done<<>>dnl>>)
changequote([,]))])
+#serial 1
+# This test replaces the one in autoconf.
+# Currently this macro should have the same name as the autoconf macro
+# because gettext's gettext.m4 (distributed in the automake package)
+# still uses it. Otherwise, the use in gettext.m4 makes autoheader
+# give these diagnostics:
+# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
+# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
+
+undefine([AC_ISC_POSIX])
+
+AC_DEFUN([AC_ISC_POSIX],
+ [
+ dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
+ AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
+ ]
+)
+
# Configure paths for GLIB
# Owen Taylor 97-11-3
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
-# serial 5
-
-AC_DEFUN(AM_WITH_NLS,
+# serial 9
+
+dnl Usage: AM_WITH_NLS([TOOLSYMBOL], [NEEDSYMBOL], [LIBDIR]).
+dnl If TOOLSYMBOL is specified and is 'use-libtool', then a libtool library
+dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl depending on --{enable,disable}-{shared,static} and on the presence of
+dnl AM-DISABLE-SHARED). Otherwise, a static library
+dnl $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl implementations (in libc or libintl) without the ngettext() function
+dnl will be ignored.
+dnl LIBDIR is used to find the intl libraries. If empty,
+dnl the value `$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl and used.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl Catalog format: none
+dnl Catalog extension: none
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_WITH_NLS],
[AC_MSG_CHECKING([whether NLS is requested])
dnl Default is enabled NLS
AC_ARG_ENABLE(nls,
AC_MSG_RESULT($USE_NLS)
AC_SUBST(USE_NLS)
+ BUILD_INCLUDED_LIBINTL=no
USE_INCLUDED_LIBINTL=no
dnl If we use NLS figure out what method
if test "$USE_NLS" = "yes"; then
- AC_DEFINE(ENABLE_NLS)
+ AC_DEFINE(ENABLE_NLS, 1,
+ [Define to 1 if translation of program messages to the user's native language
+ is requested.])
AC_MSG_CHECKING([whether included gettext is requested])
AC_ARG_WITH(included-gettext,
[ --with-included-gettext use the GNU gettext library included here],
nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
dnl User does not insist on using GNU NLS library. Figure out what
- dnl to use. If gettext or catgets are available (in this order) we
- dnl use this. Else we have to fall back to GNU NLS library.
- dnl catgets is only used if permitted by option --with-catgets.
- nls_cv_header_intl=
- nls_cv_header_libgt=
+ dnl to use. If GNU gettext is available we use this. Else we have
+ dnl to fall back to GNU NLS library.
CATOBJEXT=NONE
+ dnl Add a version number to the cache macros.
+ define(gt_cv_func_gnugettext_libc, [gt_cv_func_gnugettext]ifelse([$2], need-ngettext, 2, 1)[_libc])
+ define(gt_cv_func_gnugettext_libintl, [gt_cv_func_gnugettext]ifelse([$2], need-ngettext, 2, 1)[_libintl])
+
AC_CHECK_HEADER(libintl.h,
- [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
- [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
- gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
-
- if test "$gt_cv_func_gettext_libc" != "yes"; then
- AC_CHECK_LIB(intl, bindtextdomain,
- [AC_CACHE_CHECK([for gettext in libintl],
- gt_cv_func_gettext_libintl,
- [AC_CHECK_LIB(intl, gettext,
- gt_cv_func_gettext_libintl=yes,
- gt_cv_func_gettext_libintl=no)],
- gt_cv_func_gettext_libintl=no)])
+ [AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc,
+ [AC_TRY_LINK([#include <libintl.h>
+extern int _nl_msg_cat_cntr;],
+ [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], need-ngettext, [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr],
+ gt_cv_func_gnugettext_libc=yes,
+ gt_cv_func_gnugettext_libc=no)])
+
+ if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+ AC_CACHE_CHECK([for GNU gettext in libintl],
+ gt_cv_func_gnugettext_libintl,
+ [gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -lintl"
+ AC_TRY_LINK([#include <libintl.h>
+extern int _nl_msg_cat_cntr;],
+ [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], need-ngettext, [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr],
+ gt_cv_func_gnugettext_libintl=yes,
+ gt_cv_func_gnugettext_libintl=no)
+ LIBS="$gt_save_LIBS"])
fi
- if test "$gt_cv_func_gettext_libc" = "yes" \
- || test "$gt_cv_func_gettext_libintl" = "yes"; then
- AC_DEFINE(HAVE_GETTEXT)
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
- if test "$MSGFMT" != "no"; then
- AC_CHECK_FUNCS(dcgettext)
- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
- return _nl_msg_cat_cntr],
- [CATOBJEXT=.gmo
- DATADIRNAME=share],
- [CATOBJEXT=.mo
- DATADIRNAME=lib])
- INSTOBJEXT=.mo
- fi
- fi
+ if test "$gt_cv_func_gnugettext_libc" = "yes" \
+ || test "$gt_cv_func_gnugettext_libintl" = "yes"; then
+ AC_DEFINE(HAVE_GETTEXT, 1,
+ [Define if the GNU gettext() function is already present or preinstalled.])
+ AC_CHECK_FUNCS(dcgettext)
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
+ if test "$MSGFMT" != "no"; then
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+ fi
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+ CATOBJEXT=.gmo
+ if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
+ INTLLIBS="-lintl"
+ fi
+ fi
])
if test "$CATOBJEXT" = "NONE"; then
- AC_MSG_CHECKING([whether catgets can be used])
- AC_ARG_WITH(catgets,
- [ --with-catgets use catgets functions if available],
- nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
- AC_MSG_RESULT($nls_cv_use_catgets)
-
- if test "$nls_cv_use_catgets" = "yes"; then
- dnl No gettext in C library. Try catgets next.
- AC_CHECK_LIB(i, main)
- AC_CHECK_FUNC(catgets,
- [AC_DEFINE(HAVE_CATGETS)
- INTLOBJS="\$(CATOBJS)"
- AC_PATH_PROG(GENCAT, gencat, no)dnl
- if test "$GENCAT" != "no"; then
- AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
- if test "$GMSGFMT" = "no"; then
- AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
- fi
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- USE_INCLUDED_LIBINTL=yes
- CATOBJEXT=.cat
- INSTOBJEXT=.cat
- DATADIRNAME=lib
- INTLDEPS='$(top_builddir)/intl/libintl.a'
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi])
- fi
- fi
-
- if test "$CATOBJEXT" = "NONE"; then
- dnl Neither gettext nor catgets in included in the C library.
