Bug 25508 configure assumes bash > 2.0 is on system

Remove dolt.  With libtool2, there's not much need for dolt.

diff --git a/acinclude.m4 b/acinclude.m4
deleted file mode 100644 (file)
index 1195da3..0000000
--- a/acinclude.m4
+++ /dev/null
@@ -1,137 +0,0 @@
-dnl dolt, a replacement for libtool
-dnl Copyright © 2007-2008 Josh Triplett <josh@freedesktop.org>
-dnl Copying and distribution of this file, with or without modification,
-dnl are permitted in any medium without royalty provided the copyright
-dnl notice and this notice are preserved.
-dnl
-dnl To use dolt, invoke the DOLT macro immediately after the libtool macros.
-dnl Optionally, copy this file into acinclude.m4, to avoid the need to have it
-dnl installed when running autoconf on your project.
-
-AC_DEFUN([DOLT], [
-AC_REQUIRE([AC_CANONICAL_HOST])
-# dolt, a replacement for libtool
-# Josh Triplett <josh@freedesktop.org>
-AC_PATH_PROG(DOLT_BASH, bash)
-AC_MSG_CHECKING([if dolt supports this host])
-dolt_supported=yes
-if test x$DOLT_BASH = x; then
-    dolt_supported=no
-fi
-if test x$GCC != xyes; then
-    dolt_supported=no
-fi
-case $host in
-i?86-*-linux*|x86_64-*-linux*|powerpc-*-linux*) ;;
-amd64-*-freebsd*|i?86-*-freebsd*|ia64-*-freebsd*) ;;
-*) dolt_supported=no ;;
-esac
-if test x$dolt_supported = xno ; then
-    AC_MSG_RESULT([no, falling back to libtool])
-    LTCOMPILE='$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(COMPILE)'
-    LTCXXCOMPILE='$(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXXCOMPILE)'
-else
-    AC_MSG_RESULT([yes, replacing libtool])
-
-dnl Start writing out doltcompile.
-    cat <<__DOLTCOMPILE__EOF__ >doltcompile
-#!$DOLT_BASH
-__DOLTCOMPILE__EOF__
-    cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-args=("$[]@")
-for ((arg=0; arg<${#args@<:@@@:>@}; arg++)) ; do
-    if test x"${args@<:@$arg@:>@}" = x-o ; then
-        objarg=$((arg+1))
-        break
-    fi
-done
-if test x$objarg = x ; then
-    echo 'Error: no -o on compiler command line' 1>&2
-    exit 1
-fi
-lo="${args@<:@$objarg@:>@}"
-obj="${lo%.lo}"
-if test x"$lo" = x"$obj" ; then
-    echo "Error: libtool object file name \"$lo\" does not end in .lo" 1>&2
-    exit 1
-fi
-objbase="${obj##*/}"
-__DOLTCOMPILE__EOF__
-
-dnl Write out shared compilation code.
-    if test x$enable_shared = xyes; then
-        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-libobjdir="${obj%$objbase}.libs"
-if test ! -d "$libobjdir" ; then
-    mkdir_out="$(mkdir "$libobjdir" 2>&1)"
-    mkdir_ret=$?
-    if test "$mkdir_ret" -ne 0 && test ! -d "$libobjdir" ; then
-       echo "$mkdir_out" 1>&2
-        exit $mkdir_ret
-    fi
-fi
-pic_object="$libobjdir/$objbase.o"
-args@<:@$objarg@:>@="$pic_object"
-"${args@<:@@@:>@}" -fPIC -DPIC || exit $?
-__DOLTCOMPILE__EOF__
-    fi
-
-dnl Write out static compilation code.
-dnl Avoid duplicate compiler output if also building shared objects.
-    if test x$enable_static = xyes; then
-        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-non_pic_object="$obj.o"
-args@<:@$objarg@:>@="$non_pic_object"
-__DOLTCOMPILE__EOF__
-        if test x$enable_shared = xyes; then
-            cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-"${args@<:@@@:>@}" >/dev/null 2>&1 || exit $?
-__DOLTCOMPILE__EOF__
-        else
-            cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-"${args@<:@@@:>@}" || exit $?
-__DOLTCOMPILE__EOF__
-        fi
-    fi
-
-dnl Write out the code to write the .lo file.
-dnl The second line of the .lo file must match "^# Generated by .*libtool"
-    cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-{
-echo "# $lo - a libtool object file"
-echo "# Generated by doltcompile, not libtool"
-__DOLTCOMPILE__EOF__
-
-    if test x$enable_shared = xyes; then
-        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-echo "pic_object='$pic_object'"
-__DOLTCOMPILE__EOF__
-    else
-        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-echo pic_object=none
-__DOLTCOMPILE__EOF__
-    fi
-
-    if test x$enable_static = xyes; then
-        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-echo "non_pic_object='$non_pic_object'"
-__DOLTCOMPILE__EOF__
-    else
-        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-echo non_pic_object=none
-__DOLTCOMPILE__EOF__
-    fi
-
-    cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
-} > "$lo"
-__DOLTCOMPILE__EOF__
-
-dnl Done writing out doltcompile; substitute it for libtool compilation.
-    chmod +x doltcompile
-    LTCOMPILE='$(top_builddir)/doltcompile $(COMPILE)'
-    LTCXXCOMPILE='$(top_builddir)/doltcompile $(CXXCOMPILE)'
-fi
-AC_SUBST(LTCOMPILE)
-AC_SUBST(LTCXXCOMPILE)
-# end dolt
-])

diff --git a/configure.in b/configure.in
index 589b0c4f8b97e9229fadd2b62dfcc791c6ae3c0c..aba9d8250f0645db2467bc69e60a7994479738e4 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -63,7 +63,6 @@ AC_PROG_INSTALL
 AC_PROG_LN_S
 AC_LIBTOOL_WIN32_DLL
 AM_PROG_LIBTOOL
-DOLT
 AC_PROG_MAKE_SET
 
 dnl ==========================================================================