Wtype DItype
++#define UWtype UDItype
++#define HWtype DItype
++#define UHWtype UDItype
++#define DWtype TItype
++#define UDWtype UTItype
++#define __NW(a,b) __ ## a ## di ## b
++#define __NDW(a,b) __ ## a ## ti ## b
++#elif MIN_UNITS_PER_WORD > 2 \
++ || (MIN_UNITS_PER_WORD > 1 && LONG_LONG_TYPE_SIZE > 32)
++#define W_TYPE_SIZE (4 * BITS_PER_UNIT)
++#define Wtype SItype
++#define UWtype USItype
++#define HWtype SItype
++#define UHWtype USItype
++#define DWtype DItype
++#define UDWtype UDItype
++#define __NW(a,b) __ ## a ## si ## b
++#define __NDW(a,b) __ ## a ## di ## b
++#elif MIN_UNITS_PER_WORD > 1
++#define W_TYPE_SIZE (2 * BITS_PER_UNIT)
++#define Wtype HItype
++#define UWtype UHItype
++#define HWtype HItype
++#define UHWtype UHItype
++#define DWtype SItype
++#define UDWtype USItype
++#define __NW(a,b) __ ## a ## hi ## b
++#define __NDW(a,b) __ ## a ## si ## b
++#else
++#define W_TYPE_SIZE BITS_PER_UNIT
++#define Wtype QItype
++#define UWtype UQItype
++#define HWtype QItype
++#define UHWtype UQItype
++#define DWtype HItype
++#define UDWtype UHItype
++#define __NW(a,b) __ ## a ## qi ## b
++#define __NDW(a,b) __ ## a ## hi ## b
++#endif
++
++#define Wtype_MAX ((Wtype)(((UWtype)1 << (W_TYPE_SIZE - 1)) - 1))
++#define Wtype_MIN (- Wtype_MAX - 1)
++
++#define __muldi3 __NDW(mul,3)
++#define __divdi3 __NDW(div,3)
++#define __udivdi3 __NDW(udiv,3)
++#define __moddi3 __NDW(mod,3)
++#define __umoddi3 __NDW(umod,3)
++#define __negdi2 __NDW(neg,2)
++#define __lshrdi3 __NDW(lshr,3)
++#define __ashldi3 __NDW(ashl,3)
++#define __ashrdi3 __NDW(ashr,3)
++#define __cmpdi2 __NDW(cmp,2)
++#define __ucmpdi2 __NDW(ucmp,2)
++#define __udivmoddi4 __NDW(udivmod,4)
++#define __fixunstfDI __NDW(fixunstf,)
++#define __fixtfdi __NDW(fixtf,)
++#define __fixunsxfDI __NDW(fixunsxf,)
++#define __fixxfdi __NDW(fixxf,)
++#define __fixunsdfDI __NDW(fixunsdf,)
++#define __fixdfdi __NDW(fixdf,)
++#define __fixunssfDI __NDW(fixunssf,)
++#define __fixsfdi __NDW(fixsf,)
++#define __floatdixf __NDW(float,xf)
++#define __floatditf __NDW(float,tf)
++#define __floatdidf __NDW(float,df)
++#define __floatdisf __NDW(float,sf)
++#define __fixunsxfSI __NW(fixunsxf,)
++#define __fixunstfSI __NW(fixunstf,)
++#define __fixunsdfSI __NW(fixunsdf,)
++#define __fixunssfSI __NW(fixunssf,)
++
++#define __ffsSI2 __NW(ffs,2)
++#define __clzSI2 __NW(clz,2)
++#define __ctzSI2 __NW(ctz,2)
++#define __popcountSI2 __NW(popcount,2)
++#define __paritySI2 __NW(parity,2)
++#define __ffsDI2 __NDW(ffs,2)
++#define __clzDI2 __NDW(clz,2)
++#define __ctzDI2 __NDW(ctz,2)
++#define __popcountDI2 __NDW(popcount,2)
++#define __parityDI2 __NDW(parity,2)
++
++extern DWtype __muldi3 (DWtype, DWtype);
++extern DWtype __divdi3 (DWtype, DWtype);
++extern UDWtype __udivdi3 (UDWtype, UDWtype);
++extern UDWtype __umoddi3 (UDWtype, UDWtype);
++extern DWtype __moddi3 (DWtype, DWtype);
++
++/* __udivmoddi4 is static inline when building other libgcc2 portions. */
++#if (!defined (L_udivdi3) && !defined (L_divdi3) && \
++ !defined (L_umoddi3) && !defined (L_moddi3))
++extern UDWtype __udivmoddi4 (UDWtype, UDWtype, UDWtype *);
++#endif
++
++/* __negdi2 is static inline when building other libgcc2 portions. */
++#if !defined(L_divdi3) && !defined(L_moddi3)
++extern DWtype __negdi2 (DWtype);
++#endif
++
++extern DWtype __lshrdi3 (DWtype, word_type);
++extern DWtype __ashldi3 (DWtype, word_type);
++extern DWtype __ashrdi3 (DWtype, word_type);
++
++/* __udiv_w_sdiv is static inline when building other libgcc2 portions. */
++#if (!defined(L_udivdi3) && !defined(L_divdi3) && \
++ !defined(L_umoddi3) && !defined(L_moddi3))
++extern UWtype __udiv_w_sdiv (UWtype *, UWtype, UWtype, UWtype);
++#endif
++
++extern word_type __cmpdi2 (DWtype, DWtype);
++extern word_type __ucmpdi2 (DWtype, DWtype);
++
++extern Wtype __absvsi2 (Wtype);
++extern DWtype __absvdi2 (DWtype);
++extern Wtype __addvsi3 (Wtype, Wtype);
++extern DWtype __addvdi3 (DWtype, DWtype);
++extern Wtype __subvsi3 (Wtype, Wtype);
++extern DWtype __subvdi3 (DWtype, DWtype);
++extern Wtype __mulvsi3 (Wtype, Wtype);
++extern DWtype __mulvdi3 (DWtype, DWtype);
++extern Wtype __negvsi2 (Wtype);
++extern DWtype __negvdi2 (DWtype);
++
++#if BITS_PER_UNIT == 8
++extern DWtype __fixdfdi (DFtype);
++extern DWtype __fixsfdi (SFtype);
++extern DFtype __floatdidf (DWtype);
++extern SFtype __floatdisf (DWtype);
++extern UWtype __fixunsdfSI (DFtype);
++extern UWtype __fixunssfSI (SFtype);
++extern DWtype __fixunsdfDI (DFtype);
++extern DWtype __fixunssfDI (SFtype);
++
++#if LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 96
++extern DWtype __fixxfdi (XFtype);
++extern DWtype __fixunsxfDI (XFtype);
++extern XFtype __floatdixf (DWtype);
++extern UWtype __fixunsxfSI (XFtype);
++#endif
++
++#if LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 128
++extern DWtype __fixunstfDI (TFtype);
++extern DWtype __fixtfdi (TFtype);
++extern TFtype __floatditf (DWtype);
++#endif
++#endif /* BITS_PER_UNIT == 8 */
++
++/* DWstructs are pairs of Wtype values in the order determined by
++ LIBGCC2_WORDS_BIG_ENDIAN. */
++
++#if LIBGCC2_WORDS_BIG_ENDIAN
++ struct DWstruct {Wtype high, low;};
++#else
++ struct DWstruct {Wtype low, high;};
++#endif
++
++/* We need this union to unpack/pack DImode values, since we don't have
++ any arithmetic yet. Incoming DImode parameters are stored into the
++ `ll' field, and the unpacked result is read from the struct `s'. */
++
++typedef union
++{
++ struct DWstruct s;
++ DWtype ll;
++} DWunion;
++
++#include "longlong.h"
++
++#endif /* ! GCC_LIBGCC2_H */
+--- ./gcc/gcc/longlong.h
++++ ./gcc/gcc/longlong.h
+@@ -0,0 +1,1360 @@
++/* longlong.h -- definitions for mixed size 32/64 bit arithmetic.
++ Copyright (C) 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000
++ Free Software Foundation, Inc.