+ dnl GNU gettext is not found in the C library.
dnl Fall back on GNU gettext library.
nls_cv_use_gnu_gettext=yes
fi
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_SUBST(MSGFMT)
+ BUILD_INCLUDED_LIBINTL=yes
USE_INCLUDED_LIBINTL=yes
CATOBJEXT=.gmo
- INSTOBJEXT=.mo
- DATADIRNAME=share
- INTLDEPS='$(top_builddir)/intl/libintl.a'
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
+ INTLLIBS='ifelse([$3],[],$(top_builddir)/intl,[$3])/libintl.ifelse([$1], use-libtool, [l], [])a'
+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+ fi
+
+ dnl If iconv() is in a separate libiconv library, then anyone linking
+ dnl with libintl{.a,.so} also needs to link with libiconv.
+ if test -n "$LIBICONV" && test -n "$INTLLIBS"; then
+ INTLLIBS="$INTLLIBS $LIBICONV"
fi
dnl Test whether we really found GNU xgettext.
fi
fi
- # We need to process the po/ directory.
+ dnl We need to process the po/ directory.
POSUB=po
- else
- DATADIRNAME=share
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
fi
- AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
AC_OUTPUT_COMMANDS(
- [case "$CONFIG_FILES" in *po/Makefile.in*)
+ [case " "$CONFIG_FILES" " in *" po/Makefile.in "* | *" po/Makefile.in:"*)
sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
+ ;;
esac])
- # If this is used in GNU gettext we have to set USE_NLS to `yes'
- # because some of the sources are only built for this goal.
+ dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+ dnl to 'yes' because some of the testsuite requires it.
if test "$PACKAGE" = gettext; then
- USE_NLS=yes
- USE_INCLUDED_LIBINTL=yes
+ BUILD_INCLUDED_LIBINTL=yes
+ fi
+
+ dnl intl/plural.c is generated from intl/plural.y. It requires bison,
+ dnl because plural.y uses bison specific features. It requires at least
+ dnl bison-1.26 because earlier versions generate a plural.c that doesn't
+ dnl compile.
+ dnl bison is only needed for the maintainer (who touches plural.y). But in
+ dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put
+ dnl the rule in general Makefile. Now, some people carelessly touch the
+ dnl files or have a broken "make" program, hence the plural.c rule will
+ dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not
+ dnl present or too old.
+ AC_CHECK_PROGS([INTLBISON], [bison])
+ if test -z "$INTLBISON"; then
+ ac_verc_fail=yes
+ else
+ dnl Found it, now check the version.
+ AC_MSG_CHECKING([version of bison])
+changequote(<<,>>)dnl
+ ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison .* \([0-9]*\.[0-9.]*\).*$/\1/p'`
+ case $ac_prog_version in
+ '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
+ 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
+changequote([,])dnl
+ ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
+ *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
+ esac
+ AC_MSG_RESULT([$ac_prog_version])
+ fi
+ if test $ac_verc_fail = yes; then
+ INTLBISON=:
fi
dnl These rules are solely for the distribution goal. While doing this
done
dnl Make all variables we use known to autoconf.
+ AC_SUBST(BUILD_INCLUDED_LIBINTL)
AC_SUBST(USE_INCLUDED_LIBINTL)
AC_SUBST(CATALOGS)
AC_SUBST(CATOBJEXT)
- AC_SUBST(DATADIRNAME)
AC_SUBST(GMOFILES)
- AC_SUBST(INSTOBJEXT)
- AC_SUBST(INTLDEPS)
AC_SUBST(INTLLIBS)
AC_SUBST(INTLOBJS)
AC_SUBST(POFILES)
AC_SUBST(POSUB)
+
+ dnl For backward compatibility. Some configure.ins may be using this.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ DATADIRNAME=share
+ AC_SUBST(DATADIRNAME)
])
-AC_DEFUN(AM_GNU_GETTEXT,
+dnl Usage: Just like AM_WITH_NLS, which see.
+AC_DEFUN([AM_GNU_GETTEXT],
[AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_ISC_POSIX])dnl
AC_REQUIRE([AC_HEADER_STDC])dnl
AC_REQUIRE([AC_FUNC_ALLOCA])dnl
AC_REQUIRE([AC_FUNC_MMAP])dnl
- AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h sys/param.h])
- AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
-strdup __argz_count __argz_stringify __argz_next])
-
- if test "${ac_cv_func_stpcpy+set}" != "set"; then
- AC_CHECK_FUNCS(stpcpy)
- fi
- if test "${ac_cv_func_stpcpy}" = "yes"; then
- AC_DEFINE(HAVE_STPCPY)
- fi
+ AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
+stdlib.h string.h unistd.h sys/param.h])
+ AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getcwd mempcpy munmap putenv \
+setenv setlocale stpcpy strchr strcasecmp strdup tsearch \
+__argz_count __argz_stringify __argz_next])
+ AM_ICONV
+ AM_LANGINFO_CODESET
AM_LC_MESSAGES
- AM_WITH_NLS
+ AM_WITH_NLS([$1],[$2],[$3])
if test "x$CATOBJEXT" != "x"; then
if test "x$ALL_LINGUAS" = "x"; then
else
AC_MSG_CHECKING(for catalogs to be installed)
NEW_LINGUAS=
- for lang in ${LINGUAS=$ALL_LINGUAS}; do
- case "$ALL_LINGUAS" in
- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
- esac
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ for desiredlang in ${LINGUAS-$ALL_LINGUAS}; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ NEW_LINGUAS="$NEW_LINGUAS $presentlang"
+ fi
done
LINGUAS=$NEW_LINGUAS
AC_MSG_RESULT($LINGUAS)
fi
fi
- dnl The reference to <locale.h> in the installed <libintl.h> file
- dnl must be resolved because we cannot expect the users of this
- dnl to define HAVE_LOCALE_H.
- if test $ac_cv_header_locale_h = yes; then
- INCLUDE_LOCALE_H="#include <locale.h>"
- else
- INCLUDE_LOCALE_H="\
-/* The system does not provide the header <locale.h>. Take care yourself. */"
- fi
- AC_SUBST(INCLUDE_LOCALE_H)
-
- dnl Determine which catalog format we have (if any is needed)
- dnl For now we know about two different formats:
- dnl Linux libc-5 and the normal X/Open format
- test -d intl || mkdir intl
- if test "$CATOBJEXT" = ".cat"; then
- AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
-
- dnl Transform the SED scripts while copying because some dumb SEDs
- dnl cannot handle comments.
- sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
- fi
- dnl po2tbl.sed is always needed.
- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
- $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
-
- dnl In the intl/Makefile.in we have a special dependency which makes
- dnl only sense for gettext. We comment this out for non-gettext
- dnl packages.
- if test "$PACKAGE" = "gettext"; then
- GT_NO="#NO#"
- GT_YES=
- else
- GT_NO=
- GT_YES="#YES#"
- fi
- AC_SUBST(GT_NO)
- AC_SUBST(GT_YES)
-
dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
- dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
+ dnl find the mkinstalldirs script in another subdir but $(top_srcdir).
dnl Try to locate is.
MKINSTALLDIRS=
if test -n "$ac_aux_dir"; then
fi
AC_SUBST(MKINSTALLDIRS)
- dnl *** For now the libtool support in intl/Makefile is not for real.
- l=
- AC_SUBST(l)
+ dnl Enable libtool support if the surrounding package wishes it.
+ INTL_LIBTOOL_SUFFIX_PREFIX=ifelse([$1], use-libtool, [l], [])
+ AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
dnl Generate list of files to be processed by xgettext which will
- dnl be included in po/Makefile.
- test -d po || mkdir po
- if test "x$srcdir" != "x."; then
- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
- posrcprefix="$srcdir/"
- else
- posrcprefix="../$srcdir/"
- fi
- else
- posrcprefix="../"
+ dnl be included in po/Makefile. But only do this if the po directory
+ dnl exists in srcdir.
+ if test -d $srcdir/po; then
+ test -d po || mkdir po
+ if test "x$srcdir" != "x."; then
+ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+ posrcprefix="$srcdir/"
+ else
+ posrcprefix="../$srcdir/"
+ fi
+ else
+ posrcprefix="../"
+ fi
+ rm -f po/POTFILES
+ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+ < $srcdir/po/POTFILES.in > po/POTFILES
fi
- rm -f po/POTFILES
- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
- < $srcdir/po/POTFILES.in > po/POTFILES
])
# Search path for a program which passes the given test.
dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(AM_PATH_PROG_WITH_TEST,
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_SUBST($1)dnl
])
+#serial AM1
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV],
+[
+ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+ dnl those with the standalone portable GNU libiconv installed).
+ AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_func_iconv=yes)
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS -liconv"
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes)
+ LIBS="$am_save_LIBS"
+ fi
+ ])
+ if test "$am_cv_func_iconv" = yes; then
+ AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
+ AC_MSG_CHECKING([for iconv declaration])
+ AC_CACHE_VAL(am_cv_proto_iconv, [
+ AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+ am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ AC_MSG_RESULT([$]{ac_t:-
+ }[$]am_cv_proto_iconv)
+ AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
+ [Define as const if the declaration of iconv() needs const.])
+ fi
+ LIBICONV=
+ if test "$am_cv_lib_iconv" = yes; then
+ LIBICONV="-liconv"
+ fi
+ AC_SUBST(LIBICONV)
+])
+
+#serial AM1
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_LANGINFO_CODESET],
+[
+ AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset,
+ [AC_TRY_LINK([#include <langinfo.h>],
+ [char* cs = nl_langinfo(CODESET);],
+ am_cv_langinfo_codeset=yes,
+ am_cv_langinfo_codeset=no)
+ ])
+ if test $am_cv_langinfo_codeset = yes; then
+ AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
+ [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
+ fi
+])
+
# Check whether LC_MESSAGES is available in <locale.h>.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
-# serial 1
+# serial 2
-AC_DEFUN(AM_LC_MESSAGES,
+AC_DEFUN([AM_LC_MESSAGES],
[if test $ac_cv_header_locale_h = yes; then
AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
[AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
if test $am_cv_val_LC_MESSAGES = yes; then
- AC_DEFINE(HAVE_LC_MESSAGES)
+ AC_DEFINE(HAVE_LC_MESSAGES, 1,
+ [Define if your <locale.h> file defines LC_MESSAGES.])
fi
fi])
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
- --enable-tiny Disables features for the sake of size
+ --enable-tiny Disable features for the sake of size
(currently disables detailed help and i18n)"
ac_help="$ac_help
--enable-extra Enable extra (optional) functions, including easter eggs"
ac_help="$ac_help
--enable-nanorc Enable use of .nanorc file"
ac_help="$ac_help
- --enable-color Enable color and syntax hilighting"
+ --enable-color Enable color and syntax highlighting"
ac_help="$ac_help
- --disable-tabcomp Disables tab completion code for a smaller binary"
+ --disable-tabcomp Disable tab completion code for a smaller binary"
ac_help="$ac_help
--disable-justify Disable justify/unjustify function"
ac_help="$ac_help
- --disable-speller Disables spell checker function"
+ --disable-speller Disable spell checker function"
ac_help="$ac_help
- --disable-help Disables help function (^G)"
+ --disable-help Disable help function (^G)"
ac_help="$ac_help
- --disable-browser Disables mini file browser"
+ --disable-browser Disable mini file browser"
ac_help="$ac_help
- --disable-wrapping Disables all wrapping of text (and -w flag)"
+ --disable-wrapping Disable all wrapping of text (and -w flag)"
ac_help="$ac_help
- --disable-mouse Disables mouse support (and -m flag)"
+ --disable-mouse Disable mouse support (and -m flag)"
ac_help="$ac_help
--with-slang[=DIR] Use the slang library instead of curses"
ac_help="$ac_help
--disable-nls do not use Native Language Support"
ac_help="$ac_help
--with-included-gettext use the GNU gettext library included here"
-ac_help="$ac_help
- --with-catgets use catgets functions if available"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:595: checking for a BSD compatible install" >&5
+echo "configure:593: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:648: checking whether build environment is sane" >&5
+echo "configure:646: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:705: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:703: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:751: checking for working aclocal" >&5
+echo "configure:749: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:764: checking for working autoconf" >&5
+echo "configure:762: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:777: checking for working automake" >&5
+echo "configure:775: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:790: checking for working autoheader" >&5
+echo "configure:788: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:803: checking for working makeinfo" >&5
+echo "configure:801: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:824: checking for $ac_word" >&5
+echo "configure:822: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:854: checking for $ac_word" >&5
+echo "configure:852: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:905: checking for $ac_word" >&5
+echo "configure:903: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:937: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:935: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 948 "configure"
+#line 946 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:953: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:951: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:979: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:977: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:984: checking whether we are using GNU C" >&5
+echo "configure:982: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:993: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:991: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1012: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1010: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
fi
-echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:1044: checking for POSIXized ISC" >&5
-if test -d /etc/conf/kconfig.d &&
- grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
-then
- echo "$ac_t""yes" 1>&6
- ISC=yes # If later tests want to check for ISC.
