]> git.wh0rd.org Git - dump.git/blob - CHANGES
Lots of fixes from Philipe Troin:
[dump.git] / CHANGES
1 $Id: CHANGES,v 1.221 2003/03/26 10:58:19 stelian Exp $
2
3 Changes between versions 0.4b33 and 0.4b34 (released ?????????????????)
4 =======================================================================
5
6 1.      Fixed the INSTALL file to reflect the actual install paths.
7         Thanks to David Ronis <ronis@ronispc.chem.mcgill.ca> for
8         reporting the bug.
9
10 2.      Fixed the configure script to only check for headers presence
11         instead of trying to compile them. This should fix issues
12         with old build environments. Thanks to Kari Lempiainen 
13         <kari@funky.pp.fi> for reporting the bug.
14
15 3.      Fixed restore to correctly ignore sockets when comparing
16         a dump (as socket cannot be properly restored anyway). Thanks
17         to Gunther Reiszig <gunther@mit.edu> for reporting the bug.
18
19 4.      Fixed restore to correctly access the archive file (-A argument)
20         even when using a remote tape. Thanks to Fabrice Bellet 
21         <fabrice@bellet.info> for reporting the bug.
22
23 5.      Fixed (again) handling of long (largefile) seeks in rmt.
24         Thanks to Fabrice Bellet <fabrice@bellet.info> for reporting
25         the bug.
26
27 6.      Fixed restore corner case when dealing with large block sizes
28         dump is able to write now (-b 1024). Thanks to Fabrice Bellet
29         <fabrice@bellet.info> for reporting the bug.
30
31 7.      Fixed a bug preventing dump to access a filesystem having 
32         a label exactly 16 bytes in length. Thanks to <minduni@ti-edu.ch>
33         for reporting the bug.
34
35 8.      Made dump store dump dates using explicit timezones, fixing a
36         problem with incremental dumps if the timezone is modified 
37         between the dumps. Thanks to Philippe Troin <phil@fifi.org> for
38         the bug report and the patch.
39
40 9.      Fixed a bug encountered when dumping individual files (not full
41         filesystems or directories) and dangling symbolic links happen
42         to be in the list of files. For as far as dump is concerned,
43         dangling symbolic links are allowed, and are dumped as is.
44         Thanks to Jin-su Ahn <jsahn@ee.snu.ac.kr> for reporting the
45         bug and providing the fix.
46
47 10.     Fixed open and creation modes and permissions for QFA and
48         table-of-contents files in dump and restore. Thanks to 
49         Philippe Troin <phil@fifi.org> for the patch.
50
51 11.     Fixed the archive file descriptor handling enabling it to be 0.
52         This can happen in some cases when shell redirections are used.
53         Thanks to Philippe Troin <phil@fifi.org> for the patch.
54
55 12.     Delayed the opening of archive file until after suid had been
56         dropped (fixing a possible security issue if dump is suid). 
57         Thanks to Philippe Troin <phil@fifi.org> for the patch.
58
59 13.     Fixed the 'S' command handling in the rmt client part.
60         Thanks to Philippe Troin <phil@fifi.org> for the patch.
61         
62 14.     Modified the end-of-tape script handling to print out statistics
63         (and stop the timer) before launching the eot script. Also, the eot
64         script does not get run anymore when using -M (which makes sense) or
65         when multiple tapes are listed on the command line 
66         (-f tape0,tape1,tapen) (which also makes sense).
67         Thanks to Philippe Troin <phil@fifi.org> for the patch.
68
69 Changes between versions 0.4b32 and 0.4b33 (released February 10, 2003)
70 =======================================================================
71
72 1.      Added a note in the restore man page clarifying the question
73         'set the permissions on the current directory ?' asked by
74         restore at the end of treatment in -i and -x modes.
75
76 2.      Fixed the endianess issues when reading compressed tapes.
77         Thanks to Dark Force <daq4th@users.sourceforge.net> for
78         reporting this bug and providing test cases.
79
80 3.      Fixed the "ACL won't be dumped" warning message (which showed
81         an extra, unrelated error message). Thanks to Dragan Krnic
82         <dkrnic@lycos.com> for reporting this bug.
83
84 4.      Made dump look first into /etc/mtab, then into /etc/fstab 
85         when searching for filesystem paths. Also fixed some problems
86         caused by binding mounts or multiple block device mounts.
87         Thanks to Matus Uhlar <uhlar@fantomas.sk>, Elliott Mitchell
88         <ehem@m5p.com>, Greg Edwards <gedwards@users.sourceforge.net>,
89         Brian Hoy <brian.hoy@opus.co.nz>. (fixes Debian bugs #147086
90         and #160305, Sourceforge bugs #618699 and #679832).
91
92 5.      Made dump's -I option accept the value '0' meaning all the
93         read errors will be ignored. This can be useful when running
94         dump from unattended sessions (like cron jobs). Thanks to
95         John I Wang <jiwang@users.sourceforge.net> for the suggestion.
96
97 6.      Fixed the output of dump to indicate 'blocks' instead of
98         'tape blocks' in the various messages (blocks are always
99         1 Kilobyte, tape blocks are 1 BK * '-b' argument), and 
100         made it clearly print the current blocksize at the start of
101         a dump. Thanks to Michal Szymanski <msz@astrouw.edu.pl> for
102         the suggestions.
103
104 7.      Made rmt understand long (largefiles) seeks.
105
106 8.      Fixed build with very old versions of libext2fs, where
107         EXT2_FT_* constants were undefined.
108
109 9.      Made dump accept the dumpdates path on the command line
110         (-D file option) instead of using only the hardcoded one.
111         Thanks to Piete Brooks <pb22@users.sourceforge.net> for the
112         suggestion.
113
114 10.     Enabled rmt, LFS, readline, QFA options by default in
115         ./configure. Updated the configure process (new versions
116         of config.guess, config.sub etc).
117
118 Changes between versions 0.4b31 and 0.4b32 (released November 15, 2002)
119 =======================================================================
120
121 1.      Changed dump to use fcntl(F_SETLK) style locking instead
122         of flock() when locking the dumpdates file. With the old 
123         locking scheme, a local user having read rights on the 
124         dumpdates file could be able to do a Denial of Service attack
125         on dump. In order to lock the dumpdates file with the new
126         scheme, the user would need to have write access on the file.
127         Thanks to Richard Johnson <Richard.Johnson3@ey.com> for 
128         reporting the bug (originally a bugtraq post).
129
130 2.      Fixed interactive 'ls' which caused spurious errors warnings
131         about 'undefined filetypes' detected. Thanks to Jorgen Ostling 
132         <jorgen_ostling@users.sourceforge.net> for reporting this 
133         bug.
134
135 3.      Fixed dump's estimate when dealing with sparse inodes.
136
137 4.      Modified dump to allow setting a blocksize bigger than 32kB
138         (raised the limit to 1024kB), because newer hardware needs
139         this for proper operation. Thanks to Dirk Traenapp
140         <dtraenapp@users.sourceforge.net> for reporting this.