++
++ This definition file is free software; you can redistribute it
++ and/or modify it under the terms of the GNU General Public
++ License as published by the Free Software Foundation; either
++ version 2, or (at your option) any later version.
++
++ This definition file is distributed in the hope that it will be
++ useful, but WITHOUT ANY WARRANTY; without even the implied
++ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
++ See the GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 59 Temple Place - Suite 330,
++ Boston, MA 02111-1307, USA. */
++
++/* You have to define the following before including this file:
++
++ UWtype -- An unsigned type, default type for operations (typically a "word")
++ UHWtype -- An unsigned type, at least half the size of UWtype.
++ UDWtype -- An unsigned type, at least twice as large a UWtype
++ W_TYPE_SIZE -- size in bits of UWtype
++
++ UQItype -- Unsigned 8 bit type.
++ SItype, USItype -- Signed and unsigned 32 bit types.
++ DItype, UDItype -- Signed and unsigned 64 bit types.
++
++ On a 32 bit machine UWtype should typically be USItype;
++ on a 64 bit machine, UWtype should typically be UDItype.
++*/
++
++#define __BITS4 (W_TYPE_SIZE / 4)
++#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
++#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
++#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
++
++#ifndef W_TYPE_SIZE
++#define W_TYPE_SIZE 32
++#define UWtype USItype
++#define UHWtype USItype
++#define UDWtype UDItype
++#endif
++
++/* Define auxiliary asm macros.
++
++ 1) umul_ppmm(high_prod, low_prod, multipler, multiplicand) multiplies two
++ UWtype integers MULTIPLER and MULTIPLICAND, and generates a two UWtype
++ word product in HIGH_PROD and LOW_PROD.
++
++ 2) __umulsidi3(a,b) multiplies two UWtype integers A and B, and returns a
++ UDWtype product. This is just a variant of umul_ppmm.
++
++ 3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
++ denominator) divides a UDWtype, composed by the UWtype integers
++ HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and places the quotient
++ in QUOTIENT and the remainder in REMAINDER. HIGH_NUMERATOR must be less
++ than DENOMINATOR for correct operation. If, in addition, the most
++ significant bit of DENOMINATOR must be 1, then the pre-processor symbol
++ UDIV_NEEDS_NORMALIZATION is defined to 1.
++
++ 4) sdiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
++ denominator). Like udiv_qrnnd but the numbers are signed. The quotient
++ is rounded towards 0.
++
++ 5) count_leading_zeros(count, x) counts the number of zero-bits from the
++ msb to the first nonzero bit in the UWtype X. This is the number of
++ steps X needs to be shifted left to set the msb. Undefined for X == 0,
++ unless the symbol COUNT_LEADING_ZEROS_0 is defined to some value.
++
++ 6) count_trailing_zeros(count, x) like count_leading_zeros, but counts
++ from the least significant end.
++
++ 7) add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1,
++ high_addend_2, low_addend_2) adds two UWtype integers, composed by
++ HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and LOW_ADDEND_2
++ respectively. The result is placed in HIGH_SUM and LOW_SUM. Overflow
++ (i.e. carry out) is not stored anywhere, and is lost.
++
++ 8) sub_ddmmss(high_difference, low_difference, high_minuend, low_minuend,
++ high_subtrahend, low_subtrahend) subtracts two two-word UWtype integers,
++ composed by HIGH_MINUEND_1 and LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and
++ LOW_SUBTRAHEND_2 respectively. The result is placed in HIGH_DIFFERENCE
++ and LOW_DIFFERENCE. Overflow (i.e. carry out) is not stored anywhere,
++ and is lost.
++
++ If any of these macros are left undefined for a particular CPU,
++ C macros are used. */
++
++/* The CPUs come in alphabetical order below.
++
++ Please add support for more CPUs here, or improve the current support
++ for the CPUs below!
++ (E.g. WE32100, IBM360.) */
++
++#if defined (__GNUC__) && !defined (NO_ASM)
++
++/* We sometimes need to clobber "cc" with gcc2, but that would not be
++ understood by gcc1. Use cpp to avoid major code duplication. */
++#if __GNUC__ < 2
++#define __CLOBBER_CC
++#define __AND_CLOBBER_CC
++#else /* __GNUC__ >= 2 */
++#define __CLOBBER_CC : "cc"
++#define __AND_CLOBBER_CC , "cc"
++#endif /* __GNUC__ < 2 */
++
++#if defined (__alpha) && W_TYPE_SIZE == 64
++#define umul_ppmm(ph, pl, m0, m1) \
++ do { \
++ UDItype __m0 = (m0), __m1 = (m1); \
++ (ph) = __builtin_alpha_umulh (__m0, __m1); \
++ (pl) = __m0 * __m1; \
++ } while (0)
++#define UMUL_TIME 46
++#ifndef LONGLONG_STANDALONE
++#define udiv_qrnnd(q, r, n1, n0, d) \
++ do { UDItype __r; \
++ (q) = __udiv_qrnnd (&__r, (n1), (n0), (d)); \
++ (r) = __r; \
++ } while (0)
++extern UDItype __udiv_qrnnd (UDItype *, UDItype, UDItype, UDItype);
++#define UDIV_TIME 220
++#endif /* LONGLONG_STANDALONE */
++#ifdef __alpha_cix__
++#define count_leading_zeros(COUNT,X) ((COUNT) = __builtin_clzl (X))
++#define count_trailing_zeros(COUNT,X) ((COUNT) = __builtin_ctzl (X))
++#define COUNT_LEADING_ZEROS_0 64
++#else
++extern const UQItype __clz_tab[] ATTRIBUTE_HIDDEN;
++#define count_leading_zeros(COUNT,X) \
++ do { \
++ UDItype __xr = (X), __t, __a; \
++ __t = __builtin_alpha_cmpbge (0, __xr); \
++ __a = __clz_tab[__t ^ 0xff] - 1; \
++ __t = __builtin_alpha_extbl (__xr, __a); \
++ (COUNT) = 64 - (__clz_tab[__t] + __a*8); \
++ } while (0)
++#define count_trailing_zeros(COUNT,X) \
++ do { \
++ UDItype __xr = (X), __t, __a; \
++ __t = __builtin_alpha_cmpbge (0, __xr); \