- cat >> confdefs.h <<\EOF
-#define _POSIX_SOURCE 1
+
+ echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
+echo "configure:1043: checking for strerror in -lcposix" >&5
+ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lcposix $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 1051 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char strerror();
+
+int main() {
+strerror()
+; return 0; }
EOF
+if { (eval echo configure:1062: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
- if test "$GCC" = yes; then
- CC="$CC -posix"
- else
- CC="$CC -Xp"
- fi
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -lcposix"
else
echo "$ac_t""no" 1>&6
- ISC=
fi
+
+
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1066: checking how to run the C preprocessor" >&5
+echo "configure:1086: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1081 "configure"
+#line 1101 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1087: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1107: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1098 "configure"
+#line 1118 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1124: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1115 "configure"
+#line 1135 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1121: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1141: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1146: checking for ANSI C header files" >&5
+echo "configure:1166: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1151 "configure"
+#line 1171 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1159: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1179: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1176 "configure"
+#line 1196 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1194 "configure"
+#line 1214 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 1215 "configure"
+#line 1235 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:1226: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1246: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1253: checking for $ac_hdr" >&5
+echo "configure:1273: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1258 "configure"
+#line 1278 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1263: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1283: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking whether to use slang""... $ac_c" 1>&6
-echo "configure:1451: checking whether to use slang" >&5
+echo "configure:1471: checking whether to use slang" >&5
CURSES_LIB_NAME=""
# Check whether --with-slang or --without-slang was given.
if test "${with_slang+set}" = set; then
ac_safe=`echo "slcurses.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for slcurses.h""... $ac_c" 1>&6
-echo "configure:1471: checking for slcurses.h" >&5
+echo "configure:1491: checking for slcurses.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1476 "configure"
+#line 1496 "configure"
#include "confdefs.h"
#include <slcurses.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1481: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1501: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for SLtt_initialize in -lslang""... $ac_c" 1>&6
-echo "configure:1498: checking for SLtt_initialize in -lslang" >&5
+echo "configure:1518: checking for SLtt_initialize in -lslang" >&5
_libs=$LIBS
LIBS="$LIBS -lslang"
if test "$cross_compiling" = yes; then
echo "configure: warning: *** Can not use slang when cross-compiling" 1>&2
else
cat > conftest.$ac_ext <<EOF
-#line 1505 "configure"
+#line 1525 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <slcurses.h>
int main () { SLtt_initialize (NULL); return 0; }
EOF
-if { (eval echo configure:1512: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
# We might need the term library
for termlib in ncurses curses termcap terminfo termlib; do
echo $ac_n "checking for tputs in -l${termlib}""... $ac_c" 1>&6
-echo "configure:1535: checking for tputs in -l${termlib}" >&5
+echo "configure:1555: checking for tputs in -l${termlib}" >&5
ac_lib_var=`echo ${termlib}'_'tputs | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l${termlib} $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1543 "configure"
+#line 1563 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tputs()
; return 0; }
EOF
-if { (eval echo configure:1554: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1574: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
done
echo $ac_n "checking for SLtt_initialize in -lslang $tcap""... $ac_c" 1>&6
-echo "configure:1578: checking for SLtt_initialize in -lslang $tcap" >&5
+echo "configure:1598: checking for SLtt_initialize in -lslang $tcap" >&5
LIBS="$LIBS $tcap"
if test "$cross_compiling" = yes; then
echo "configure: warning: *** Can not use slang when cross-compiling" 1>&2
else
cat > conftest.$ac_ext <<EOF
-#line 1584 "configure"
+#line 1604 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <slcurses.h>
int main () { SLtt_initialize (NULL); return 0; }
EOF
-if { (eval echo configure:1591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
echo "$ac_t""no" 1>&6
# We might need the math library
echo $ac_n "checking for SLtt_initialize in -lslang $tcap -lm""... $ac_c" 1>&6
-echo "configure:1613: checking for SLtt_initialize in -lslang $tcap -lm" >&5
+echo "configure:1633: checking for SLtt_initialize in -lslang $tcap -lm" >&5
LIBS="$LIBS -lm"
if test "$cross_compiling" = yes; then
echo "configure: warning: *** Can not use slang when cross-compiling" 1>&2
else
cat > conftest.$ac_ext <<EOF
-#line 1619 "configure"
+#line 1639 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <slcurses.h>
int main () { SLtt_initialize (NULL); return 0; }
EOF
-if { (eval echo configure:1626: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1646: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
for ac_func in snprintf vsnprintf
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1683: checking for $ac_func" >&5
+echo "configure:1703: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1688 "configure"
+#line 1708 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1711: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "glib-config", so it can be a program name with args.