141
142 5.      Fixed a bug causing Dump to stop and report an error if an
143         inode number in the exclude file was followed by some amount
144         of whitespace. Thanks to Jeffrey Sofferin 
145         <sofferin@users.sourceforge.net> for reporting this bug.
146
147 6.      Fixed a bug which caused restore, in some particular cases,
148         to ask some 'scary' questions and leave a bunch of RSTTMP
149         directories behind when restoring incremental tapes. Thanks
150         to Philippe Troin <phil@fifi.org> for reporting this bug and
151         providing the test cases.
152
153 7.      Changed the wording when inodes are excluded from dump:
154         replaced 'Added inode 7 to exclude list' with
155         'Excluding inode 7 (resize inode) from dump', as suggested
156         by Elliott Mitchell <ehem@m5p.com> in a Debian bug report.
157
158 Changes between versions 0.4b30 and 0.4b31 (released July 30, 2002)
159 ===================================================================
160
161 1.      Fixed rmt open flags transmission (GNU's symbolic syntax over
162         rmt) which I broke in 0.4b29. Thanks to Eros Albertazzi
163         <eros@lamel.bo.cnr.it> for reporting the bug.
164
165 Changes between versions 0.4b29 and 0.4b30 (released July 25, 2002)
166 ===================================================================
167
168 1.      Made dump print out the ext2 logical block number in case of a read
169         error, which can be given as an argument to debugfs' ncheck command,
170         in order to find out the affected inode. Added note about this 
171         usage in dump's man page.
172
173 2.      Fixed a problem in restore when reading tapes written on big
174         endian machines with very old versions of dump. The patch was
175         contributed by George Helffrich <george@geology.bristol.ac.uk>.
176
177 3.      Fixed the tape length calculation when using large tapes
178         and compression. Thanks to Georg Lippold 
179         <g_lippold@sourceforge.net> for reporting the bug.
180
181 4.      Added a new set of examples in dump_on_cd_2 directory, based
182         on dump_on_cd examples but somewhat enhanced, supporting DVD
183         media, and localized in english and german. Thanks to
184         Georg Lippold <g_lippold@sourceforge.net> for the new scripts.
185
186 5.      Made dump save 32 bit UID/GID. Internally, this was achieved
187         by switching from the old BSD inode format to the new BSD 
188         inode format, which means that the tape format was changed.
189         However, since all restore versions out there should 
190         transparently support both inode formats, the change should
191         have no side effects. Thanks to John Yu <jky@cs.bu.edu> for
192         reporting the bug.
193
194 6.      Fixed a lot of warnings in the code shown when compiling
195         with 'gcc -W'. Thanks to Matthias Andree 
196         <matthias.andree@stud.uni-dortmund.de> for reporting this.
197
198 7.      Fixed a small markup bug in the dump man page. Thanks to
199         Eric S. Raymond <esr@minx.thyrsus.com> for submitting the
200         patch.
201
202 8.      Rewrote entirely the man pages using the tmac.an macro
203         package (Linux man page format) instead of the original BSD
204         format. They should be now cleaner and easier to modify.
205
206 Changes between versions 0.4b28 and 0.4b29 (released June 8, 2002)
207 ==================================================================
208
209 1.      Fixed a problem in the rmt ioctl command, where ioctl's issued from
210         non Linux clients were misinterpreted. The description of the problem
211         (incompatible numbering in Linux mtio opcodes) is documented at
212         ftp://ftp.fokus.gmd.de/pub/unix/star/README.mtio . Thanks to
213         Jörg Schilling <schilling@fokus.gmd.de> for reporting this bug and
214         providing an excellent, cross-platform replacement for rmt in his
215         star package.
216
217 2.      Fixed a bug reported by Andy Mentges <amentges@jumpline.com>
218         which caused restore to fail when the inode maps were not entirely
219         contained on the first volume (when using really small volumes or
220         when dumping a huge number of inodes).
221
222 3.      Fixed a problem in dump, where files in subdirectories of directories 
223         that have the nodump flag set (or being excluded with -e/-E) were 
224         sometimes incorrectly dumped (instead of being excluded). The original
225         fix is from David C Lawrence <tale@dd.org> in the FreeBSD version 
226         of dump: http://www.FreeBSD.org/cgi/query-pr.cgi?pr=32414
227         Thanks to Ted Grzesik <tedgyz@roostme.com> for reporting the bug and 
228         help testing the patch.
229
230 4.      Added some example scripts from Gerd Bavendiek <bav@epost.de>
231         which makes one able to pipe the output of dump, by the net, to
232         a remote CD-burner server.
233
234 5.      Made dump use O_CREAT|O_TRUNC both locally and remotely (over rmt), 
235         and use GNU's symbolic syntax over rmt instead of numerical values
236         to assure multiple platform compatibility.
237
238 6.      Documented the -d option in restore.
239
240 7.      Added a -v (verbose) mode to dump. For now it just prints the number
241         of the inode being dumped, but this could evolve in future versions
242         to include interesting debugging output.
243
244 8.      Added a -o flag to restore, which automatically restores the current
245         directory permissions in -i or -x mode, without asking the operator
246         whether to do so. Patch submitted by Tony Clayton <tonyc@e-smith.com>
247         and Peter Samuel <peters@e-smith.com>.
248
249 Changes between versions 0.4b27 and 0.4b28 (released April 12, 2002)
250 ====================================================================
251
252 1.      Fixed a bug in the QFA feature which could have caused 
253         a bad tape positionning on restore (causing extra delays in
254         restore). Credits go to Uwe Gohlke <uwe@ugsoft.de>.
255
256 2.      Added a small note in the dump man page specifying that
257         there should be no white space between the option letter and
258         the -j or -z parameter, thanks to Kenneth Porter <shiva@well.com>
259
260 3.      Made restore work with older versions of the readline library,
261         by checking in configure for several extended symbols. Restore
262         can now be compiled with a readline as old as the 2.0 release
263         (though it may be a good idea to upgrade it to a more recent
264         version...). Thanks to Andrew Donkin <ard@waikato.ac.nz> for
265         reporting the build failures.
266
267 4.      Fixed a performance problem with the QFA file creation in
268         dump, which made unnecessary seeks on the tape slowing down
269         the dump. Thanks to Andrew Donkin <ard@waikato.ac.nz> for
270         reporting this issue.
271
272 5.      Removed the inclusion of some kernel headers in the dump
273         source, which prevented the compile in some kernel/glibc
274         headers/architecture combination. Thanks to Bdale Garbee
275         <bdale@gag.com> for reporting the bug.
276
277 6.      Added the appropriate error message when dump fails to
278         open the output file for writing. Thanks to Amith Varghese
279         <amithv@yahoo.com> for reporting this bug.
280
281 7.      Made restore able to understand large Solaris ufsdump tapes 
282         (containing inodes bigger than 4194304). Sun have introduced
283         an "extension" to the dump tape format when dealing with
284         those inodes, which was uncorrectly handled by Linux restore.