++ __t = ~__t & -~__t; \
++ __a = ((__t & 0xCC) != 0) * 2; \
++ __a += ((__t & 0xF0) != 0) * 4; \
++ __a += ((__t & 0xAA) != 0); \
++ __t = __builtin_alpha_extbl (__xr, __a); \
++ __a <<= 3; \
++ __t &= -__t; \
++ __a += ((__t & 0xCC) != 0) * 2; \
++ __a += ((__t & 0xF0) != 0) * 4; \
++ __a += ((__t & 0xAA) != 0); \
++ (COUNT) = __a; \
++ } while (0)
++#endif /* __alpha_cix__ */
++#endif /* __alpha */
++
++#if defined (__arc__) && W_TYPE_SIZE == 32
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ __asm__ ("add.f %1, %4, %5\n\tadc %0, %2, %3" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "%r" ((USItype) (ah)), \
++ "rIJ" ((USItype) (bh)), \
++ "%r" ((USItype) (al)), \
++ "rIJ" ((USItype) (bl)))
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ __asm__ ("sub.f %1, %4, %5\n\tsbc %0, %2, %3" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "r" ((USItype) (ah)), \
++ "rIJ" ((USItype) (bh)), \
++ "r" ((USItype) (al)), \
++ "rIJ" ((USItype) (bl)))
++/* Call libgcc routine. */
++#define umul_ppmm(w1, w0, u, v) \
++do { \
++ DWunion __w; \
++ __w.ll = __umulsidi3 (u, v); \
++ w1 = __w.s.high; \
++ w0 = __w.s.low; \
++} while (0)
++#define __umulsidi3 __umulsidi3
++UDItype __umulsidi3 (USItype, USItype);
++#endif
++
++#if defined (__arm__) && W_TYPE_SIZE == 32
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ __asm__ ("adds %1, %4, %5\n\tadc %0, %2, %3" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "%r" ((USItype) (ah)), \
++ "rI" ((USItype) (bh)), \
++ "%r" ((USItype) (al)), \
++ "rI" ((USItype) (bl)))
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ __asm__ ("subs %1, %4, %5\n\tsbc %0, %2, %3" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "r" ((USItype) (ah)), \
++ "rI" ((USItype) (bh)), \
++ "r" ((USItype) (al)), \
++ "rI" ((USItype) (bl)))
++#define umul_ppmm(xh, xl, a, b) \
++{register USItype __t0, __t1, __t2; \
++ __asm__ ("%@ Inlined umul_ppmm\n" \
++ " mov %2, %5, lsr #16\n" \
++ " mov %0, %6, lsr #16\n" \
++ " bic %3, %5, %2, lsl #16\n" \
++ " bic %4, %6, %0, lsl #16\n" \
++ " mul %1, %3, %4\n" \
++ " mul %4, %2, %4\n" \
++ " mul %3, %0, %3\n" \
++ " mul %0, %2, %0\n" \
++ " adds %3, %4, %3\n" \
++ " addcs %0, %0, #65536\n" \
++ " adds %1, %1, %3, lsl #16\n" \
++ " adc %0, %0, %3, lsr #16" \
++ : "=&r" ((USItype) (xh)), \
++ "=r" ((USItype) (xl)), \
++ "=&r" (__t0), "=&r" (__t1), "=r" (__t2) \
++ : "r" ((USItype) (a)), \
++ "r" ((USItype) (b)));}
++#define UMUL_TIME 20
++#define UDIV_TIME 100
++#endif /* __arm__ */
++
++#if defined (__hppa) && W_TYPE_SIZE == 32
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ __asm__ ("add %4,%5,%1\n\taddc %2,%3,%0" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "%rM" ((USItype) (ah)), \
++ "rM" ((USItype) (bh)), \
++ "%rM" ((USItype) (al)), \
++ "rM" ((USItype) (bl)))
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ __asm__ ("sub %4,%5,%1\n\tsubb %2,%3,%0" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "rM" ((USItype) (ah)), \
++ "rM" ((USItype) (bh)), \
++ "rM" ((USItype) (al)), \
++ "rM" ((USItype) (bl)))
++#if defined (_PA_RISC1_1)
++#define umul_ppmm(w1, w0, u, v) \
++ do { \
++ union \
++ { \
++ UDItype __f; \
++ struct {USItype __w1, __w0;} __w1w0; \
++ } __t; \
++ __asm__ ("xmpyu %1,%2,%0" \
++ : "=x" (__t.__f) \
++ : "x" ((USItype) (u)), \
++ "x" ((USItype) (v))); \
++ (w1) = __t.__w1w0.__w1; \
++ (w0) = __t.__w1w0.__w0; \
++ } while (0)
++#define UMUL_TIME 8
++#else
++#define UMUL_TIME 30
++#endif
++#define UDIV_TIME 40
++#define count_leading_zeros(count, x) \
++ do { \
++ USItype __tmp; \
++ __asm__ ( \
++ "ldi 1,%0\n" \
++" extru,= %1,15,16,%%r0 ; Bits 31..16 zero?\n" \
++" extru,tr %1,15,16,%1 ; No. Shift down, skip add.\n"\
++" ldo 16(%0),%0 ; Yes. Perform add.\n" \
++" extru,= %1,23,8,%%r0 ; Bits 15..8 zero?\n" \
++" extru,tr %1,23,8,%1 ; No. Shift down, skip add.\n"\
++" ldo 8(%0),%0 ; Yes. Perform add.\n" \
++" extru,= %1,27,4,%%r0 ; Bits 7..4 zero?\n" \
++" extru,tr %1,27,4,%1 ; No. Shift down, skip add.\n"\
++" ldo 4(%0),%0 ; Yes. Perform add.\n" \
++" extru,= %1,29,2,%%r0 ; Bits 3..2 zero?\n" \
++" extru,tr %1,29,2,%1 ; No. Shift down, skip add.\n"\
++" ldo 2(%0),%0 ; Yes. Perform add.\n" \
++" extru %1,30,1,%1 ; Extract bit 1.\n" \
++" sub %0,%1,%0 ; Subtract it.\n" \
++ : "=r" (count), "=r" (__tmp) : "1" (x)); \
++ } while (0)
++#endif
++
++#if (defined (__i370__) || defined (__s390__) || defined (__mvs__)) && W_TYPE_SIZE == 32
++#define smul_ppmm(xh, xl, m0, m1) \
++ do { \
++ union {DItype __ll; \
++ struct {USItype __h, __l;} __i; \
++ } __x; \
++ __asm__ ("lr %N0,%1\n\tmr %0,%2" \
++ : "=&r" (__x.__ll) \
++ : "r" (m0), "r" (m1)); \
++ (xh) = __x.__i.__h; (xl) = __x.__i.__l; \
++ } while (0)
++#define sdiv_qrnnd(q, r, n1, n0, d) \
++ do { \
++ union {DItype __ll; \
++ struct {USItype __h, __l;} __i; \
++ } __x; \
++ __x.__i.__h = n1; __x.__i.__l = n0; \
++ __asm__ ("dr %0,%2" \
++ : "=r" (__x.__ll) \
++ : "0" (__x.__ll), "r" (d)); \
++ (q) = __x.__i.__l; (r) = __x.__i.__h; \
++ } while (0)
++#endif
++
++#if (defined (__i386__) || defined (__i486__)) && W_TYPE_SIZE == 32
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ __asm__ ("addl %5,%1\n\tadcl %3,%0" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "%0" ((USItype) (ah)), \
++ "g" ((USItype) (bh)), \
++ "%1" ((USItype) (al)), \
++ "g" ((USItype) (bl)))
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ __asm__ ("subl %5,%1\n\tsbbl %3,%0" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "0" ((USItype) (ah)), \
++ "g" ((USItype) (bh)), \
++ "1" ((USItype) (al)), \