set dummy glib-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1790: checking for $ac_word" >&5
+echo "configure:1810: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GLIB_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
min_glib_version=1.2.4
echo $ac_n "checking for GLIB - version >= $min_glib_version""... $ac_c" 1>&6
-echo "configure:1825: checking for GLIB - version >= $min_glib_version" >&5
+echo "configure:1845: checking for GLIB - version >= $min_glib_version" >&5
no_glib=""
if test "$GLIB_CONFIG" = "no" ; then
no_glib=yes
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 1848 "configure"
+#line 1868 "configure"
#include "confdefs.h"
#include <glib.h>
}
EOF
-if { (eval echo configure:1924: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1944: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
CFLAGS="$CFLAGS $GLIB_CFLAGS"
LIBS="$LIBS $GLIB_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1958 "configure"
+#line 1978 "configure"
#include "confdefs.h"
#include <glib.h>
return ((glib_major_version) || (glib_minor_version) || (glib_micro_version));
; return 0; }
EOF
-if { (eval echo configure:1968: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding GLIB or finding the wrong"
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:2015: checking return type of signal handlers" >&5
+echo "configure:2035: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2020 "configure"
+#line 2040 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:2037: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2057: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:2056: checking for vprintf" >&5
+echo "configure:2076: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2061 "configure"
+#line 2081 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vprintf(); below. */
; return 0; }
EOF
-if { (eval echo configure:2084: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:2108: checking for _doprnt" >&5
+echo "configure:2128: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2113 "configure"
+#line 2133 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
; return 0; }
EOF
-if { (eval echo configure:2136: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2156: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
for ac_func in getopt_long
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2163: checking for $ac_func" >&5
+echo "configure:2183: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2168 "configure"
+#line 2188 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2191: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2224: checking for $ac_hdr" >&5
+echo "configure:2244: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2229 "configure"
+#line 2249 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2234: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2254: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for tgetent in -lncurses""... $ac_c" 1>&6
-echo "configure:2261: checking for tgetent in -lncurses" >&5
+echo "configure:2281: checking for tgetent in -lncurses" >&5
ac_lib_var=`echo ncurses'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lncurses $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2269 "configure"
+#line 2289 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:2280: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2300: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test x$CURSES_LIB_NAME = x"
then
echo $ac_n "checking for tgetent in -lcurses""... $ac_c" 1>&6
-echo "configure:2305: checking for tgetent in -lcurses" >&5
+echo "configure:2325: checking for tgetent in -lcurses" >&5
ac_lib_var=`echo curses'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcurses $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2313 "configure"
+#line 2333 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:2324: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2344: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test x$CURSES_LIB_NAME = x"
then
echo $ac_n "checking for initscr in -lcurses""... $ac_c" 1>&6
-echo "configure:2350: checking for initscr in -lcurses" >&5
+echo "configure:2370: checking for initscr in -lcurses" >&5
ac_lib_var=`echo curses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcurses $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2358 "configure"
+#line 2378 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
initscr()
; return 0; }
EOF
-if { (eval echo configure:2369: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2389: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test x$CURSES_LIB_NAME = x"
then
echo $ac_n "checking for tgetent in -ltermcap""... $ac_c" 1>&6
-echo "configure:2394: checking for tgetent in -ltermcap" >&5
+echo "configure:2414: checking for tgetent in -ltermcap" >&5
ac_lib_var=`echo termcap'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2402 "configure"
+#line 2422 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:2413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2433: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for use_default_colors in -l$CURSES_LIB_NAME""... $ac_c" 1>&6
-echo "configure:2447: checking for use_default_colors in -l$CURSES_LIB_NAME" >&5
+echo "configure:2467: checking for use_default_colors in -l$CURSES_LIB_NAME" >&5
ac_lib_var=`echo $CURSES_LIB_NAME'_'use_default_colors | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$CURSES_LIB_NAME $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2455 "configure"
+#line 2475 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
use_default_colors()
; return 0; }
EOF
-if { (eval echo configure:2466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2486: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test x$slang_support != xyes; then
echo $ac_n "checking for wresize in -l$CURSES_LIB_NAME""... $ac_c" 1>&6
-echo "configure:2491: checking for wresize in -l$CURSES_LIB_NAME" >&5
+echo "configure:2511: checking for wresize in -l$CURSES_LIB_NAME" >&5
ac_lib_var=`echo $CURSES_LIB_NAME'_'wresize | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$CURSES_LIB_NAME $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2499 "configure"
+#line 2519 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
wresize()
; return 0; }
EOF
-if { (eval echo configure:2510: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2530: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for resizeterm in -l$CURSES_LIB_NAME""... $ac_c" 1>&6
-echo "configure:2534: checking for resizeterm in -l$CURSES_LIB_NAME" >&5
+echo "configure:2554: checking for resizeterm in -l$CURSES_LIB_NAME" >&5
ac_lib_var=`echo $CURSES_LIB_NAME'_'resizeterm | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$CURSES_LIB_NAME $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2542 "configure"
+#line 2562 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
resizeterm()
; return 0; }
EOF
-if { (eval echo configure:2553: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2573: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Taken from aumix (can't tell form the variable name?)
echo $ac_n "checking for private member _use_keypad in WINDOW""... $ac_c" 1>&6
-echo "configure:2579: checking for private member _use_keypad in WINDOW" >&5
+echo "configure:2599: checking for private member _use_keypad in WINDOW" >&5
if eval "test \"`echo '$''{'aumix_cv_struct_window_usekeypad'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2584 "configure"
+#line 2604 "configure"
#include "confdefs.h"
#ifdef HAVE_NCURSES_H
#include <ncurses.h>
WINDOW w; w._use_keypad;
; return 0; }
EOF
-if { (eval echo configure:2595: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2615: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
aumix_cv_struct_window_usekeypad=yes
else
LDFLAGS="$LDFLAGS $glib_libs"
fi
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:2665: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2641: checking for $ac_word" >&5
+echo "configure:2688: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2669: checking for working const" >&5
+echo "configure:2716: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2674 "configure"
+#line 2721 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2723: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2770: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2744: checking for inline" >&5
+echo "configure:2791: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2751 "configure"
+#line 2798 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2758: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2805: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2784: checking for off_t" >&5
+echo "configure:2831: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2789 "configure"
+#line 2836 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2817: checking for size_t" >&5
+echo "configure:2864: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2822 "configure"
+#line 2869 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2852: checking for working alloca.h" >&5
+echo "configure:2899: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2857 "configure"
+#line 2904 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2864: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2911: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2885: checking for alloca" >&5
+echo "configure:2932: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2890 "configure"
+#line 2937 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2950: checking whether alloca needs Cray hooks" >&5
+echo "configure:2997: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2955 "configure"
+#line 3002 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2980: checking for $ac_func" >&5
+echo "configure:3027: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2985 "configure"
+#line 3032 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3008: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3035: checking stack direction for C alloca" >&5
+echo "configure:3082: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 3043 "configure"
+#line 3090 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:3062: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3109: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3087: checking for $ac_hdr" >&5
+echo "configure:3134: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3092 "configure"