285         Thanks to Uwe Gohlke <uwe@ugsoft.de> for reporting the bug and
286         providing a test case.
287
288 8.      Added the -m parameter to dump which optimises the output for
289         inodes having been changed but not modified since the last dump
290         ('changed' and 'modified' have the meaning defined in stat(2)).
291         For those inodes, dump will save only the metadata, instead of
292         saving the entire inode contents. Inodes which are either 
293         directories or have been modified since the last dump are saved
294         in a regular way.  Uses of this flag must be consistent, meaning
295         that either every dump in an incremental dump set have the flag,
296         or no one has it.
297
298 Changes between versions 0.4b26 and 0.4b27 (released February 15, 2002)
299 =======================================================================
300
301 1.      Fixed behaviour of dump when exceeding resource limits
302         (SIGXFSZ treatment).
303
304 2.      Added the -L flag to restore to allow the user to specify a 
305         maximal allowed number of miscompares when using restore
306         with the -C option to check the backup.
307
308 3.      Detailed the manual entry for the -N option of restore.
309
310 4.      Added the -a flag to restore to make able doing unattended
311         restores in -i or -x mode (automatically walks through the
312         multiple dump volumes).
313
314 5.      Extended the QFA mode to work with local files and/or
315         remote tapes and files. This way, restore can know in advance
316         the tape number and the offset for the inodes to extract and 
317         can minimize the extraction time by seeking directly to the 
318         good tape/offset.
319
320 6.      Added the -A <archive> option to both dump and restore, 
321         which makes dump to archive a dump table-of-contents in
322         the specified file to be used by restore to determine
323         whether a file is in the dump file that is being restored.
324         (the archive file syntax is also compatible with the
325         Solaris ufsdump generated one).
326
327 7.      Small fix in restore making it able to read some (broken ?)
328         Solaris ufsdump tapes.
329
330 8.      Fixed dump to correctly recognise the root filesystem when using
331         ext2 disk labels (LABEL=/). Thanks to John Yu <jky@it.bu.edu>
332         for reporting this bug.
333
334 9.      Added the -P <file> option to restore to create a
335         Quick File Access file from an already made dump. Patch 
336         contributed by Uwe Gohlke <uwe@ugsoft.de>.
337
338 10.     Made restore compile and run on Solaris, making it a 
339         possible replacement for the standard ufsrestore. Port was
340         contributed by Uwe Gohlke <uwe@ugsoft.de>.
341
342 Changes between versions 0.4b25 and 0.4b26 (released January 7, 2002)
343 =====================================================================
344
345 1.      Added a set of backup scripts from Eugenio Diaz
346         <getnito@yahoo.com> in the examples section. It features
347         automatic (cron based) full and incremental dumping of
348         several filesystems on a separate filesystem.
349
350 2.      Fixed a off-by-one miscalculation which disabled dumping
351         a one letter subdirectory. Thanks to Chris Siebenmann 
352         <cks@utcc.utoronto.ca> for reporting the bug.
353
354 3.      Fixed several restore bugs occuring when trying to
355         restore some missing files on the tape. Thanks to Chris
356         Siebenmann <cks@utcc.utoronto.ca> for reporting the bug.
357
358 4.      Fixed --with-ldopts configure argument passing, installing from
359         a separate object directory, makefile cleanups contributed
360         by <splite@purdue.edu>.
361
362 5.      Fix a bug which could caused, in some conditions, the highest
363         number inode of a filesystem, to not be dumped. Many thanks
364         to Chris Siebenmann <cks@utcc.utoronto.ca> for helping me
365         chase this bug.
366         
367 Changes between versions 0.4b24 and 0.4b25 (released November 17, 2001)
368 =======================================================================
369
370 1.      Added a mini howto from Patrick Walsh in the examples 
371         directory.
372
373 2.      Minor man pages syntax corrections. Thanks to
374         Chris Danis <screechco@home.com> for reporting the bugs.
375
376 3.      Added a script from David B. Peterson <dave@toppledwagon.com>
377         to the examples section. It features dumping several
378         filesystems to a remote tape drive upon ssh.
379
380 4.      Added a patch provided by Richard Jones <rich@annexia.org>
381         which allows BRADEMAX (number of read errors tolerated by
382         dump) to be adjusted using the -I option.
383
384 5.      Fixed a bug which disabled doing "restore -C -f -". Thanks
385         to Clemens Stiglechner <a9401816@unet.univie.ac.at> for the
386         patch.
387
388 6.      Add the -l option to restore to specify if, when doing a
389         remote restore, the file used to access the backup is a
390         regular file (the defaults being a tape drive). Restore needs
391         to know this information when reading a remote compressed 
392         dump. Previously, this information was autodetected, but
393         the autodetection code fails (with ioctl: Inappropriate ioctl 
394         for device) when using a non Linux remote box. Thanks to 
395         many users and especially to Eros Albertazzi 
396         <eros@lamel.bo.cnr.it> for reporting this.
397
398 7.      Found a workaroung for the dump deadlock problem (3 childs 
399         stuck in pause(), father in read()). The workaround seems
400         to work for me and several beta-testers. If it doesn't work
401         for you, please report back.
402
403 8.      Updated the RPM spec file (BuildPrereq, URL etc).
404
405 Changes between versions 0.4b23 and 0.4b24 (released September 12, 2001)
406 ========================================================================
407
408 1.      Fixed the permissions of a newly created QFA file by dump.
409
410 2.      Cleaned up the source of dump (the external variables 
411         definition was a complete mess, making possible to have
412         objects overlap).
413
414 3.      Fixed restore to use the full tape volume path when doing
415         a compare (since it changes the working directory to the
416         filesystem being compared in the process).
417
418 4.      Added the -q option to dump which makes dump abort 
419         whenever it needs operator attention. It should be
420         easier to use dump in scripts with this option.
421
422 5.      Detect the use of incompatible options to dump and
423         refuse them (like -a and -B options together).
424
425 6.      Added bzip2 compression to dump/restore (use option -j level 
426         to select it). Note that you will need a restore version
427         >= 0.4b24 in order to restore a bzip2 compressed dump.
428         The same warning as for the zlib compression applies:
429         the tape format of a bzip2 dump is not compatible with the
430         original BSD tape format.
431
432 7.      Fixed a overflow problem in dump corrupting the dump when
433         very large files were encountered. Thanks to Vladimir Nadvornik 
434         for the bug report.
435
436 8.      Added a ioctl(BLKFLSBUF) in dump which should flush the
437         kernel buffer/page cache before starting the dump, helping
438         a bit those who use dump on mounted filesystems. Thanks to
439         John Yu <jky@it.bu.edu> and to Theodore T'so <tytso@mit.edu>
440         for this suggestion.
441
442 9.      Updated the RPM spec file following the RedHat changes 
443         (dynamically linked binaries now in /usr/sbin etc).