++ "g" ((USItype) (bl)))
++#define umul_ppmm(w1, w0, u, v) \
++ __asm__ ("mull %3" \
++ : "=a" ((USItype) (w0)), \
++ "=d" ((USItype) (w1)) \
++ : "%0" ((USItype) (u)), \
++ "rm" ((USItype) (v)))
++#define udiv_qrnnd(q, r, n1, n0, dv) \
++ __asm__ ("divl %4" \
++ : "=a" ((USItype) (q)), \
++ "=d" ((USItype) (r)) \
++ : "0" ((USItype) (n0)), \
++ "1" ((USItype) (n1)), \
++ "rm" ((USItype) (dv)))
++#define count_leading_zeros(count, x) \
++ do { \
++ USItype __cbtmp; \
++ __asm__ ("bsrl %1,%0" \
++ : "=r" (__cbtmp) : "rm" ((USItype) (x))); \
++ (count) = __cbtmp ^ 31; \
++ } while (0)
++#define count_trailing_zeros(count, x) \
++ __asm__ ("bsfl %1,%0" : "=r" (count) : "rm" ((USItype)(x)))
++#define UMUL_TIME 40
++#define UDIV_TIME 40
++#endif /* 80x86 */
++
++#if defined (__i960__) && W_TYPE_SIZE == 32
++#define umul_ppmm(w1, w0, u, v) \
++ ({union {UDItype __ll; \
++ struct {USItype __l, __h;} __i; \
++ } __xx; \
++ __asm__ ("emul %2,%1,%0" \
++ : "=d" (__xx.__ll) \
++ : "%dI" ((USItype) (u)), \
++ "dI" ((USItype) (v))); \
++ (w1) = __xx.__i.__h; (w0) = __xx.__i.__l;})
++#define __umulsidi3(u, v) \
++ ({UDItype __w; \
++ __asm__ ("emul %2,%1,%0" \
++ : "=d" (__w) \
++ : "%dI" ((USItype) (u)), \
++ "dI" ((USItype) (v))); \
++ __w; })
++#endif /* __i960__ */
++
++#if defined (__M32R__) && W_TYPE_SIZE == 32
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ /* The cmp clears the condition bit. */ \
++ __asm__ ("cmp %0,%0\n\taddx %1,%5\n\taddx %0,%3" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "0" ((USItype) (ah)), \
++ "r" ((USItype) (bh)), \
++ "1" ((USItype) (al)), \
++ "r" ((USItype) (bl)) \
++ : "cbit")
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ /* The cmp clears the condition bit. */ \
++ __asm__ ("cmp %0,%0\n\tsubx %1,%5\n\tsubx %0,%3" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "0" ((USItype) (ah)), \
++ "r" ((USItype) (bh)), \
++ "1" ((USItype) (al)), \
++ "r" ((USItype) (bl)) \
++ : "cbit")
++#endif /* __M32R__ */
++
++#if defined (__mc68000__) && W_TYPE_SIZE == 32
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ __asm__ ("add%.l %5,%1\n\taddx%.l %3,%0" \
++ : "=d" ((USItype) (sh)), \
++ "=&d" ((USItype) (sl)) \
++ : "%0" ((USItype) (ah)), \
++ "d" ((USItype) (bh)), \
++ "%1" ((USItype) (al)), \
++ "g" ((USItype) (bl)))
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ __asm__ ("sub%.l %5,%1\n\tsubx%.l %3,%0" \
++ : "=d" ((USItype) (sh)), \
++ "=&d" ((USItype) (sl)) \
++ : "0" ((USItype) (ah)), \
++ "d" ((USItype) (bh)), \
++ "1" ((USItype) (al)), \
++ "g" ((USItype) (bl)))
++
++/* The '020, '030, '040 and CPU32 have 32x32->64 and 64/32->32q-32r. */
++#if defined (__mc68020__) || defined(mc68020) \
++ || defined(__mc68030__) || defined(mc68030) \
++ || defined(__mc68040__) || defined(mc68040) \
++ || defined(__mcpu32__) || defined(mcpu32)
++#define umul_ppmm(w1, w0, u, v) \
++ __asm__ ("mulu%.l %3,%1:%0" \
++ : "=d" ((USItype) (w0)), \
++ "=d" ((USItype) (w1)) \
++ : "%0" ((USItype) (u)), \
++ "dmi" ((USItype) (v)))
++#define UMUL_TIME 45
++#define udiv_qrnnd(q, r, n1, n0, d) \
++ __asm__ ("divu%.l %4,%1:%0" \
++ : "=d" ((USItype) (q)), \
++ "=d" ((USItype) (r)) \
++ : "0" ((USItype) (n0)), \
++ "1" ((USItype) (n1)), \
++ "dmi" ((USItype) (d)))
++#define UDIV_TIME 90
++#define sdiv_qrnnd(q, r, n1, n0, d) \
++ __asm__ ("divs%.l %4,%1:%0" \
++ : "=d" ((USItype) (q)), \
++ "=d" ((USItype) (r)) \
++ : "0" ((USItype) (n0)), \
++ "1" ((USItype) (n1)), \
++ "dmi" ((USItype) (d)))
++
++#else /* not mc68020 */
++#if defined(__mcoldfire__)
++#define umul_ppmm(xh, xl, a, b) \
++ __asm__ ("| Inlined umul_ppmm\n" \
++ " move%.l %2,%/d0\n" \
++ " move%.l %3,%/d1\n" \
++ " move%.l %/d0,%/d2\n" \
++ " swap %/d0\n" \
++ " move%.l %/d1,%/d3\n" \
++ " swap %/d1\n" \
++ " move%.w %/d2,%/d4\n" \
++ " mulu %/d3,%/d4\n" \
++ " mulu %/d1,%/d2\n" \
++ " mulu %/d0,%/d3\n" \
++ " mulu %/d0,%/d1\n" \
++ " move%.l %/d4,%/d0\n" \
++ " clr%.w %/d0\n" \
++ " swap %/d0\n" \
++ " add%.l %/d0,%/d2\n" \
++ " add%.l %/d3,%/d2\n" \
++ " jcc 1f\n" \
++ " add%.l %#65536,%/d1\n" \
++ "1: swap %/d2\n" \
++ " moveq %#0,%/d0\n" \
++ " move%.w %/d2,%/d0\n" \
++ " move%.w %/d4,%/d2\n" \
++ " move%.l %/d2,%1\n" \
++ " add%.l %/d1,%/d0\n" \
++ " move%.l %/d0,%0" \
++ : "=g" ((USItype) (xh)), \
++ "=g" ((USItype) (xl)) \
++ : "g" ((USItype) (a)), \
++ "g" ((USItype) (b)) \
++ : "d0", "d1", "d2", "d3", "d4")
++#define UMUL_TIME 100
++#define UDIV_TIME 400
++#else /* not ColdFire */
++/* %/ inserts REGISTER_PREFIX, %# inserts IMMEDIATE_PREFIX. */
++#define umul_ppmm(xh, xl, a, b) \
++ __asm__ ("| Inlined umul_ppmm\n" \
++ " move%.l %2,%/d0\n" \
++ " move%.l %3,%/d1\n" \
++ " move%.l %/d0,%/d2\n" \
++ " swap %/d0\n" \
++ " move%.l %/d1,%/d3\n" \
++ " swap %/d1\n" \
++ " move%.w %/d2,%/d4\n" \
++ " mulu %/d3,%/d4\n" \
++ " mulu %/d1,%/d2\n" \
++ " mulu %/d0,%/d3\n" \
++ " mulu %/d0,%/d1\n" \
++ " move%.l %/d4,%/d0\n" \
++ " eor%.w %/d0,%/d0\n" \
++ " swap %/d0\n" \
++ " add%.l %/d0,%/d2\n" \
++ " add%.l %/d3,%/d2\n" \
++ " jcc 1f\n" \
++ " add%.l %#65536,%/d1\n" \
++ "1: swap %/d2\n" \
++ " moveq %#0,%/d0\n" \
++ " move%.w %/d2,%/d0\n" \
++ " move%.w %/d4,%/d2\n" \
++ " move%.l %/d2,%1\n" \
++ " add%.l %/d1,%/d0\n" \
++ " move%.l %/d0,%0" \
++ : "=g" ((USItype) (xh)), \
++ "=g" ((USItype) (xl)) \
++ : "g" ((USItype) (a)), \
++ "g" ((USItype) (b)) \
++ : "d0", "d1", "d2", "d3", "d4")
++#define UMUL_TIME 100
++#define UDIV_TIME 400
++#endif /* not ColdFire */
++#endif /* not mc68020 */
++
++/* The '020, '030, '040 and '060 have bitfield insns.