+#line 3139 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3097: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3144: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3126: checking for $ac_func" >&5
+echo "configure:3173: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3131 "configure"
+#line 3178 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3179: checking for working mmap" >&5
+echo "configure:3226: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 3187 "configure"
+#line 3234 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:3327: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3374: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
fi
-
- for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h sys/param.h
+
+ for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
+stdlib.h string.h unistd.h sys/param.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3355: checking for $ac_hdr" >&5
+echo "configure:3402: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3360 "configure"
+#line 3407 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3365: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3412: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
done
- for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \
-strdup __argz_count __argz_stringify __argz_next
+ for ac_func in feof_unlocked fgets_unlocked getcwd mempcpy munmap putenv \
+setenv setlocale stpcpy strchr strcasecmp strdup tsearch \
+__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3395: checking for $ac_func" >&5
+echo "configure:3443: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3400 "configure"
+#line 3448 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3423: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3471: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
- if test "${ac_cv_func_stpcpy+set}" != "set"; then
- for ac_func in stpcpy
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3452: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+
+ echo $ac_n "checking for iconv""... $ac_c" 1>&6
+echo "configure:3498: checking for iconv" >&5
+if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftest.$ac_ext <<EOF
-#line 3457 "configure"
+
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ cat > conftest.$ac_ext <<EOF
+#line 3506 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-
+#include <stdlib.h>
+#include <iconv.h>
+int main() {
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+; return 0; }
+EOF
+if { (eval echo configure:3516: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ am_cv_func_iconv=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS -liconv"
+ cat > conftest.$ac_ext <<EOF
+#line 3528 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+#include <iconv.h>
int main() {
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+; return 0; }
+EOF
+if { (eval echo configure:3538: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+ LIBS="$am_save_LIBS"
+ fi
+
+fi
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
+echo "$ac_t""$am_cv_func_iconv" 1>&6
+ if test "$am_cv_func_iconv" = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_ICONV 1
+EOF
+
+ echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
+echo "configure:3559: checking for iconv declaration" >&5
+ if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ cat > conftest.$ac_ext <<EOF
+#line 3565 "configure"
+#include "confdefs.h"
+
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
#else
-$ac_func();
+size_t iconv();
#endif
+int main() {
+
; return 0; }
EOF
-if { (eval echo configure:3480: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3584: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
+ am_cv_proto_iconv_arg1=""
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
+ am_cv_proto_iconv_arg1="const"
fi
rm -f conftest*
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"
fi
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
+ am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ echo "$ac_t""${ac_t:-
+ }$am_cv_proto_iconv" 1>&6
+ cat >> confdefs.h <<EOF
+#define ICONV_CONST $am_cv_proto_iconv_arg1
EOF
-
+
+ fi
+ LIBICONV=
+ if test "$am_cv_lib_iconv" = yes; then
+ LIBICONV="-liconv"
+ fi
+
+
+
+ echo $ac_n "checking for nl_langinfo and CODESET""... $ac_c" 1>&6
+echo "configure:3613: checking for nl_langinfo and CODESET" >&5
+if eval "test \"`echo '$''{'am_cv_langinfo_codeset'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- echo "$ac_t""no" 1>&6
+ cat > conftest.$ac_ext <<EOF
+#line 3618 "configure"
+#include "confdefs.h"
+#include <langinfo.h>
+int main() {
+char* cs = nl_langinfo(CODESET);
+; return 0; }
+EOF
+if { (eval echo configure:3625: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ am_cv_langinfo_codeset=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ am_cv_langinfo_codeset=no
+fi
+rm -f conftest*
+
fi
-done
- fi
- if test "${ac_cv_func_stpcpy}" = "yes"; then
- cat >> confdefs.h <<\EOF
-#define HAVE_STPCPY 1
+echo "$ac_t""$am_cv_langinfo_codeset" 1>&6
+ if test $am_cv_langinfo_codeset = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LANGINFO_CODESET 1
EOF
- fi
+ fi
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3514: checking for LC_MESSAGES" >&5
+echo "configure:3648: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3519 "configure"
+#line 3653 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:3526: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3547: checking whether NLS is requested" >&5
+echo "configure:3681: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
echo "$ac_t""$USE_NLS" 1>&6
+ BUILD_INCLUDED_LIBINTL=no
USE_INCLUDED_LIBINTL=no
if test "$USE_NLS" = "yes"; then
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3567: checking whether included gettext is requested" >&5
+echo "configure:3702: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- nls_cv_header_intl=
- nls_cv_header_libgt=
- CATOBJEXT=NONE
+ CATOBJEXT=NONE
+
+
+
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3586: checking for libintl.h" >&5
+echo "configure:3722: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3591 "configure"
+#line 3727 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3596: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3613: checking for gettext in libc" >&5
-if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
+ echo $ac_n "checking for GNU gettext in libc""... $ac_c" 1>&6
+echo "configure:3749: checking for GNU gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3618 "configure"
+#line 3754 "configure"
#include "confdefs.h"
#include <libintl.h>
+extern int _nl_msg_cat_cntr;
int main() {
-return (int) gettext ("")
+bindtextdomain ("", "");
+return (int) gettext ("") + _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:3625: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3763: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- gt_cv_func_gettext_libc=yes
+ gt_cv_func_gnugettext1_libc=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- gt_cv_func_gettext_libc=no
+ gt_cv_func_gnugettext1_libc=no
fi
rm -f conftest*
fi
-echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
-
- if test "$gt_cv_func_gettext_libc" != "yes"; then
- echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3641: checking for bindtextdomain in -lintl" >&5
-ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lintl $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3649 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char bindtextdomain();
-
-int main() {
-bindtextdomain()
-; return 0; }
-EOF
-if { (eval echo configure:3660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
+echo "$ac_t""$gt_cv_func_gnugettext1_libc" 1>&6
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3676: checking for gettext in libintl" >&5
-if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
+ if test "$gt_cv_func_gnugettext1_libc" != "yes"; then
+ echo $ac_n "checking for GNU gettext in libintl""... $ac_c" 1>&6
+echo "configure:3779: checking for GNU gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:3681: checking for gettext in -lintl" >&5
-ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lintl $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3689 "configure"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -lintl"
+ cat > conftest.$ac_ext <<EOF
+#line 3786 "configure"
#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char gettext();
-
+#include <libintl.h>
+extern int _nl_msg_cat_cntr;
int main() {
-gettext()
+bindtextdomain ("", "");
+return (int) gettext ("") + _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:3700: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3795: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ gt_cv_func_gnugettext1_libintl=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ gt_cv_func_gnugettext1_libintl=no
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- gt_cv_func_gettext_libintl=yes
-else
- echo "$ac_t""no" 1>&6
-gt_cv_func_gettext_libintl=no
-fi
-
-fi
-
-echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6
-else
- echo "$ac_t""no" 1>&6
+ LIBS="$gt_save_LIBS"
fi
+echo "$ac_t""$gt_cv_func_gnugettext1_libintl" 1>&6
fi
- if test "$gt_cv_func_gettext_libc" = "yes" \
- || test "$gt_cv_func_gettext_libintl" = "yes"; then
- cat >> confdefs.h <<\EOF
+ if test "$gt_cv_func_gnugettext1_libc" = "yes" \
+ || test "$gt_cv_func_gnugettext1_libintl" = "yes"; then
+ cat >> confdefs.h <<\EOF
#define HAVE_GETTEXT 1
EOF
- # Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3739: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$MSGFMT" in
- /*)
- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
- ac_cv_path_MSGFMT="$ac_dir/$ac_word"
- break
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
- ;;
-esac
-fi
-MSGFMT="$ac_cv_path_MSGFMT"
-if test -n "$MSGFMT"; then
- echo "$ac_t""$MSGFMT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
- if test "$MSGFMT" != "no"; then
- for ac_func in dcgettext
+ for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3773: checking for $ac_func" >&5
+echo "configure:3820: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3778 "configure"
+#line 3825 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3848: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
- # Extract the first word of "gmsgfmt", so it can be a program name with args.
