-Stelian,
-
- I just got dump running on my system backing up a handful of unix
-servers and at the end of it I wrote a quick and dirty document that lays
-out the answers to some of the questions that I had. I don't want to
-maintain it or get a flood of e-mail from people asking for help on it, so I
-signed it, but intentionally didn't put an e-mail address.
-
- You are welcome to make this prettier, totally discard it, or put it up
-on the web page. I hope it is accurate and relieves some of the common
-questions from the list.
-
-..Patrick
-
-
-
-
Dump/Restore Ultra-Mini-FAQ
-Disclaimer: I am not an expert in dump/restore. In fact,
-I'm a newbie. But I've been picking things up as I
-implement it here and I wanted to pass some of those
-things along in the form of a very basic HOWTO.
+Document v1.1
+
+Disclaimer: I am not an expert in dump/restore. In
+fact, I'm a newbie. But I've been picking things up as
+I implement it here and I wanted to pass some of those
+things along in the form of a very basic FAQ.
-Patrick Walsh
4) Compressing dumps on the fly
5) The "nodump" file and directory attribute.
6) Restoring your dumps (including compressed).
-7) How to confirm a backup
-8) Example backup script
+7) How to confirm a backup (highly recommended)
+8) What are the best buffer size options?
+9) Experiencing bread, lseek, lseek2 errors.
+10) Example backup script
1) Introduction/ Non-rewinding device
You use dump to backup to a file or a tape device. If
-you're backing up to a tape device, then the first thing
-you need to understand is that there are two devices
-that refer to your tape drive. There is the "rewinding"
-device and the "non-rewinding" device.
+you're backing up to a tape device, then the first
+thing you need to understand is that there are two
+devices that refer to your tape drive. There is the
+"rewinding" device and the "non-rewinding" device.
I wish I could tell you an easy way to figure out what
your device names are, but I don't know one. On my
Anyway, through the rest of this I will refer to $TAPE
and $RWTAPE. $TAPE is the non-rewinding device (in my
-case /dev/nst0) and $RWTAPE is the rewinding tape (in my
-case /dev/st0 and /dev/tape). $FS is the filesystem you
-are backing up, such as /dev/hda1.
+case /dev/nst0) and $RWTAPE is the rewinding tape (in
+my case /dev/st0 and /dev/tape). $FS is the filesystem
+you are backing up, such as /dev/hda1.
2) What options should I use?
to dump. I use "dump 0uanf $TAPE $FS".
u=update /etc/dumpdates after a successful dump
- a=auto-size -- bypass all tape length calculations and
- write until eof
+ a=auto-size -- bypass all tape length calculations
+ and write until eof
n=notify 'operators' group when dump needs attention
f=backup to file or device specified, or - for stdout
- 3) You want to send two or more filesystems to the tape.
+ 3) You want to send two or more filesystems to tape.
-OK, rewind using the mt command, then dump multiple times
-to the non-rewinding device, and you're done:
+OK, rewind using the mt command, then dump multiple
+times to the non-rewinding device, and you're done:
mt -f $TAPE rewind
dump 0uanf $TAPE $FS1
dump 0uanf $TAPE $FS2
etc.
-Check the man page of mt if you want to know how to eject
-the tape or retension it or anything.
+Check the man page of mt if you want to know how to
+eject the tape or retension it or anything.
4) You want to compress your dumps on the fly. No
problem. Send your backup to STDOUT and manipulate it
-from there. It's easier if you're sending your output to
-the hard drive:
+from there. It's easier if you're sending your output
+to the hard drive:
dump 0uanf - $FS | gzip -c > /backup/outfile.dump.gz
-You want that to be written to the tape on the fly? Try
-this:
+You want that to be written to the tape on the fly?
+Try this:
mt -f $TAPE rewind
dump 0uanf - $FS |gzip -c |dd if=- of=$TAPE
6) You want to know how to restore your backup.
-Read the restore man page. But barring that, the easy way
-is to use restore in interactive mode. If you have three
-filesystems on one tape and you want to restore files from
-the second one, you need to do this:
+Read the restore man page. But barring that, the easy
+way is to use restore in interactive mode. If you have
+three filesystems on one tape and you want to restore
+files from the second one, you need to do this:
mt -f $TAPE rewind
mt -f $TAPE fsf 1 # skip forward one file
restore -if $TAPE
-OK, suppose now that you used the commands in section 4 to
-compress the dump file before it was written to disk. Use
-this command:
+OK, suppose now that you used the commands in section 4
+to compress the dump file before it was written to
+disk. Use this command:
mt -f $TAPE rewind
mt -f $TAPE fsf 1
dd if=$TAPE of=- |gzip -dc |restore -rf -
-Obviously if you dumped to a file instead of a tape it is
-much easier:
+Obviously if you dumped to a file instead of a tape it
+is much easier:
gzip -dc $filename |restore -rf -
7) How to confirm your backup
- Check out the restore man page and read up on the -C option.