++ cpu32 disguises as a 68020, but lacks them. */
++#if ( defined (__mc68020__) || defined(mc68020) \
++ || defined(__mc68030__) || defined(mc68030) \
++ || defined(__mc68040__) || defined(mc68040) \
++ || defined(__mc68060__) || defined(mc68060) ) \
++ && !defined(__mcpu32__)
++#define count_leading_zeros(count, x) \
++ __asm__ ("bfffo %1{%b2:%b2},%0" \
++ : "=d" ((USItype) (count)) \
++ : "od" ((USItype) (x)), "n" (0))
++#endif
++#endif /* mc68000 */
++
++#if defined (__m88000__) && W_TYPE_SIZE == 32
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ __asm__ ("addu.co %1,%r4,%r5\n\taddu.ci %0,%r2,%r3" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "%rJ" ((USItype) (ah)), \
++ "rJ" ((USItype) (bh)), \
++ "%rJ" ((USItype) (al)), \
++ "rJ" ((USItype) (bl)))
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ __asm__ ("subu.co %1,%r4,%r5\n\tsubu.ci %0,%r2,%r3" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "rJ" ((USItype) (ah)), \
++ "rJ" ((USItype) (bh)), \
++ "rJ" ((USItype) (al)), \
++ "rJ" ((USItype) (bl)))
++#define count_leading_zeros(count, x) \
++ do { \
++ USItype __cbtmp; \
++ __asm__ ("ff1 %0,%1" \
++ : "=r" (__cbtmp) \
++ : "r" ((USItype) (x))); \
++ (count) = __cbtmp ^ 31; \
++ } while (0)
++#define COUNT_LEADING_ZEROS_0 63 /* sic */
++#if defined (__mc88110__)
++#define umul_ppmm(wh, wl, u, v) \
++ do { \
++ union {UDItype __ll; \
++ struct {USItype __h, __l;} __i; \
++ } __xx; \
++ __asm__ ("mulu.d %0,%1,%2" \
++ : "=r" (__xx.__ll) \
++ : "r" ((USItype) (u)), \
++ "r" ((USItype) (v))); \
++ (wh) = __xx.__i.__h; \
++ (wl) = __xx.__i.__l; \
++ } while (0)
++#define udiv_qrnnd(q, r, n1, n0, d) \
++ ({union {UDItype __ll; \
++ struct {USItype __h, __l;} __i; \
++ } __xx; \
++ USItype __q; \
++ __xx.__i.__h = (n1); __xx.__i.__l = (n0); \
++ __asm__ ("divu.d %0,%1,%2" \
++ : "=r" (__q) \
++ : "r" (__xx.__ll), \
++ "r" ((USItype) (d))); \
++ (r) = (n0) - __q * (d); (q) = __q; })
++#define UMUL_TIME 5
++#define UDIV_TIME 25
++#else
++#define UMUL_TIME 17
++#define UDIV_TIME 150
++#endif /* __mc88110__ */
++#endif /* __m88000__ */
++
++#if defined (__mips__) && W_TYPE_SIZE == 32
++#define umul_ppmm(w1, w0, u, v) \
++ __asm__ ("multu %2,%3" \
++ : "=l" ((USItype) (w0)), \
++ "=h" ((USItype) (w1)) \
++ : "d" ((USItype) (u)), \
++ "d" ((USItype) (v)))
++#define UMUL_TIME 10
++#define UDIV_TIME 100
++#endif /* __mips__ */
++
++#if defined (__ns32000__) && W_TYPE_SIZE == 32
++#define umul_ppmm(w1, w0, u, v) \
++ ({union {UDItype __ll; \
++ struct {USItype __l, __h;} __i; \
++ } __xx; \
++ __asm__ ("meid %2,%0" \
++ : "=g" (__xx.__ll) \
++ : "%0" ((USItype) (u)), \
++ "g" ((USItype) (v))); \
++ (w1) = __xx.__i.__h; (w0) = __xx.__i.__l;})
++#define __umulsidi3(u, v) \
++ ({UDItype __w; \
++ __asm__ ("meid %2,%0" \
++ : "=g" (__w) \
++ : "%0" ((USItype) (u)), \
++ "g" ((USItype) (v))); \
++ __w; })
++#define udiv_qrnnd(q, r, n1, n0, d) \
++ ({union {UDItype __ll; \
++ struct {USItype __l, __h;} __i; \
++ } __xx; \
++ __xx.__i.__h = (n1); __xx.__i.__l = (n0); \
++ __asm__ ("deid %2,%0" \
++ : "=g" (__xx.__ll) \
++ : "0" (__xx.__ll), \
++ "g" ((USItype) (d))); \
++ (r) = __xx.__i.__l; (q) = __xx.__i.__h; })
++#define count_trailing_zeros(count,x) \
++ do { \
++ __asm__ ("ffsd %2,%0" \
++ : "=r" ((USItype) (count)) \
++ : "0" ((USItype) 0), \
++ "r" ((USItype) (x))); \
++ } while (0)
++#endif /* __ns32000__ */
++
++/* FIXME: We should test _IBMR2 here when we add assembly support for the
++ system vendor compilers.
++ FIXME: What's needed for gcc PowerPC VxWorks? __vxworks__ is not good
++ enough, since that hits ARM and m68k too. */
++#if (defined (_ARCH_PPC) /* AIX */ \
++ || defined (_ARCH_PWR) /* AIX */ \
++ || defined (_ARCH_COM) /* AIX */ \
++ || defined (__powerpc__) /* gcc */ \
++ || defined (__POWERPC__) /* BEOS */ \
++ || defined (__ppc__) /* Darwin */ \
++ || defined (PPC) /* GNU/Linux, SysV */ \
++ ) && W_TYPE_SIZE == 32
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ do { \
++ if (__builtin_constant_p (bh) && (bh) == 0) \
++ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2" \
++ : "=r" (sh), "=&r" (sl) : "r" (ah), "%r" (al), "rI" (bl));\
++ else if (__builtin_constant_p (bh) && (bh) == ~(USItype) 0) \
++ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2" \
++ : "=r" (sh), "=&r" (sl) : "r" (ah), "%r" (al), "rI" (bl));\
++ else \
++ __asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3" \
++ : "=r" (sh), "=&r" (sl) \
++ : "%r" (ah), "r" (bh), "%r" (al), "rI" (bl)); \
++ } while (0)
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ do { \
++ if (__builtin_constant_p (ah) && (ah) == 0) \
++ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2" \
++ : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl));\
++ else if (__builtin_constant_p (ah) && (ah) == ~(USItype) 0) \
++ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2" \
++ : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl));\
++ else if (__builtin_constant_p (bh) && (bh) == 0) \
++ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2" \
++ : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl));\
++ else if (__builtin_constant_p (bh) && (bh) == ~(USItype) 0) \
++ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2" \
++ : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl));\
++ else \
++ __asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2" \
++ : "=r" (sh), "=&r" (sl) \
++ : "r" (ah), "r" (bh), "rI" (al), "r" (bl)); \
++ } while (0)
++#define count_leading_zeros(count, x) \
++ __asm__ ("{cntlz|cntlzw} %0,%1" : "=r" (count) : "r" (x))
++#define COUNT_LEADING_ZEROS_0 32
++#if defined (_ARCH_PPC) || defined (__powerpc__) || defined (__POWERPC__) \
++ || defined (__ppc__) || defined (PPC)
++#define umul_ppmm(ph, pl, m0, m1) \
++ do { \
++ USItype __m0 = (m0), __m1 = (m1); \
++ __asm__ ("mulhwu %0,%1,%2" : "=r" (ph) : "%r" (m0), "r" (m1)); \
++ (pl) = __m0 * __m1; \
++ } while (0)
++#define UMUL_TIME 15
++#define smul_ppmm(ph, pl, m0, m1) \
++ do { \
++ SItype __m0 = (m0), __m1 = (m1); \
++ __asm__ ("mulhw %0,%1,%2" : "=r" (ph) : "%r" (m0), "r" (m1)); \
++ (pl) = __m0 * __m1; \
++ } while (0)
++#define SMUL_TIME 14
++#define UDIV_TIME 120
++#elif defined (_ARCH_PWR)
++#define UMUL_TIME 8
++#define smul_ppmm(xh, xl, m0, m1) \
++ __asm__ ("mul %0,%2,%3" : "=r" (xh), "=q" (xl) : "r" (m0), "r" (m1))
++#define SMUL_TIME 4
++#define sdiv_qrnnd(q, r, nh, nl, d) \
++ __asm__ ("div %0,%2,%4" : "=r" (q), "=q" (r) : "r" (nh), "1" (nl), "r" (d))
++#define UDIV_TIME 100
++#endif
++#endif /* 32-bit POWER architecture variants. */
++
++/* We should test _IBMR2 here when we add assembly support for the system
++ vendor compilers. */
++#if (defined (_ARCH_PPC64) || defined (__powerpc64__)) && W_TYPE_SIZE == 64