-set dummy gmsgfmt; ac_word=$2
+ # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3828: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+echo "configure:3875: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- case "$GMSGFMT" in
+ case "$MSGFMT" in
/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
;;
*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
- break
+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+ ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+ break
+ fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
;;
esac
fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
-if test -n "$GMSGFMT"; then
- echo "$ac_t""$GMSGFMT" 1>&6
+MSGFMT="$ac_cv_path_MSGFMT"
+if test -n "$MSGFMT"; then
+ echo "$ac_t""$MSGFMT" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
- # Extract the first word of "xgettext", so it can be a program name with args.
-set dummy xgettext; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3864: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$XGETTEXT" in
- /*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
- break
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
- ;;
-esac
-fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
-if test -n "$XGETTEXT"; then
- echo "$ac_t""$XGETTEXT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
- cat > conftest.$ac_ext <<EOF
-#line 3896 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int _nl_msg_cat_cntr;
- return _nl_msg_cat_cntr
-; return 0; }
-EOF
-if { (eval echo configure:3904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- CATOBJEXT=.gmo
- DATADIRNAME=share
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CATOBJEXT=.mo
- DATADIRNAME=lib
-fi
-rm -f conftest*
- INSTOBJEXT=.mo
- fi
- fi
-
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
- if test "$CATOBJEXT" = "NONE"; then
- echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:3927: checking whether catgets can be used" >&5
- # Check whether --with-catgets or --without-catgets was given.
-if test "${with_catgets+set}" = set; then
- withval="$with_catgets"
- nls_cv_use_catgets=$withval
-else
- nls_cv_use_catgets=no
-fi
-
- echo "$ac_t""$nls_cv_use_catgets" 1>&6
-
- if test "$nls_cv_use_catgets" = "yes"; then
- echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:3940: checking for main in -li" >&5
-ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-li $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3948 "configure"
-#include "confdefs.h"
-
-int main() {
-main()
-; return 0; }
-EOF
-if { (eval echo configure:3955: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_lib=HAVE_LIB`echo i | sed -e 's/[^a-zA-Z0-9_]/_/g' \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_lib 1
-EOF
-
- LIBS="-li $LIBS"
-
-else
- echo "$ac_t""no" 1>&6
-fi
-
- echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:3983: checking for catgets" >&5
-if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3988 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char catgets(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char catgets();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_catgets) || defined (__stub___catgets)
-choke me
-#else
-catgets();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:4011: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_catgets=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_catgets=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'catgets`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_CATGETS 1
-EOF
-
- INTLOBJS="\$(CATOBJS)"
- # Extract the first word of "gencat", so it can be a program name with args.
-set dummy gencat; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4033: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$GENCAT" in
- /*)
- ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_GENCAT="$ac_dir/$ac_word"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GENCAT" && ac_cv_path_GENCAT="no"
- ;;
-esac
-fi
-GENCAT="$ac_cv_path_GENCAT"
-if test -n "$GENCAT"; then
- echo "$ac_t""$GENCAT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
- if test "$GENCAT" != "no"; then
- # Extract the first word of "gmsgfmt", so it can be a program name with args.
+ if test "$MSGFMT" != "no"; then
+ # Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4069: checking for $ac_word" >&5
+echo "configure:3909: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no"
- ;;
-esac
-fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
-if test -n "$GMSGFMT"; then
- echo "$ac_t""$GMSGFMT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test "$GMSGFMT" = "no"; then
- # Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4106: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$GMSGFMT" in
- /*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
- break
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no"
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
;;
esac
fi
echo "$ac_t""no" 1>&6
fi
- fi
- # Extract the first word of "xgettext", so it can be a program name with args.
+ fi
+ # Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4141: checking for $ac_word" >&5
+echo "configure:3946: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- USE_INCLUDED_LIBINTL=yes
- CATOBJEXT=.cat
- INSTOBJEXT=.cat
- DATADIRNAME=lib
- INTLDEPS='$(top_builddir)/intl/libintl.a'
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi
+ CATOBJEXT=.gmo
+ if test "$gt_cv_func_gnugettext1_libintl" = "yes"; then
+ INTLLIBS="-lintl"
+ fi
+ fi
+
else
echo "$ac_t""no" 1>&6
fi
- fi
- fi
if test "$CATOBJEXT" = "NONE"; then
nls_cv_use_gnu_gettext=yes
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4199: checking for $ac_word" >&5
+echo "configure:3998: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4233: checking for $ac_word" >&5
+echo "configure:4032: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4269: checking for $ac_word" >&5
+echo "configure:4068: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+ BUILD_INCLUDED_LIBINTL=yes
USE_INCLUDED_LIBINTL=yes
CATOBJEXT=.gmo
- INSTOBJEXT=.mo
- DATADIRNAME=share
- INTLDEPS='$(top_builddir)/intl/libintl.a'
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
+ INTLLIBS='$(top_builddir)/intl/libintl.a'
+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+ fi
+
+ if test -n "$LIBICONV" && test -n "$INTLLIBS"; then
+ INTLLIBS="$INTLLIBS $LIBICONV"
fi
if test "$XGETTEXT" != ":"; then
fi
fi
- # We need to process the po/ directory.
- POSUB=po
- else
- DATADIRNAME=share
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
+ POSUB=po
fi
-
- # If this is used in GNU gettext we have to set USE_NLS to `yes'
- # because some of the sources are only built for this goal.
