u-boot:
- add -elf2ldr
- look into struct passing for boot
- - convert to C !
- - setup error handler with newer bootroms (ErrorFunction)
- - for ldr env, make sure to 0xff fill rather than 0x00
- only need one of CFG_ENV_OFFSET and CFG_ENV_ADDR
- - add support for more commands
- - mii
- - spi - need to implement spi_xfer()
- - CONFIG_RMII vs BLACKFIN_MII ?
- for POST code, force it into LDR and only have it work when booting
from an LDR.
- - add net console -- make sure booting up with it works
- - net console: tftp doesnt work ?
- - add support for bedbug
- - bind BF54x RTS/CTS to CONFIG_HWFLOW and convert BFIN_BOOT_UART_USE_RTS
- - relocate RTS cruft to serial.h out of initcode
- - bf54x initcode seems to not work with early serial debug on power reset ?
- - default baud rate depends on CONFIG_CLKIN_HZ which does not match that
- of the reset clock ?
- - i2c (for mainline only)
- - implement newer functions (bus/speed)
gforge frs sort is fucked
+ - so is user names in tracker
.romfs does not get a PHDR, but it works because u-boot reads section
headers only, not program headers
internal is 9 011 ...
-- make linphone/demos/etc more visible on frontpage
-- add doc header tab to frontpage alonside projects/mystuff/etc...
-
bootrom:
- byte count in ldr header is treated as a signed value
- bootrom functions for programming of power and reset