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ do { \
++ if (__builtin_constant_p (bh) && (bh) == 0) \
++ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2" \
++ : "=r" (sh), "=&r" (sl) : "r" (ah), "%r" (al), "rI" (bl));\
++ else if (__builtin_constant_p (bh) && (bh) == ~(UDItype) 0) \
++ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2" \
++ : "=r" (sh), "=&r" (sl) : "r" (ah), "%r" (al), "rI" (bl));\
++ else \
++ __asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3" \
++ : "=r" (sh), "=&r" (sl) \
++ : "%r" (ah), "r" (bh), "%r" (al), "rI" (bl)); \
++ } while (0)
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ do { \
++ if (__builtin_constant_p (ah) && (ah) == 0) \
++ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2" \
++ : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl));\
++ else if (__builtin_constant_p (ah) && (ah) == ~(UDItype) 0) \
++ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2" \
++ : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl));\
++ else if (__builtin_constant_p (bh) && (bh) == 0) \
++ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2" \
++ : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl));\
++ else if (__builtin_constant_p (bh) && (bh) == ~(UDItype) 0) \
++ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2" \
++ : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl));\
++ else \
++ __asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2" \
++ : "=r" (sh), "=&r" (sl) \
++ : "r" (ah), "r" (bh), "rI" (al), "r" (bl)); \
++ } while (0)
++#define count_leading_zeros(count, x) \
++ __asm__ ("cntlzd %0,%1" : "=r" (count) : "r" (x))
++#define COUNT_LEADING_ZEROS_0 64
++#define umul_ppmm(ph, pl, m0, m1) \
++ do { \
++ UDItype __m0 = (m0), __m1 = (m1); \
++ __asm__ ("mulhdu %0,%1,%2" : "=r" (ph) : "%r" (m0), "r" (m1)); \
++ (pl) = __m0 * __m1; \
++ } while (0)
++#define UMUL_TIME 15
++#define smul_ppmm(ph, pl, m0, m1) \
++ do { \
++ DItype __m0 = (m0), __m1 = (m1); \
++ __asm__ ("mulhd %0,%1,%2" : "=r" (ph) : "%r" (m0), "r" (m1)); \
++ (pl) = __m0 * __m1; \
++ } while (0)
++#define SMUL_TIME 14 /* ??? */
++#define UDIV_TIME 120 /* ??? */
++#endif /* 64-bit PowerPC. */
++
++#if defined (__ibm032__) /* RT/ROMP */ && W_TYPE_SIZE == 32
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ __asm__ ("a %1,%5\n\tae %0,%3" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "%0" ((USItype) (ah)), \
++ "r" ((USItype) (bh)), \
++ "%1" ((USItype) (al)), \
++ "r" ((USItype) (bl)))
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ __asm__ ("s %1,%5\n\tse %0,%3" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "0" ((USItype) (ah)), \
++ "r" ((USItype) (bh)), \
++ "1" ((USItype) (al)), \
++ "r" ((USItype) (bl)))
++#define umul_ppmm(ph, pl, m0, m1) \
++ do { \
++ USItype __m0 = (m0), __m1 = (m1); \
++ __asm__ ( \
++ "s r2,r2\n" \
++" mts r10,%2\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" m r2,%3\n" \
++" cas %0,r2,r0\n" \
++" mfs r10,%1" \
++ : "=r" ((USItype) (ph)), \
++ "=r" ((USItype) (pl)) \
++ : "%r" (__m0), \
++ "r" (__m1) \
++ : "r2"); \
++ (ph) += ((((SItype) __m0 >> 31) & __m1) \
++ + (((SItype) __m1 >> 31) & __m0)); \
++ } while (0)
++#define UMUL_TIME 20
++#define UDIV_TIME 200
++#define count_leading_zeros(count, x) \
++ do { \
++ if ((x) >= 0x10000) \
++ __asm__ ("clz %0,%1" \
++ : "=r" ((USItype) (count)) \
++ : "r" ((USItype) (x) >> 16)); \
++ else \
++ { \
++ __asm__ ("clz %0,%1" \
++ : "=r" ((USItype) (count)) \
++ : "r" ((USItype) (x))); \
++ (count) += 16; \
++ } \
++ } while (0)
++#endif
++
++#if defined (__sh2__) && W_TYPE_SIZE == 32
++#define umul_ppmm(w1, w0, u, v) \
++ __asm__ ( \
++ "dmulu.l %2,%3\n\tsts macl,%1\n\tsts mach,%0" \
++ : "=r" ((USItype)(w1)), \
++ "=r" ((USItype)(w0)) \
++ : "r" ((USItype)(u)), \
++ "r" ((USItype)(v)) \
++ : "macl", "mach")
++#define UMUL_TIME 5
++#endif
++
++#if defined (__SH5__) && __SHMEDIA__ && W_TYPE_SIZE == 32
++#define __umulsidi3(u,v) ((UDItype)(USItype)u*(USItype)v)
++#define count_leading_zeros(count, x) \
++ do \
++ { \
++ UDItype x_ = (USItype)(x); \
++ SItype c_; \
++ \
++ __asm__ ("nsb %1, %0" : "=r" (c_) : "r" (x_)); \
++ (count) = c_ - 31; \
++ } \
++ while (0)
++#define COUNT_LEADING_ZEROS_0 32
++#endif
++
++#if defined (__sparc__) && !defined (__arch64__) && !defined (__sparcv9) \
++ && W_TYPE_SIZE == 32
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ __asm__ ("addcc %r4,%5,%1\n\taddx %r2,%3,%0" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "%rJ" ((USItype) (ah)), \
++ "rI" ((USItype) (bh)), \
++ "%rJ" ((USItype) (al)), \
++ "rI" ((USItype) (bl)) \
++ __CLOBBER_CC)
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ __asm__ ("subcc %r4,%5,%1\n\tsubx %r2,%3,%0" \
++ : "=r" ((USItype) (sh)), \
++ "=&r" ((USItype) (sl)) \
++ : "rJ" ((USItype) (ah)), \
++ "rI" ((USItype) (bh)), \
++ "rJ" ((USItype) (al)), \
++ "rI" ((USItype) (bl)) \
++ __CLOBBER_CC)
++#if defined (__sparc_v8__)
++#define umul_ppmm(w1, w0, u, v) \
++ __asm__ ("umul %2,%3,%1;rd %%y,%0" \
++ : "=r" ((USItype) (w1)), \
++ "=r" ((USItype) (w0)) \
++ : "r" ((USItype) (u)), \
++ "r" ((USItype) (v)))
++#define udiv_qrnnd(__q, __r, __n1, __n0, __d) \
++ __asm__ ("mov %2,%%y;nop;nop;nop;udiv %3,%4,%0;umul %0,%4,%1;sub %3,%1,%1"\
++ : "=&r" ((USItype) (__q)), \
++ "=&r" ((USItype) (__r)) \
++ : "r" ((USItype) (__n1)), \
++ "r" ((USItype) (__n0)), \
++ "r" ((USItype) (__d)))
++#else
++#if defined (__sparclite__)
++/* This has hardware multiply but not divide. It also has two additional
++ instructions scan (ffs from high bit) and divscc. */
++#define umul_ppmm(w1, w0, u, v) \
++ __asm__ ("umul %2,%3,%1;rd %%y,%0" \
++ : "=r" ((USItype) (w1)), \
++ "=r" ((USItype) (w0)) \
++ : "r" ((USItype) (u)), \
++ "r" ((USItype) (v)))
++#define udiv_qrnnd(q, r, n1, n0, d) \
++ __asm__ ("! Inlined udiv_qrnnd\n" \
++" wr %%g0,%2,%%y ! Not a delayed write for sparclite\n" \
++" tst %%g0\n" \
++" divscc %3,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%%g1\n" \
++" divscc %%g1,%4,%0\n" \
++" rd %%y,%1\n" \
++" bl,a 1f\n" \
++" add %1,%4,%1\n" \
++"1: ! End of inline udiv_qrnnd" \
++ : "=r" ((USItype) (q)), \
++ "=r" ((USItype) (r)) \
++ : "r" ((USItype) (n1)), \
++ "r" ((USItype) (n0)), \
++ "rI" ((USItype) (d)) \
++ : "g1" __AND_CLOBBER_CC)
++#define UDIV_TIME 37
++#define count_leading_zeros(count, x) \
++ do { \
++ __asm__ ("scan %1,1,%0" \
++ : "=r" ((USItype) (count)) \
++ : "r" ((USItype) (x))); \
++ } while (0)
++/* Early sparclites return 63 for an argument of 0, but they warn that future
++ implementations might change this. Therefore, leave COUNT_LEADING_ZEROS_0
++ undefined. */
++#else
++/* SPARC without integer multiplication and divide instructions.