444
445 10.     Added a patch from Helmut Jarausch <jarausch@igpm.rwth-aachen.de>
446         which enables restore to recognise multi volume compressed dumps
447         done on CD. Included his scripts for dump (which pipe the dump
448         output directly into cdrecord) and restore. There is now 
449         possible to to backups to CD on the fly!
450
451 Changes between versions 0.4b22 and 0.4b23 (released July 20, 2001)
452 ===================================================================
453
454 1.      Fixed a buffer overflow in restore/tape.c. Patch provided by
455         Marcus Meissner (Caldera International Security Dept.).
456
457 2.      Implement the Sun rmt extended protocol. Patch submitted
458         by Ian Gordon <iangordon@users.sourceforge.net>.
459
460 3.      Check for the e2fsprogs header <ext2fs/ext2_fs.h> instead of 
461         the linux kernel header. This ensures that dump always has the
462         latest version of this file. Patch submitted by
463         Andreas Dilger <adilger@turbolinux.com>.
464
465 4.      Report any filesystem present in either /etc/fstab with a 
466         positive passno or /etc/dumpdates in dump -w output.
467         Patch submitted by Andreas Dilger <adilger@turbolinux.com>.
468
469 5.      Fixed the looping problem in dump introduced in the 
470         previous version.
471
472 6.      Changed the -B option of dump to limit the size of 
473         _compressed_ output per volume if compression is on.
474         Patch contributed by Helmut Jarausch 
475         <jarausch@igpm.rwth-aachen.de>. Note however that, since
476         it is impossible to predict the size of the compressed
477         data before doing the compression, the -B limit is a bit
478         conservative.
479
480 7.      Fixed a bug in reading the operator typed file/tape path for
481         the next volume in restore.
482
483 8.      Implemented a "-F script" option to restore which permits the
484         user to specify a script which will be launched at the
485         beginning of each tape, useful for automatic programming of
486         tape changers for example. See the restore man page for the
487         script parameters and return codes.
488
489 9.      Small fix for the QFA routines provided by Uwe Gohlke 
490         <uwe@ugsoft.de>, and some recommendations for QFA uses in
491         the man pages.
492
493 10.     Fixed the multivolume restoring where making a mistake
494         to the 'Mount next tape' prompt caused several blocks to
495         be lost.
496
497 11.     Enhanced the -e option of dump to take as a parameter a
498         comma separated list of inode numbers.
499
500 12.     Added the -E option to dump which specify a file containing
501         inode numbers to exclude from the dump.
502
503 13.     Fixed the compressed multi-volume dump + restore.
504
505 Changes between versions 0.4b21 and 0.4b22 (released May 12, 2001)
506 ==================================================================
507
508 1.      Made dump report the number of blocks dumped per volume.
509         Thanks to Kenneth Porter <shiva@well.com> for the suggestion.
510
511 2.      Fix a bug in dump where waiting too much at the 'change volumes'
512         question caused the volume to be rewritten. Thanks to
513         Graham Reed <greed@users.sourceforge.net> for reporting the
514         bug and providing a patch.
515
516 3.      Added a compression option to dump, contributed by Jerry
517         Peters <gapeters@worldnet.att.net>.
518
519         WARNING: the compression works only on files/pipes and 
520         drives supporting variable block size.
521
522         WARNING2: tapes created using the compression feature are
523         incompatible with the standard dump tape format, and a
524         version of restore >= 0.4b22 will be needed for extraction.
525
526 4.      Fixed some compilation problems for glibc 2.2.2 and 64 bit 
527         architectures. Thanks to Paul Slootman <paul@debian.org> for
528         the patch and to Bdale Garbee <bdale@gag.com> for forwarding
529         it upstream.
530
531 5.      Many cleanups (CPP defines, const char warnings, check of
532         ext2fs COMPAT flags, time_t cleanups, added libext2 version
533         in dump usage text) by Andreas Dilger <adilger@turbolinux.com>.
534
535 6.      Made --prefix option work in configure. All the install path
536         are now based on the configure parameters.
537
538 7.      Added the Quick File Access mode in dump/restore, contributed
539         by Uwe Gohlke <uwe@ugsoft.de>. In this mode, dump stores in
540         a file tape position for each inode, and this file is used by 
541         restore (if called with parameter Q and the filename)
542         to directly position the tape at the file restore is currently 
543         working on.  This saves hours when restoring single files from
544         large backups, saves the tapes and the drive's head. Use
545         --enable-qfa option of configure to compile in the QFA support.
546
547 8.      Added the possibility to dump several files and directories
548         in a single invocation of dump. Thanks to Uwe Gohlke 
549         <uwe@ugsoft.de> for implementing this option.
550
551 9.      Fixed the dumping and restoring of files with holes
552         (files ending with holes didn't get dumped or restored 
553         correctly).
554
555 10.     Fixed a socket descriptor leak in dump, which leaved opened
556         3 file descriptors per dump process (and there is one dump
557         process per tape).
558
559 11.     Fixed dump large file system support, by explicit use of
560         open64/lseek64/etc functions (explicit use needed because 
561         e2fsprogs libraries don't behave well when compiled with 
562         FILE_OFFSET_BITS=64).
563
564 Changes between versions 0.4b20 and 0.4b21 (released January 13, 2001)
565 ======================================================================
566
567 1.      Fixed some bugs in the dump -w|-W logic introduced by
568         the previous version. Thanks to Andreas Dilger 
569         <adilger@turbolinux.com> for his help on this one.
570
571 2.      Fixed again a compilation problem when using old e2fs
572         headers (filesystem label related). Thanks to many users
573         who reported this stupid error.
574
575 3.      Fixed a build problem on old lib5 based systems dealing with 
576         _PATH_MNTTAB being undefined. Thanks to John Adams
577         <johna@onevista.com> for reporting the bug.
578
579 4.      Improved the error detection in restore when creating
580         the temporary files in TMPDIR. Now restore will corectly
581         report a 'no space left on device' error instead of 
582         strange errors which could imply an archive corruption.
583         Thanks to Gabriel Somlo <somlo@cs.colostate.edu> and
584         bgjenero <bgjenero@sympatico.ca> for reporting the bug.
585
586 5.      Added the throughput information in dump's progression
587         messages.  Thanks to Andreas Dilger <adilger@turbolinux.com> 
588         for the patch.
589
590 6.      Use libext2fs's inode scanning routines, which are particularly
591         robust when dealing with errors (especially when having some
592         bad blocks on the filesystem). Many thanks to Colin
593         <colin@horizon.com> for reporting the bug, investigating
594         the issues, finding a workaround, writing the patch and
595         fully testing it... (of course, if this patch will break
596         anything, he is to blame for :-)).
