Do not put an extra space between the -j/-z parameter and the value.

[dump.git] / dump / dump.8.in

diff --git a/dump/dump.8.in b/dump/dump.8.in
index 22ed34036b76f39e42ab77254a50e96930df1084..83615977cba80558a410933329d3fc55c6473b39 100644 (file)
--- a/dump/dump.8.in
+++ b/dump/dump.8.in
@@ -30,7 +30,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.\"    $Id: dump.8.in,v 1.36 2002/01/22 11:12:28 stelian Exp $
+.\"    $Id: dump.8.in,v 1.38 2002/02/21 14:07:15 stelian Exp $
 .\"
 .Dd __DATE__
 .Dt DUMP 8
@@ -41,6 +41,7 @@
 .Sh SYNOPSIS
 .Nm dump
 .Op Fl 0123456789ackMnqSu
+.Op Fl A Ar file
 .Op Fl B Ar records
 .Op Fl b Ar blocksize
 .Op Fl d Ar density
@@ -117,11 +118,6 @@ to
 copy all files new or modified since the
 last dump of a lower level.
 The default level is 9.
-.It Fl B Ar records
-The number of 1 kB blocks per volume.
-This option overrides the end-of-media detection, and calculation 
-of tape size based on length and density. If compression is on this
-limits the size of the compressed output per volume.
 .It Fl a
 .Dq auto-size .
 Bypass all tape length calculations, and write
@@ -130,6 +126,13 @@ for most modern tape drives, and is the default.
 Use of this option is particularly recommended when appending to an 
 existing tape, or using a tape drive with hardware compression 
 (where you can never be sure about the compression ratio).
+.It Fl A Ar archive_file
+Archive a dump table-of-contents in the
+specified
+.Ar archive_file
+to be used by 
+.Xr restore 8
+to determine whether a file is in the dump file that is being restored.
 .It Fl b Ar blocksize
 The number of kilobytes per dump record.
 Since the IO system slices all requests into chunks of MAXBSIZE
@@ -140,10 +143,20 @@ Therefore
 .Nm dump
 will constrain writes to MAXBSIZE.
 The default blocksize is 10.
+.It Fl B Ar records
+The number of 1 kB blocks per volume.
+This option overrides the end-of-media detection, and calculation 
+of tape size based on length and density. If compression is on this
+limits the size of the compressed output per volume.
 .It Fl c
 Change the defaults for use with a cartridge tape drive, with a density
 of 8000 bpi, and a length of 1700 feet. Specifying a cartridge drive
 overrides the end-of-media detection.
+.It Fl d Ar density
+Set tape density to
+.Ar density .
+The default is 1600BPI. Specifying a tape density overrides the 
+end-of-media detection.
 .It Fl e Ar inodes
 Exclude 
 .Ar inodes
@@ -159,21 +172,6 @@ The file
 .Ar file
 should be an ordinary file containing inode numbers separated by
 newlines.
-.It Fl h Ar level
-Honor the user
-.Dq nodump
-flag
-.Dp Dv UF_NODUMP
-only for dumps at or above the given
-.Ar level .
-The default honor level is 1,
-so that incremental backups omit such files
-but full backups retain them.
-.It Fl d Ar density
-Set tape density to
-.Ar density .
-The default is 1600BPI. Specifying a tape density overrides the 
-end-of-media detection.
 .It Fl f Ar file
 Write the backup to
 .Ar file ;
@@ -222,6 +220,16 @@ For security reasons,
 .Nm
 reverts back to the real user ID and the real group ID before 
 running the script.
+.It Fl h Ar level
+Honor the user
+.Dq nodump
+flag
+.Dp Dv UF_NODUMP
+only for dumps at or above the given
+.Ar level .
+The default honor level is 1,
+so that incremental backups omit such files
+but full backups retain them.
 .It Fl I Ar nr errors
 By default,
 .Nm
@@ -239,7 +247,8 @@ length blocks. You will need at least the 0.4b24 version of restore in
 order to extract compressed tapes. Tapes written using compression will
 not be compatible with the BSD tape format. The (optional) parameter 
 specifies the compression level bzlib will use. The default compression
-level is 2.
+level is 2. If the optional parameter is specified, there should be no 
+white space between the option letter and the parameter.
 .It Fl k
 Use Kerberos authentication to talk to remote tape servers.  (Only
 available if this option was enabled when
@@ -386,7 +395,8 @@ length blocks. You will need at least the 0.4b22 version of restore in
 order to extract compressed tapes. Tapes written using compression will
 not be compatible with the BSD tape format. The (optional) parameter 
 specifies the compression level zlib will use. The default compression
-level is 2.
+level is 2. If the optional parameter is specified, there should be no 
+white space between the option letter and the parameter.
 .El
 .Pp
 .Nm Dump