++ (i.e. at least Sun4/20,40,60,65,75,110,260,280,330,360,380,470,490) */
++#define umul_ppmm(w1, w0, u, v) \
++ __asm__ ("! Inlined umul_ppmm\n" \
++" wr %%g0,%2,%%y ! SPARC has 0-3 delay insn after a wr\n"\
++" sra %3,31,%%o5 ! Don't move this insn\n" \
++" and %2,%%o5,%%o5 ! Don't move this insn\n" \
++" andcc %%g0,0,%%g1 ! Don't move this insn\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,%3,%%g1\n" \
++" mulscc %%g1,0,%%g1\n" \
++" add %%g1,%%o5,%0\n" \
++" rd %%y,%1" \
++ : "=r" ((USItype) (w1)), \
++ "=r" ((USItype) (w0)) \
++ : "%rI" ((USItype) (u)), \
++ "r" ((USItype) (v)) \
++ : "g1", "o5" __AND_CLOBBER_CC)
++#define UMUL_TIME 39 /* 39 instructions */
++/* It's quite necessary to add this much assembler for the sparc.
++ The default udiv_qrnnd (in C) is more than 10 times slower! */
++#define udiv_qrnnd(__q, __r, __n1, __n0, __d) \
++ __asm__ ("! Inlined udiv_qrnnd\n" \
++" mov 32,%%g1\n" \
++" subcc %1,%2,%%g0\n" \
++"1: bcs 5f\n" \
++" addxcc %0,%0,%0 ! shift n1n0 and a q-bit in lsb\n" \
++" sub %1,%2,%1 ! this kills msb of n\n" \
++" addx %1,%1,%1 ! so this can't give carry\n" \
++" subcc %%g1,1,%%g1\n" \
++"2: bne 1b\n" \
++" subcc %1,%2,%%g0\n" \
++" bcs 3f\n" \
++" addxcc %0,%0,%0 ! shift n1n0 and a q-bit in lsb\n" \
++" b 3f\n" \
++" sub %1,%2,%1 ! this kills msb of n\n" \
++"4: sub %1,%2,%1\n" \
++"5: addxcc %1,%1,%1\n" \
++" bcc 2b\n" \
++" subcc %%g1,1,%%g1\n" \
++"! Got carry from n. Subtract next step to cancel this carry.\n" \
++" bne 4b\n" \
++" addcc %0,%0,%0 ! shift n1n0 and a 0-bit in lsb\n" \
++" sub %1,%2,%1\n" \
++"3: xnor %0,0,%0\n" \
++" ! End of inline udiv_qrnnd" \
++ : "=&r" ((USItype) (__q)), \
++ "=&r" ((USItype) (__r)) \
++ : "r" ((USItype) (__d)), \
++ "1" ((USItype) (__n1)), \
++ "0" ((USItype) (__n0)) : "g1" __AND_CLOBBER_CC)
++#define UDIV_TIME (3+7*32) /* 7 instructions/iteration. 32 iterations. */
++#endif /* __sparclite__ */
++#endif /* __sparc_v8__ */
++#endif /* sparc32 */
++
++#if ((defined (__sparc__) && defined (__arch64__)) || defined (__sparcv9)) \
++ && W_TYPE_SIZE == 64
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ __asm__ ("addcc %r4,%5,%1\n\t" \
++ "add %r2,%3,%0\n\t" \
++ "bcs,a,pn %%xcc, 1f\n\t" \
++ "add %0, 1, %0\n" \
++ "1:" \
++ : "=r" ((UDItype)(sh)), \
++ "=&r" ((UDItype)(sl)) \
++ : "%rJ" ((UDItype)(ah)), \
++ "rI" ((UDItype)(bh)), \
++ "%rJ" ((UDItype)(al)), \
++ "rI" ((UDItype)(bl)) \
++ __CLOBBER_CC)
++
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ __asm__ ("subcc %r4,%5,%1\n\t" \
++ "sub %r2,%3,%0\n\t" \
++ "bcs,a,pn %%xcc, 1f\n\t" \
++ "sub %0, 1, %0\n\t" \
++ "1:" \
++ : "=r" ((UDItype)(sh)), \
++ "=&r" ((UDItype)(sl)) \
++ : "rJ" ((UDItype)(ah)), \
++ "rI" ((UDItype)(bh)), \
++ "rJ" ((UDItype)(al)), \
++ "rI" ((UDItype)(bl)) \
++ __CLOBBER_CC)
++
++#define umul_ppmm(wh, wl, u, v) \
++ do { \
++ UDItype tmp1, tmp2, tmp3, tmp4; \
++ __asm__ __volatile__ ( \
++ "srl %7,0,%3\n\t" \
++ "mulx %3,%6,%1\n\t" \
++ "srlx %6,32,%2\n\t" \
++ "mulx %2,%3,%4\n\t" \
++ "sllx %4,32,%5\n\t" \
++ "srl %6,0,%3\n\t" \
++ "sub %1,%5,%5\n\t" \
++ "srlx %5,32,%5\n\t" \
++ "addcc %4,%5,%4\n\t" \
++ "srlx %7,32,%5\n\t" \
++ "mulx %3,%5,%3\n\t" \
++ "mulx %2,%5,%5\n\t" \
++ "sethi %%hi(0x80000000),%2\n\t" \
++ "addcc %4,%3,%4\n\t" \
++ "srlx %4,32,%4\n\t" \
++ "add %2,%2,%2\n\t" \
++ "movcc %%xcc,%%g0,%2\n\t" \
++ "addcc %5,%4,%5\n\t" \
++ "sllx %3,32,%3\n\t" \
++ "add %1,%3,%1\n\t" \
++ "add %5,%2,%0" \
++ : "=r" ((UDItype)(wh)), \
++ "=&r" ((UDItype)(wl)), \
++ "=&r" (tmp1), "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4) \
++ : "r" ((UDItype)(u)), \
++ "r" ((UDItype)(v)) \
++ __CLOBBER_CC); \
++ } while (0)
++#define UMUL_TIME 96
++#define UDIV_TIME 230
++#endif /* sparc64 */
++
++#if defined (__vax__) && W_TYPE_SIZE == 32
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ __asm__ ("addl2 %5,%1\n\tadwc %3,%0" \
++ : "=g" ((USItype) (sh)), \
++ "=&g" ((USItype) (sl)) \
++ : "%0" ((USItype) (ah)), \
++ "g" ((USItype) (bh)), \
++ "%1" ((USItype) (al)), \
++ "g" ((USItype) (bl)))
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ __asm__ ("subl2 %5,%1\n\tsbwc %3,%0" \
++ : "=g" ((USItype) (sh)), \
++ "=&g" ((USItype) (sl)) \
++ : "0" ((USItype) (ah)), \
++ "g" ((USItype) (bh)), \
++ "1" ((USItype) (al)), \
++ "g" ((USItype) (bl)))
++#define umul_ppmm(xh, xl, m0, m1) \
++ do { \
++ union { \
++ UDItype __ll; \
++ struct {USItype __l, __h;} __i; \
++ } __xx; \
++ USItype __m0 = (m0), __m1 = (m1); \
++ __asm__ ("emul %1,%2,$0,%0" \
++ : "=r" (__xx.__ll) \
++ : "g" (__m0), \
++ "g" (__m1)); \
++ (xh) = __xx.__i.__h; \
++ (xl) = __xx.__i.__l; \
++ (xh) += ((((SItype) __m0 >> 31) & __m1) \
++ + (((SItype) __m1 >> 31) & __m0)); \
++ } while (0)
++#define sdiv_qrnnd(q, r, n1, n0, d) \
++ do { \
++ union {DItype __ll; \
++ struct {SItype __l, __h;} __i; \
++ } __xx; \
++ __xx.__i.__h = n1; __xx.__i.__l = n0; \
++ __asm__ ("ediv %3,%2,%0,%1" \
++ : "=g" (q), "=g" (r) \
++ : "g" (__xx.__ll), "g" (d)); \
++ } while (0)
++#endif /* __vax__ */
++
++#if defined (__z8000__) && W_TYPE_SIZE == 16
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ __asm__ ("add %H1,%H5\n\tadc %H0,%H3" \
++ : "=r" ((unsigned int)(sh)), \
++ "=&r" ((unsigned int)(sl)) \
++ : "%0" ((unsigned int)(ah)), \
++ "r" ((unsigned int)(bh)), \
++ "%1" ((unsigned int)(al)), \
++ "rQR" ((unsigned int)(bl)))