597
598 7.      Made dump and restore LFS aware. Dump can dump a filesystem
599         containing large files, generate a large file on output and
600         restore can restore them. This feature is not enabled by
601         default, use --enable-largefile option of configure to enable
602         it (you need to have a LFS aware glibc though). Thanks to
603         Andrea Arcangeli <andrea@suse.de> for submitting the patch,
604         and to Theodore T'so <tytso@valinux.com> for his always
605         useful thoughts.
606
607 8.      Made dump ask upon a tape write error if it should rewrite
608         the current volume (assume this is a bad tape) or if it should
609         assume an end-of-tape condition (useful for tape drives which
610         behaves badly at the end of the tape). Thanks to Andreas
611         Dilger <adilger@turbolinux.com> for the suggestion.
612
613 Changes between versions 0.4b19 and 0.4b20 (released November 10, 2000)
614 =======================================================================
615
616 1.      Fixed a small compilation problem due to a change
617         in the definintion of the struct sigaction in
618         glibc 2.0 / libc5. Thanks to Gunther Schlegel 
619         <schlegel@riege.de> for reporting the bug and to
620         Dave Platt <dplatt@snulbug.mtview.ca.us> for suggesting
621         a fix.
622
623 2.      Modified the label and uuid analysis in order to be 
624         self-contained (independant of kernel/libc headers). This 
625         should fix the compile with older kernel/libc headers and
626         will preserve the functionality. Thanks to Bernhard Erdmann
627         <bernhard.erdmann@gmx.de> for reporting the bug.
628
629 3.      The 'exclude inode' option, if applied to a directory
630         inode, excludes now correctly all the leaves of this 
631         directory. Thanks to John R. Dennison 
632         <gerdesas@users.sourceforge.net> for reporting the bug.
633
634 4.      Fixed the '-e' option to disable the possibility
635         to exclude the root inode (which causes the dumps to
636         be unreadable by restore). Prevented array overflow
637         when multiple -e options are used.
638
639 5.      Fixed dump to correctly interpret a filesystem argument
640         which is a mountpoint and it is not an absolute path 
641         (as specified in the fstab). Thanks to Bernhard R. Erdmann 
642         <be@berdmann.de> for reporting the bug.
643
644 6.      Made dump able to backup files larger than 2 GB. Note that
645         dump still doesn't cope with files larger than 4 GB.
646
647 7.      Restore the real uid and gid before invoking an external
648         RSH program (big hole when dump or restore is suid root!).
649
650 8.      Get the values for the default tape device and the location
651         of fstab file from the system headers. Thanks to
652         Andreas Dilger <adilger@turbolinux.com> for the patch.
653
654 9.      Made dump -w|-W report all recognized filesystems 
655         present in either /etc/fstab or /etc/dumpdates, and present
656         the list in the same order as in fstab file. Thanks
657         to Andreas Dilger <adilger@turbolinux.com> for the patch.
658
659 10.     Made dump's -a (automatic end of tape detection) the
660         default. Specifying one of -B, -c, -d or -s options will
661         override the EOM detection. Thanks to Andreas Dilger
662         <adilger@turbolinux.com> for the patch.
663
664 11.     Save the ext2 filesystem label into the dump volume label.
665         Specifying a volume label on the command line (-L option)
666         will override this feature. Thanks to Andreas Dilger
667         <adilger@turbolinux.com> for the patch.
668
669 Changes between versions 0.4b18 and 0.4b19 (released August 20, 2000)
670 =====================================================================
671
672 1.      Fixed the signal handling in dump (which I broke in 0.4b17)
673         which was causing several strange dump failures (dump
674         hanged or segmentation faults etc). 
675
676 2.      Specified the default blocksize in the dump man page.
677
678 3.      Changed two info messages of restore to be written on stdout
679         instead of stderr in order to leave stderr only for errors
680         or warnings. Thanks to Stephen Atwell 
681         <satwell@urbana.css.mot.com> for the suggestion.
682
683 4.      Corrected an off by one calculation which prevented
684         dumping a directory having a 1 character name length.
685         Thanks to Bernhard Erdmann <bernhard.erdmann@gmx.de>
686         for reporting the bug.
687
688 5.      Reinforce dump in order to allow only level 0 and no
689         -u option when dumping a subdirectory, and document 
690         this in the man page. Thanks to Bernhard Erdmann 
691         <bernhard.erdmann@gmx.de> for reporting the bug.
692
693 6.      Fixed a small harmless bug in restore which caused
694         in some conditions hard links to be restored several
695         times (therefore generation some warning messages).
696         Thanks to Kenneth Porter <shiva@well.com> for
697         reporting the bug.
698
699 7.      Updated the RPM spec file to the latest RedHat version,
700         providing FHS packaging and other cosmetic changes.
701         You will need RPM version >= 3.0.5 in order to build the RPM.
702
703 8.      Updated the configure script to check for libtermcap
704         before checking for libreadline, because we need this
705         library in order to compile the readline support.
706
707 9.      Made dump understand the LABEL= and UUID= notation
708         both in /etc/fstab and on the command line. Note that
709         you will need the /proc filesystem in order to use
710         these notations. Thanks to Erik Troan <ewt@redhat.com> 
711         for providing the patch.
712
713 Changes between versions 0.4b17 and 0.4b18 (released June 30, 2000)
714 ===================================================================
715
716 1.      Fixed a potential buffer overflow in restore. Thanks
717         to Stan Bubrouski <satan@fastdial.net> for reporting 
718         the bug.
719
720 2.      Fixed a readline-related bug which prevented
721         'cat DUMPFILE | restore -i -f -' from working. Thanks
722         to Charles Karney <karney@users.sourceforge.net>
723         for the bug report.
724
725 3.      Changed a few "panic" into "exit", causing restore to
726         be more stable against some attacks (like the last one
727         reported on Bugtraq, although the last version of restore
728         was not vulnerable - just dumped core). Thanks to
729         Andreas Hasenack <andreas@conectiva.com.br> for reporting
730         the bugs to me.
731
732 4.      Removed the suid-root bit on dump and restore in the
733         default build (and generated RPMs). It should be safer
734         now. Users who need the suid-root capabilities in order
735         to make network backups should read first the man page
736         of dump and enable the suid bit manually.
737
738 5.      Added -ltermcap to the compile parameters for restore
739         when using readline support, in order to make the compile
740         process work on some systems (SuSE ?). Thanks to 
741         Patrik Schindler <poc@pocnet.net> for reporting the bug.
742
743 Changes between versions 0.4b16 and 0.4b17 (released June 1st, 2000)
744 ====================================================================
745
746 1.      The -F script is called now *only* at the end of a tape,
747         not at the end of the dump. Thanks to Christian Haul
748         <haul@informatik.tu-darmstadt.de> for the bug report.
749
750         Normally, the device name and the current volume number
751         are passed on the command line of the script. However,
752         if you want the old style script (with no arguments
753         passed on the command line), you can enable it in
754         configure with the --enable-oldstylefscript.
755
756 2.      Use posix signal handling to preserve dump functionality 
757         with libc5. Thanks to Jeff Johnson <jbj@redhat.com> for
758         the patch.