- if test "$PACKAGE" = gettext; then
- USE_NLS=yes
- USE_INCLUDED_LIBINTL=yes
+ if test "$PACKAGE" = gettext; then
+ BUILD_INCLUDED_LIBINTL=yes
+ fi
+
+ for ac_prog in bison
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4134: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_INTLBISON'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$INTLBISON"; then
+ ac_cv_prog_INTLBISON="$INTLBISON" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_INTLBISON="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+INTLBISON="$ac_cv_prog_INTLBISON"
+if test -n "$INTLBISON"; then
+ echo "$ac_t""$INTLBISON" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$INTLBISON" && break
+done
+
+ if test -z "$INTLBISON"; then
+ ac_verc_fail=yes
+ else
+ echo $ac_n "checking version of bison""... $ac_c" 1>&6
+echo "configure:4167: checking version of bison" >&5
+ ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison .* \([0-9]*\.[0-9.]*\).*$/\1/p'`
+ case $ac_prog_version in
+ '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
+ 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
+ ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
+ *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
+ esac
+ echo "$ac_t""$ac_prog_version" 1>&6
+ fi
+ if test $ac_verc_fail = yes; then
+ INTLBISON=:
fi
for lang in $ALL_LINGUAS; do
-
+
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+
+ DATADIRNAME=share
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:4362: checking for catalogs to be installed" >&5
+echo "configure:4208: checking for catalogs to be installed" >&5
NEW_LINGUAS=
- for lang in ${LINGUAS=$ALL_LINGUAS}; do
- case "$ALL_LINGUAS" in
- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
- esac
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ for desiredlang in ${LINGUAS-$ALL_LINGUAS}; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ NEW_LINGUAS="$NEW_LINGUAS $presentlang"
+ fi
done
LINGUAS=$NEW_LINGUAS
echo "$ac_t""$LINGUAS" 1>&6
fi
fi
- if test $ac_cv_header_locale_h = yes; then
- INCLUDE_LOCALE_H="#include <locale.h>"
- else
- INCLUDE_LOCALE_H="\
-/* The system does not provide the header <locale.h>. Take care yourself. */"
- fi
-
-
- test -d intl || mkdir intl
- if test "$CATOBJEXT" = ".cat"; then
- ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:4390: checking for linux/version.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4395 "configure"
-#include "confdefs.h"
-#include <linux/version.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4400: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- msgformat=linux
-else
- echo "$ac_t""no" 1>&6
-msgformat=xopen
-fi
-
-
- sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
- fi
- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
- $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
-
- if test "$PACKAGE" = "gettext"; then
- GT_NO="#NO#"
- GT_YES=
- else
- GT_NO=
- GT_YES="#YES#"
- fi
-
-
-
MKINSTALLDIRS=
if test -n "$ac_aux_dir"; then
MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
fi
- l=
+ INTL_LIBTOOL_SUFFIX_PREFIX=
- test -d po || mkdir po
- if test "x$srcdir" != "x."; then
- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
- posrcprefix="$srcdir/"
- else
- posrcprefix="../$srcdir/"
- fi
- else
- posrcprefix="../"
+ if test -d $srcdir/po; then
+ test -d po || mkdir po
+ if test "x$srcdir" != "x."; then
+ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+ posrcprefix="$srcdir/"
+ else
+ posrcprefix="../$srcdir/"
+ fi
+ else
+ posrcprefix="../"
+ fi
+ rm -f po/POTFILES
+ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+ < $srcdir/po/POTFILES.in > po/POTFILES
fi
- rm -f po/POTFILES
- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
- < $srcdir/po/POTFILES.in > po/POTFILES
trap '' 1 2 15
s%@GLIB_CFLAGS@%$GLIB_CFLAGS%g
s%@GLIB_LIBS@%$GLIB_LIBS%g
s%@CURSES_LIB@%$CURSES_LIB%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
s%@RANLIB@%$RANLIB%g
s%@ALLOCA@%$ALLOCA%g
+s%@LIBICONV@%$LIBICONV%g
s%@USE_NLS@%$USE_NLS%g
s%@MSGFMT@%$MSGFMT%g
s%@GMSGFMT@%$GMSGFMT%g
s%@XGETTEXT@%$XGETTEXT%g
-s%@GENCAT@%$GENCAT%g
+s%@INTLBISON@%$INTLBISON%g
+s%@BUILD_INCLUDED_LIBINTL@%$BUILD_INCLUDED_LIBINTL%g
s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g
s%@CATALOGS@%$CATALOGS%g
s%@CATOBJEXT@%$CATOBJEXT%g
-s%@DATADIRNAME@%$DATADIRNAME%g
s%@GMOFILES@%$GMOFILES%g
-s%@INSTOBJEXT@%$INSTOBJEXT%g
-s%@INTLDEPS@%$INTLDEPS%g
s%@INTLLIBS@%$INTLLIBS%g
s%@INTLOBJS@%$INTLOBJS%g
s%@POFILES@%$POFILES%g
s%@POSUB@%$POSUB%g
-s%@INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g
-s%@GT_NO@%$GT_NO%g
-s%@GT_YES@%$GT_YES%g
+s%@DATADIRNAME@%$DATADIRNAME%g
s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
-s%@l@%$l%g
+s%@INTL_LIBTOOL_SUFFIX_PREFIX@%$INTL_LIBTOOL_SUFFIX_PREFIX%g
CEOF
EOF
fi
fi; done
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-ac_sources="$nls_cv_header_libgt"
-ac_dests="$nls_cv_header_intl"
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-srcdir=$ac_given_srcdir
-while test -n "$ac_sources"; do
- set $ac_dests; ac_dest=$1; shift; ac_dests=$*
- set $ac_sources; ac_source=$1; shift; ac_sources=$*
-
- echo "linking $srcdir/$ac_source to $ac_dest"
-
- if test ! -r $srcdir/$ac_source; then
- { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
- fi
- rm -f $ac_dest
-
- # Make relative symlinks.
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
- # The dest file is in a subdirectory.
- test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
- ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
- # A "../" for each directory in $ac_dest_dir_suffix.
- ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
- else
- ac_dest_dir_suffix= ac_dots=
- fi
-
- case "$srcdir" in
- [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
- *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
- esac
-
- # Make a symlink if possible; otherwise try a hard link.
- if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
- ln $srcdir/$ac_source $ac_dest; then :
- else
- { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
- fi
-done
EOF
cat >> $CONFIG_STATUS <<EOF
EOF
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
-case "$CONFIG_FILES" in *po/Makefile.in*)
+case " "$CONFIG_FILES" " in *" po/Makefile.in "* | *" po/Makefile.in:"*)
sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
+ ;;
esac
exit 0