-
- 8) That about sums up my knowledge on the matter, but
-I feel better having written something for other people to
-look at so it doesn't take them quite so long to learn the
-things I did. I've included my backup script below.
-There are much better ones floating around, so go find
-someone else's and use theirs if mine won't work for you
-or you don't understand it.
+ Check out the restore man page and read up on the -C
+option.
+
+ 8) What are the best buffer size options?
+
+ Bernhard R. Erdmann answered this question on the
+dump-users mailing list. His excellent response
+follows:
+
+>> While I was doing google searches, there seems to be
+>> an issue regarding the default buffer size writing
+>> to tape. According to some, the default buffer size
+>> of 512 can harm modern drives. I have a Seagate
+>> DDS3 unit and am wondering what the best mt/dump
+>> options are. I am using datacompression in
+>> hardware. Should I go with a large buffer (mt
+>> setblk 10240) or variable (mt setblk 0). If I
+>> change these sizes, does dump need to know about it?
+>
+>Dump/restore uses a default blocksize of 10 KB. You
+>can change it with the "-b" option or use dd for
+>(re-)blocking.
+>
+>dump 0ab 32 /
+>dump 0af - / | dd obs=32k of=$TAPE
+>ssh host "/sbin/dump 0af - /" | dd obs=32k of=$TAPE
+>restore rb 32
+>dd ibs=32k if=$TAPE | restore rf -
+>ssh host "dd if=/dev/nst0 ibs=32k" | restore rf -
+>
+>Personally, I'd stick with variable blocksize on the
+>drive and use 32 KB as the application's blocksize as
+>Amanda uses that size, too.
+>
+>Rumours told using 64 KB or 128 KB blocksize yields to
+>increase performance (maybe on the mtx list from an
+>Arkeia developer) didn't had any effects in my own
+>tests with blocksizes ranging from 10 to 64 KB some
+>months ago on a DDS-2 drive.
+>
+>Regarding tape drive performance at different block
+>sizes you may want to read
+>http://www.rs6000.ibm.com/support/micro/tapewhdr.html#Header_133
+>
+>- Block size, can effect the time for backup/restore.
+>Using large blocksizes may improve performance. Using
+>small block sizes can increase system overhead but
+>before changing to a large blocksize it is necessary
+>to be sure the user application supports the larger
+>blocksize chosen.
+>- Very long restore times due to blocksize. If a
+>backup is done with a fixed block length then the
+>restore should be done with the same fixed block
+>length. If a backup is done with a fixed block length
+>and the restore is done with variable block length,
+>the restore may work successfully but it may take many
+>more hours to restore than it took to back up the
+>data. The reason for this is that when AIX reads fixed
+>block length data in variable block mode, a check
+>condition is issued by the tape drive on every read.
+>AIX must interpret every check condition and determine
+>the proper action to take. This often will put the
+>tape drive into a mode of reading that will require
+>the tape drive to stop tape motion, rewind the tape
+>some distance, then start reading again. This will
+>reduce the life expectancy of the tape and increase
+>the time it takes to backup data.
+
+ 9) Experiencing bread, lseek, and lseek2 errors.
+
+ These errors are caused by inodes being changed
+during the backup. This is normal because dump and
+the Linux kernel are both acessing the filesystem
+and there is no consistence checking. By "calming"
+the system (killing unnecessary processes), you
+decrease the likelihood of having these
+errors. Read up on the bug on Sourcefourge:
+
+http://sourceforge.net/tracker/index.php?func=detail&aid=204909&group_id=1306&atid=101306
+
+Note that the only "real" solution to this problem
+is to dump a unmounted filesystem or use a filesystem
+snapshot feature (like in LVM).
+
+ 10) That about sums up my knowledge on the matter, but
+I feel better having written something for other peopleto look at so it doesn't take them quite so long to
+learn the things I did. I've included my backup script
+below. There are much better ones floating around, so
+go find someone else's and use theirs if mine won't
+work for you or you don't understand it.
#!/bin/csh
# Otherwise:
# gzip -dc $filename | restore -rf -
+
+
git.wh0rd.org / dump.git / blobdiff