759
760 3.      Made the exit code of restore in case of a 'C'ompare
761         command reflect the result of the compare. An exit status
762         of 0 means the dump archive is correct, 1 means tape errors,
763         2 means that some files were modified. Thanks to Kenneth Porter
764         <shiva@well.com> for the suggestion.
765
766 4.      Made (finally) quotes work in interactive restore.
767
768 5.      Small fixes in order to allow dump to compile with a 
769         really old e2fsprogs version. Thanks to Ian Zimmerman 
770         <itz@speakeasy.org> for the bug report.
771
772 6.      Add GNU readline capabilities to interactive restore.
773         Use configure's --enable-readline flag to enable this feature.
774         Thanks to Patrik Schindler <poc@pocnet.net> for the
775         suggestion.
776
777 7.      Do the compare on the fly in restore 'C' mode (this will
778         allow not to exhaust the available /tmp space when 
779         ccmparing large files). Thanks to Kenneth Porter
780         <shiva@well.com> for the suggestion.
781
782 Changes between versions 0.4b15 and 0.4b16 (released March 11, 2000)
783 ====================================================================
784
785 1.      Fixed some several duplicate 'DUMP: DUMP:' in the
786         output of dump.
787
788 2.      Corrected the estimation of blocks to dump. Note that
789         this is still wrong for large directory inodes, due
790         to the size of a BSD directory entry on the tape
791         (estimation is based on the size of the ext2 directory,
792         which is smaller because it doesn't contain the null
793         character at the end).
794
795 3.      Made dump report the total number of MB written to
796         tape at the end of run. Thanks to W. Reilly Cooley
797         <wcooley@nakedape.cc> for the patch.
798
799 4.      Added the -X option to restore giving the possibility
800         to read the names of the files to be extracted/listed 
801         from a text file (in addition of the command line). 
802         Thanks to Dejan Muhamedagic <dejan@quant-x.com> for the 
803         patch.
804
805 5.      Added the device name and the current volume number
806         as arguments to the end of tape script (dump -F option).
807
808 6.      Made the multi-volume dump work again (after having 
809         broken it in 0.4b15). 
810
811 Changes between versions 0.4b14 and 0.4b15 (released March 2, 2000)
812 ===================================================================
813
814 1.      Added a prompt command in interactive restore mode. Thanks
815         to Andreas Dilger <adilger@home.com> for the patch.
816
817 2.      Fixed a buffer overflow problem in dump (caused by 
818         not checking the size of the filesystem parameter). 
819         Thanks to Kim Yong-jun <loveyou@hackerslab.org> for
820         reporting this on Bugtraq (and to several dump users
821         who forwarded me his mail).
822
823 3.      Added the '-F script' option to dump in order to 
824         launch a script at the end of each tape (to be used
825         with a tape changer, or to notify the sysadmin by
826         pager etc.).
827
828 4.      Fixed a bug in restore compare code caused by the changes 
829         I made in 0.4b14.
830
831 5.      Fixed the treatment of options using the old BSD syntax
832         in both dump and restore.
833
834 Changes between versions 0.4b13 and 0.4b14 (released February 10, 2000)
835 =======================================================================
836
837 1.      Fixed a bug in dump which may have caused invalid deleted 
838         directories to be dumped out if they were deleted after the
839         mapping pass. This could occure on active filesystem and lead
840         to heap corruption (causing dump malfunction in many possible ways).
841         Thanks to Jan Sanislo <oystr@cs.washington.edu> for finding this
842         bug and submitting the patch.
843
844 2.      Fixed the handling of the filesystem parameter in dump. A
845         '/mnt/disk' parameter caused the disk contents to be dumped,
846         but a '/mnt/disk/' parameter caused the mountpoint directory
847         to be dumped (generally an empty directory).
848
849 3.      Improved the output of dump in order to tell which directory
850         it is currently dumping (when dumping a subtree).
851
852 4.      Added the '-e' exclude inode option to dump. Thanks to
853         Isaac Chuang <ike@isl.stanford.edu> for contributing with the patch.
854
855 5.      Added a REPORTING-BUGS file in order to provide a guide
856         on how to correctly report a bug in dump/restore.
857
858 6.      Fixed a restore problem when restoring a hard link to an inode
859         having the immutable or append-only attribute set. Thanks to
860         Ambrose Li <acli@mingpaoxpress.com> for submitting the patch.
861
862 7.      Fixed a compatibility problem between dumps made on little
863         endian machines (the format was correct) and big endian 
864         machines (the format was incorrect). This fix break the
865         compatibility with the older dumps made on big endian 
866         machines (sparc, m86k, ppc etc). For the first time in
867         linux dump's history (I believe), the dumps made by *BSD, 
868         Linux/alpha, Linux/sparc and Linux/x86 are compatible, 
869         so interchangeable. Thanks to Rob Cermak
870         <cermak@ahab.rutgers.edu> for submitting the bug and
871         helping me test the fix.
872
873 8.      Fixed the way dump reports the remaining percent/time, if
874         the number of blocks actually dumped exceeds the estimated
875         number of blocks. Thanks to Jean-Paul van der Jagt 
876         <jeanpaul@dutepp0.et.tudelft.nl> for reporting the bug.
877
878 Changes between versions 0.4b12 and 0.4b13 (released January 21, 2000)
879 ======================================================================
880
881 1.      Small Y2K fix in the man pages :). Thanks to Bernhard Sadlowski
882         <sadlowsk@Mathematik.Uni-Bielefeld.DE> for reporting the bug.
883
884 2.      Removed the requirement to build the RPM as root from the
885         spec file. Thanks to Christian Weisgerber 
886         <naddy@mips.rhein-neckar.de> for submitting this.
887
888 3.      Fixed a bug in dump related to the 'filetype' feature of ext2fs,
889         causing dump to block when dumping really huge filesystems.
890         Many thanks to Patrik Schindler <poc@pocnet.net> for 
891         helping me find this bug.
892
893 4.      Fixed the treatment for an interrupt signal when dump access
894         the remote tape through RSH. Thanks to Christian Weisgerber
895         <naddy@mips.rhein-neckar.de> for providing the patch.
896
897 5.      Fixed a bug which was causing dump/restore to display
898         garbage characters instead of the remote host name.
899
900 Changes between versions 0.4b11 and 0.4b12 (released January 8, 2000)
901 =====================================================================
902
903 1.      Small fix in the dump man page. Thanks to Thorsten Kukuk 
904         <kukuk@suse.de> for submitting the patch.
905
906 2.      Fix for the exit code when using the size estimate option of
907         dump. Thanks to Matti Taskinen <mkt@rni.helsinki.fi> for
908         submitting the patch.
909
910 3.      Handle EINTR in atomical reads/writes in dump, which was causing
911         dump to fail on some systems. Thanks to Eric Jergensen
912         <eric@dvns.com> for reporting the bug and submitting the patch.
913
914 4.      Handle more than 16 characters for the device names in dumpdates.