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ __asm__ ("sub %H1,%H5\n\tsbc %H0,%H3" \
++ : "=r" ((unsigned int)(sh)), \
++ "=&r" ((unsigned int)(sl)) \
++ : "0" ((unsigned int)(ah)), \
++ "r" ((unsigned int)(bh)), \
++ "1" ((unsigned int)(al)), \
++ "rQR" ((unsigned int)(bl)))
++#define umul_ppmm(xh, xl, m0, m1) \
++ do { \
++ union {long int __ll; \
++ struct {unsigned int __h, __l;} __i; \
++ } __xx; \
++ unsigned int __m0 = (m0), __m1 = (m1); \
++ __asm__ ("mult %S0,%H3" \
++ : "=r" (__xx.__i.__h), \
++ "=r" (__xx.__i.__l) \
++ : "%1" (__m0), \
++ "rQR" (__m1)); \
++ (xh) = __xx.__i.__h; (xl) = __xx.__i.__l; \
++ (xh) += ((((signed int) __m0 >> 15) & __m1) \
++ + (((signed int) __m1 >> 15) & __m0)); \
++ } while (0)
++#endif /* __z8000__ */
++
++#endif /* __GNUC__ */
++
++/* If this machine has no inline assembler, use C macros. */
++
++#if !defined (add_ssaaaa)
++#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
++ do { \
++ UWtype __x; \
++ __x = (al) + (bl); \
++ (sh) = (ah) + (bh) + (__x < (al)); \
++ (sl) = __x; \
++ } while (0)
++#endif
++
++#if !defined (sub_ddmmss)
++#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
++ do { \
++ UWtype __x; \
++ __x = (al) - (bl); \
++ (sh) = (ah) - (bh) - (__x > (al)); \
++ (sl) = __x; \
++ } while (0)
++#endif
++
++/* If we lack umul_ppmm but have smul_ppmm, define umul_ppmm in terms of
++ smul_ppmm. */
++#if !defined (umul_ppmm) && defined (smul_ppmm)
++#define umul_ppmm(w1, w0, u, v) \
++ do { \
++ UWtype __w1; \
++ UWtype __xm0 = (u), __xm1 = (v); \
++ smul_ppmm (__w1, w0, __xm0, __xm1); \
++ (w1) = __w1 + (-(__xm0 >> (W_TYPE_SIZE - 1)) & __xm1) \
++ + (-(__xm1 >> (W_TYPE_SIZE - 1)) & __xm0); \
++ } while (0)
++#endif
++
++/* If we still don't have umul_ppmm, define it using plain C. */
++#if !defined (umul_ppmm)
++#define umul_ppmm(w1, w0, u, v) \
++ do { \
++ UWtype __x0, __x1, __x2, __x3; \
++ UHWtype __ul, __vl, __uh, __vh; \
++ \
++ __ul = __ll_lowpart (u); \
++ __uh = __ll_highpart (u); \
++ __vl = __ll_lowpart (v); \
++ __vh = __ll_highpart (v); \
++ \
++ __x0 = (UWtype) __ul * __vl; \
++ __x1 = (UWtype) __ul * __vh; \
++ __x2 = (UWtype) __uh * __vl; \
++ __x3 = (UWtype) __uh * __vh; \
++ \
++ __x1 += __ll_highpart (__x0);/* this can't give carry */ \
++ __x1 += __x2; /* but this indeed can */ \
++ if (__x1 < __x2) /* did we get it? */ \
++ __x3 += __ll_B; /* yes, add it in the proper pos. */ \
++ \
++ (w1) = __x3 + __ll_highpart (__x1); \
++ (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
++ } while (0)
++#endif
++
++#if !defined (__umulsidi3)
++#define __umulsidi3(u, v) \
++ ({DWunion __w; \
++ umul_ppmm (__w.s.high, __w.s.low, u, v); \
++ __w.ll; })
++#endif
++
++/* Define this unconditionally, so it can be used for debugging. */
++#define __udiv_qrnnd_c(q, r, n1, n0, d) \
++ do { \
++ UWtype __d1, __d0, __q1, __q0; \
++ UWtype __r1, __r0, __m; \
++ __d1 = __ll_highpart (d); \
++ __d0 = __ll_lowpart (d); \
++ \
++ __r1 = (n1) % __d1; \
++ __q1 = (n1) / __d1; \
++ __m = (UWtype) __q1 * __d0; \
++ __r1 = __r1 * __ll_B | __ll_highpart (n0); \
++ if (__r1 < __m) \
++ { \
++ __q1--, __r1 += (d); \
++ if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
++ if (__r1 < __m) \
++ __q1--, __r1 += (d); \
++ } \
++ __r1 -= __m; \
++ \
++ __r0 = __r1 % __d1; \
++ __q0 = __r1 / __d1; \
++ __m = (UWtype) __q0 * __d0; \
++ __r0 = __r0 * __ll_B | __ll_lowpart (n0); \
++ if (__r0 < __m) \
++ { \
++ __q0--, __r0 += (d); \
++ if (__r0 >= (d)) \
++ if (__r0 < __m) \
++ __q0--, __r0 += (d); \
++ } \
++ __r0 -= __m; \
++ \
++ (q) = (UWtype) __q1 * __ll_B | __q0; \
++ (r) = __r0; \
++ } while (0)
++
++/* If the processor has no udiv_qrnnd but sdiv_qrnnd, go through
++ __udiv_w_sdiv (defined in libgcc or elsewhere). */
++#if !defined (udiv_qrnnd) && defined (sdiv_qrnnd)
++#define udiv_qrnnd(q, r, nh, nl, d) \
++ do { \
++ USItype __r; \
++ (q) = __udiv_w_sdiv (&__r, nh, nl, d); \
++ (r) = __r; \
++ } while (0)
++#endif
++
++/* If udiv_qrnnd was not defined for this processor, use __udiv_qrnnd_c. */
++#if !defined (udiv_qrnnd)
++#define UDIV_NEEDS_NORMALIZATION 1
++#define udiv_qrnnd __udiv_qrnnd_c
++#endif
++
++#if !defined (count_leading_zeros)
++extern const UQItype __clz_tab[] ATTRIBUTE_HIDDEN;
++#define count_leading_zeros(count, x) \
++ do { \
++ UWtype __xr = (x); \
++ UWtype __a; \
++ \
++ if (W_TYPE_SIZE <= 32) \
++ { \
++ __a = __xr < ((UWtype)1<<2*__BITS4) \
++ ? (__xr < ((UWtype)1<<__BITS4) ? 0 : __BITS4) \
++ : (__xr < ((UWtype)1<<3*__BITS4) ? 2*__BITS4 : 3*__BITS4); \
++ } \
++ else \
++ { \
++ for (__a = W_TYPE_SIZE - 8; __a > 0; __a -= 8) \
++ if (((__xr >> __a) & 0xff) != 0) \
++ break; \
++ } \
++ \
++ (count) = W_TYPE_SIZE - (__clz_tab[__xr >> __a] + __a); \
++ } while (0)
++#define COUNT_LEADING_ZEROS_0 W_TYPE_SIZE
++#endif
++
++#if !defined (count_trailing_zeros)
++/* Define count_trailing_zeros using count_leading_zeros. The latter might be
++ defined in asm, but if it is not, the C version above is good enough. */
++#define count_trailing_zeros(count, x) \
++ do { \
++ UWtype __ctz_x = (x); \
++ UWtype __ctz_c; \
++ count_leading_zeros (__ctz_c, __ctz_x & -__ctz_x); \
++ (count) = W_TYPE_SIZE - 1 - __ctz_c; \
++ } while (0)
++#endif
++
++#ifndef UDIV_NEEDS_NORMALIZATION
++#define UDIV_NEEDS_NORMALIZATION 0
++#endif
projects / patches.git / commitdiff