915         (up to 255 now). Thanks to Rainer Clasen <bj@ncc.cicely.de> for
916         tracking down the problem and proposing the solution.
917
918 5.      Fixed a bug in dump which prevented the creation of the
919         dumpdates file when doing a 0-level dump without already
920         having a dumpdates file. Thanks to Patrik Schindler 
921         <poc@pocnet.net> for reporting the bug.
922
923 6.      Changed the way dump 'S' flag reports the size estimate
924         from number of blocks into bytes (making it compatible
925         with the Solaris version, and simplifying things for
926         amanda users). Thanks to Jason L Tibbitts III 
927         <tibbs@math.uh.edu> for reporting the bug.
928
929 7.      Fixed a compatibility problem in linux/alpha dump tape format.
930         Now the linux/alpha dump are (again) compatible with the
931         other dump formats. But this breaks compatibility with
932         older dumps made on alpha. Thanks to Mike Tibor 
933         <tibor@lib.uaa.alaska.edu> for helping me in finding this bug.  
934
935 Changes between versions 0.4b10 and 0.4b11 (released December 5, 1999)
936 ======================================================================
937
938 1.      Added a '--enable-kerberos' to configure.
939
940 2.      Added a 'S' option to dump which determines the amount of space
941         that is needed to perform the dump without actually doing it, similar
942         to the Sun's ufsdump 'S' option. Patch contributed by Rob Cermak
943         <cermak@ahab.rutgers.edu>.
944
945 3.      Added a 'M' multi-volume option to dump and restore which enables
946         dumping to multiple files (useful when dumping to an ext2
947         partition to make several dump files in order to bypass the 2GB
948         file size limitation). The 'f' argument is treated as a prefix and
949         the output files will be named <prefix>001, <prefix>002 etc. With
950         the 'M' flag, restore automatically selects the right file without
951         asking to enter a new tape each time.
952
953 4.      Fixed a memory leak which was causing dump to grow very big
954         (270MB when dumping a 10GB filesystem...). Thanks to Jason 
955         Fearon <jasonf@netrider.org.au> for reporting the bug.
956
957 Changes between versions 0.4b9 and 0.4b10 (released November 21, 1999)
958 ======================================================================
959
960 1.      Make configure test if the system glob routines support 
961         extended syntax (ALTDIRFUNC). If not, use the internal glob
962         routines instead of system ones. Thanks to Bernhard Sadlowski 
963         <sadlowsk@Mathematik.Uni-Bielefeld.DE> for reporting the bug
964         and helping me resolve this and other minor libc5 compiling
965         glitches.
966
967 2.      Fix a problem when dumping a ext2fs with the 'filetype'
968         feature enabled. Thanks to Patrick J. LoPresti 
969         <patl@cag.lcs.mit.edu> for reporting the bug and to
970         Theodore Y. Ts'o <tytso@mit.edu> for providing the patch.
971
972 3.      Made the nodump flag work on directories. A directory which
973         has the nodump flag gets never dumped, regardless of its
974         contents.
975
976 4.      Integrate a patch from Jeremy Fitzhardinge <jeremy@goop.org>
977         which allows dump on an active ext3 filesystem. However, this
978         is a "quick and dirty" patch which enables backup of an ext3
979         filesystem through the ext2 compatibility (by ignoring the
980         NEEDS_RECOVERY bit). The journal file is not recognized and
981         it is dumped (it should not). 
982
983 5.      Test the superblock compatibility flags when dumping, in order
984         to be sure that we know how to deal with specific features.
985
986 Changes between versions 0.4b8 and 0.4b9 (released November 5, 1999)
987 ====================================================================
988
989 1.      Use lchown instead of chown, fixing a possible security problem 
990         when restoring symlinks (a malicious user could use this
991         to deliberately corrupt the ownership of important system files).
992         Thanks to Chris Siebenmann <cks@utcc.utoronto.ca> for detecting
993         this and providing the patch.
994
995 Changes between versions 0.4b7 and 0.4b8 (released November 3, 1999)
996 ====================================================================
997
998 1.      Put dump sources under CVS, added Id tags in all files so
999         one can use 'ident' on binary files.
1000
1001 2.      Added the dump/restore version in the usage text so one can
1002         easily verify the version he is using.
1003
1004 3.      Small patch from Nuno Oliveira <nuno@eq.uc.pt> which fixes
1005         a va_start/va_end problem on linux-ppc (always call va_start
1006         va_end in pairs each time we use a vararg function).
1007
1008 4.      Added again the DT_* constants because old libc does not
1009         contain them :(. Thanks to Eric Maisonobe <virnet@nat.fr>
1010         for submitting the bug report.
1011
1012 5.      Use ext2fs_llseek instead of llseek. With recent e2fsprogs
1013         this should enable dumping big (huge) filesystems.
1014
1015 6.      Added the RSH environment variable in order to be able to
1016         use a rsh replacement like ssh when doing remote backups (and
1017         bypass the security limitations of rcmd). Now you can do remote
1018         backups without being root (or making dump setuid root).
1019
1020 7.      Modified again the way dumpdates works. For incremental dumps,
1021         we need to read dumpdates even if we are not using 'u' option.
1022         Thanks to Bdale Garbee <bdale@gag.com> for his ideas on how
1023         this should work.
1024
1025 Changes between versions 0.4b6 and 0.4b7 (released October 8, 1999)
1026 ===================================================================
1027
1028 1.      Removed the 'k' flag from the restore 'about' text if kerberos
1029         was not compiled in.
1030
1031 2.      Prototyped (f)setflags from e2fsprogs and corrected the calls
1032         to them (fsetflags takes a char*, setflags an open fd!).
1033
1034 3.      (f)setflags is called only if the flags aren't empty. If the
1035         file is a special file, a warning is printed, because changing
1036         flags implies opening the device. Normally, a special file
1037         should not have any flag... (Debian bug #29775, patch provided
1038         by Abhijit Dasgupta <abhijit@ans.net>).
1039
1040 4.      Made possible to dump a file system not mentioned in /etc/fstab.
1041         (Debian bug #11904, patch provided by Eirik Fuller <eirik@netcom.com>).
1042
1043 5.      Changed the default behaviour to not create dumpdates
1044         unless 'u' option is specified. Removed the old "debian-patch"
1045         which provided the same thing. (Debian bug #38136, #33818).
1046
1047 6.      Removed all those dump*announce, since they were getting old...
1048
1049 7.      Added warning messages if dumpdates does not exist and
1050         when an inferior level dump does not exist (except for a level 0
1051         dump).
1052
1053 8.      Debugged the glob calls in interactive mode: restore used a 
1054         dirent struct which was different from the /usr/include/dirent.h
1055         one (this used to work, is it a glibc2 change?), so none of the 
1056         compat glob (which used /usr/include/dirent.h) or the system glob 
1057         worked. Restore use now the system dirent (and the system 
1058         DT_* constants), which are compatible with BSD ones.
1059
1060 9.      Added a configure flag (--with-dumpdatespath) to specify
1061         the location of dumpdates file. By default, it is 
1062         /etc/dumpdates.
1063
1064 10.     Added the "AUTHOR" and "AVAILABILITY" sections and 
1065         included the current date/version in man pages.
1066
1067 11.     Corrected the estimation of remaining time when
1068         the operator doesn't change the tapes quickly enough. This
1069         was an old bug, I thought I corrected it, and discovered
1070         that in fact it was corrected in two different places, so
1071         the results canceled each other...
1072
1073 Changes between versions 0.4b5 and 0.4b6 (released October 1, 1999)
1074 ===================================================================
1075
1076 1.      Integrated multiple patches from RedHat, Debian and SuSE:
1077
1078         - tweak dump/itime.c to not try to read dumpdates if the 'u' option 
1079           isn't specified.
1080         - several fixes in the man pages.
1081         - update the default tape device to /dev/st0.
1082         - many updates for Linux Alpha (byte ordering, size_t etc).
1083         - buffer overruns.
1084         - use environment variable for TMPDIR (instead of /tmp).
1085         - use sigjmp_buf instead of jmp_buf (RedHat bug #3260).
1086         - workaround egcs bug (RedHat bugs #4281 and #2989).
1087         - wire $(OPT) throughout Makefile's.
1088
1089 2.      Upgrade the dump revision to 1, making possible to dump filesystems
1090         made with e2fsprogs-1.15 or newer. Nothing seems to break...
1091
1092 3.      Fix some compile warnings, prototype all functions.
1093
1094 4.      Use glibc err/glob instead of internal compatibility
1095         routines (only if available).
1096
1097 5.      Fix a compile error on Linux 2.2.7 / libc5 (5.4.44) (patch provided
1098         by Bernhard Sadlowski <sadlowsk@mathematik.uni-bielefeld.de>).
1099
1100 Changes between versions 0.4b4 and 0.4b5 (released September 22, 1999)
1101 ======================================================================
1102
1103 1.      Integrated the changes from FreeBSD-3.1-RELEASE
1104         (mostly bug fixes, buffer overruns, dump has now an "automatic
1105         tape length calculation" flag, dump/restore can use kerberos now
1106         (this is NOT tested), use environment variables for TAPE and
1107         RMT etc.).
1108
1109 2.      Integrated three RedHat patches ("glibc", "kernel" and "bread" patches)
1110
1111 3.      Corrected a bug in restore when using 'C' option with multi-volumes
1112         tapes (files splited accros two tapes give "size changed" errors
1113         when comparing).
1114
1115 4.      Corrected the long standing bug when dumping multiple tapes.
1116         This works for me, needs further testing.
1117
1118 Changes between versions 0.4b3 and 0.4b4 (released January 17, 1997)
1119 ====================================================================
1120
1121 1.      Dump now runs correctly on kernels 2.1.x
1122         Fix made by Gerald Peters <gapeters@worldnet.att.net>
1123
1124 Changes between versions 0.4b2 and 0.4b3
1125 ========================================
1126
1127 1.      Use realpath() if available
1128
1129 2.      Report statistics
1130
1131 Changes between versions 0.4b1 and 0.4b2
1132 ========================================
1133
1134 1.      Fixed the bug fix from Greg Lutz (I had made a mistake when integrating
1135         the patch)
1136
1137 2.      Fixed restore to make it able to read FreeBSD 2.x dumps again
1138
1139 3.      Fixed configure.in to correctly handle --enable-rmt
1140
1141 Changes between versions 0.3 and 0.4b1
1142 ======================================
1143
1144 1.      Integrated the changes from 4.4BSD-Lite2
1145
1146 2.      Integrated the patches from Debian and Red Hat
1147
1148 3.      Portability changes: use the __u32, __u16, __s32, and __s16 types
1149
1150 4.      Changed dump to use the Ext2fs library to get block addresses.  This
1151         should solve the endianness problem on SparcLinux.
1152
1153 5.      Created a configure.in file (shamelessly stolen from the e2fsprogs
1154         distribution's one) to use autoconf
1155
1156 6.      Fixed a few minor bugs
1157
1158 Changes between versions 0.2e and 0.2f
1159 ======================================
1160
1161 1.      Added the creation of named pipes (fifos) in restore.
1162
1163 2.      Added the -N flag in the restore manual page.
1164
1165 3.      Added the file kernel.patch which contains the llseek() optimization
1166         patch for 1.2.x kernels.
1167
1168 4.      Fixed a bug in the restoration of symbolic links: owner and group were
1169         not restored.
1170
1171 5.      Integrated some changes from FreeBSD 2.2.
1172
1173 6.      Added a call to ftruncate() after restoring each file to restore
1174         correctly files ending by a hole.
1175
1176 Changes between versions 0.2d and 0.2e
1177 ======================================
1178
1179 1.      Fixed a bug in the "set owner/mode" process.  Every file was restored
1180         with owner = root (0) and group = root/wheel/whatever (0).
1181
1182 Changes between versions 0.2c and 0.2d
1183 ======================================
1184
1185 1.      Dump is now able to backup 2GB+ filesystems.
1186
1187 2.      Dump and restore can now be linked as static binaries.
1188
1189 Changes between versions 0.2b and 0.2c
1190 ======================================
1191
1192 1.      Fixed a bug when dumping ``slow'' (i.e. normal) symbolic links.
1193
1194 Changes between versions 0.2a and 0.2b
1195 ======================================
1196
1197 1.      Really fixed the bug that I should have corrected in 0.2a.
1198
1199 2.      Enabled optimization again.
1200
1201 Changes between versions 0.2 and 0.2a
1202 =====================================
1203
1204 1.      Disabled the optimization during compilation.
1205
1206 Changes between versions 0.1 and 0.2
1207 ====================================
1208
1209 1.      Fixed a bug in fstab.c which caused a null pointer to be stored in
1210         the fs_type field (actually, I modified the file fstab.c to make it
1211         use the mntent functions).
1212
1213 2.      Dump and restore now use a 4.3 BSD compatible dump format.  Backups
1214         made by dump should be readable by the BSD restore and backups made
1215         by the BSD dump should be readable by restore.  Unfortunately, this
1216         means that the dump format has changed between version 0.1 and version
1217         0.2 :-(
1218
1219 3.      Dump is now able to backup a subtree, it is no longer limited to whole
1220         filesystems like the BSD version.
1221
1222 4.      Dump now uses ext2_llseek() so it is able to backup filesystems bigger
1223         than 2 GB.
1224
1225 Changes between versions 0.0 and 0.1
1226 ====================================
1227
1228 1.      Now create links rdump and rrestore during the `make install' step.
1229
1230 2.      Linux port specific bugs added to the manual pages
1231
1232 3.      Incorrect estimation of the number of tapes blocks fixed when doing
1233         incremental backups.
1234
1235 4.      Better ls-like format in restore in interactive mode.